Opens in a new tab

CD4015BE

Dual 4-bit SIPO shift register, common CLK, independent reset, CMOS 3-18V, PDIP-16

3000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4015BE

Package:

PDIP-16 (19.3 x 9.4 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CD4015BE from Texas Instruments contains two independent 4-bit serial-in parallel-out shift registers with common clock and independent reset — a dual CD4014-like device in a 16-pin PDIP package.

Key Specifications

Function Dual 4-bit serial-in parallel-out shift register
Technology CD4000B CMOS
Supply Voltage 3V to 18V
Register Length 4 bits each (2 independent registers)
Serial Input DATA (per register)
Outputs Q1, Q2, Q3, Q4 (per register, all accessible)
Reset Asynchronous, active HIGH (MR, per register)
Max Clock Frequency 6MHz @ VDD=10V
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 9.4mm)

Features

  • Two independent 4-bit shift registers
  • Common clock (CLK) for both registers
  • Independent data inputs and resets
  • All 4 outputs accessible per register
  • Cascadable: Q4 → DATA of next register
  • 3V-18V wide supply range

Applications

  • Serial-to-parallel conversion
  • LED chaser / display driving
  • Temporary data storage
  • Time delay circuits
Product Introduction: CD4015BE Product Introduction

The CD4015BE from Texas Instruments contains two independent 4-bit serial-in parallel-out shift registers sharing a common clock. Each register has its own DATA input, MR (master reset), and four parallel outputs (Q1-Q4). On each rising clock edge, the DATA input is shifted into Q1, and Q1→Q2→Q3→Q4 in a ripple fashion. When MR is HIGH, all outputs are forced to 0 asynchronously. The common clock means both registers shift simultaneously — useful for dual-channel applications where two data streams must be synchronized. The two registers can also be cascaded: Q4 of register 1 connects to DATA of register 2, creating an 8-bit shift register. Unlike the CD4094, the CD4015 has no output latch — outputs change as data shifts through, which is fine for LED chasers but may cause flicker in display applications requiring stable outputs. The CD4015 is simpler and lower-cost than the CD4094 for applications that don’t need latched outputs. The BE suffix denotes the PDIP-16 package.

Working Principle: CD4015BE Working Principle

Each 4-bit shift register in the CD4015BE operates as follows: on each rising CLK edge, DATA is loaded into Q1, and all other bits shift one position (Q1→Q2, Q2→Q3, Q3→Q4). The old Q4 data is lost (or passed to a cascaded register). When MR (master reset) is HIGH, all four outputs (Q1-Q4) are forced to 0 immediately regardless of CLK and DATA. For normal shifting, MR must be LOW. To load 4 bits: shift 4 clock cycles with the desired data on DATA; after 4 clocks, Q1=last bit shifted, Q4=first bit shifted. For cascading: Q4 of register 1 → DATA of register 2; shared CLK; after 8 clocks, register 2 has the first 4 bits and register 1 has the last 4 bits — an 8-bit SIPO. Both registers shift on the same clock edge, so dual data streams can be processed in parallel. The CD4015 is essentially half a CD4014 (8-bit) with separate resets and no parallel load capability.

Pin Description: CD4015BE Pin Definition and Functions
Pin Name Type Description
1 Q4A Output Register A output bit 4 (MSB)
2 Q3A Output Register A output bit 3
3 Q2A Output Register A output bit 2
4 Q1A Output Register A output bit 1 (LSB, first stage)
5 CLK Input Common clock (positive edge)
6 MRA Input Register A master reset (active HIGH)
7 DATA A Input Register A serial data input
8 VSS Power Ground
9 DATA B Input Register B serial data input
10 MRB Input Register B master reset (active HIGH)
11 Q1B Output Register B output bit 1 (LSB)
12 Q2B Output Register B output bit 2
13 Q3B Output Register B output bit 3
14 Q4B Output Register B output bit 4 (MSB)
15 VDD Power Supply (3V to 18V)
16 NC — No connection
Application Scenarios: In which products and applications is CD4015BE used
  • 8-Bit SIPO: Q4A → DATA B; shared CLK; shift 8 bits → 8 parallel outputs from 2 MCU pins
  • Dual 4-LED Chaser: Two independent LED patterns on Q1A-Q4A and Q1B-Q4B; same CLK; different data streams
  • 4-Bit Time Delay: Signal on DATA A; Q1A = 1 clock delay, Q2A = 2, Q3A = 3, Q4A = 4 clock delays
  • Serial-to-Parallel: MCU serial data → DATA A; CLK from MCU; Q1A-Q4A = 4-bit parallel output after 4 clock cycles
Alternative Models: What chips are recommended as replacements for CD4015BE
Model Manufacturer Key Difference Package Supply
CD4015BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4015BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4015BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144015BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC164D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC164N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT164D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4015 is the CMOS 4000-series dual 4-bit serial-in/parallel-out shift register operating over the wide 3-18V supply range. The HEF4015 (NXP) and MC144015 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC164 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1