Opens in a new tab

CD4042BE

Quad clocked D latch, polarity control, complementary outputs, CMOS 3-18V, PDIP-16

4000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4042BE

Package:

PDIP-16 (19.3 x 9.4 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CD4042BE from Texas Instruments is a quad clocked D-type latch with clock polarity control and complementary outputs — four transparent latches in a single 16-pin PDIP package that can be configured for either level-triggered mode.

Key Specifications

Function Quad clocked D latch (4 transparent latches)
Technology CD4000B CMOS
Supply Voltage 3V to 18V
Number of Latches 4 (independent D inputs, common CLK)
Clock Polarity Programmable via POLARITY input
Outputs Q and Q̄ per latch (complementary, buffered)
Propagation Delay 500ns typical @ VDD=5V; 150ns @ 10V
Max Clock Frequency 8MHz @ VDD=10V
Output Current 2.4mA sink / 2.4mA source @ VDD=10V
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 9.4mm)

Features

  • Four D-type latches with common clock
  • Clock polarity control (active-HIGH or active-LOW clock)
  • Complementary Q and Q̄ outputs from each latch
  • Transparent mode: outputs follow D while clock is active
  • Latched mode: outputs hold when clock transitions
  • 3V-18V wide supply range

Applications

  • Buffer storage / data holding registers
  • Address latches for multiplexed buses
  • Debouncing circuits
  • General digital storage
Product Introduction: CD4042BE Product Introduction

The CD4042BE from Texas Instruments contains four D-type transparent latches with a common clock and a unique polarity control input. The POLARITY pin determines whether the latches are transparent when CLOCK is LOW (POLARITY=0) or when CLOCK is HIGH (POLARITY=1). When the clock is at the ‘active’ level (as defined by POLARITY), the Q outputs follow their respective D inputs (transparent mode). When the clock transitions away from the active level, the data present at the D inputs at that moment is latched and held at the Q outputs until the next active clock phase. Each latch provides both Q and Q̄ (complementary) outputs, all fully buffered with balanced CMOS push-pull drivers. The common clock simplifies system design when all four latches must capture data simultaneously (e.g., address latching for multiplexed address/data buses). The polarity feature eliminates the need for an external inverter: if the system clock is active-HIGH, set POLARITY=1; if active-LOW, set POLARITY=0. The 3V-18V supply range covers all common digital voltage levels. The BE suffix denotes the PDIP-16 package.

Working Principle: CD4042BE Working Principle

Each of the four latches in the CD4042BE operates as a transparent D latch with the following behavior controlled by the CLOCK and POLARITY inputs. When POLARITY=0: the latches are transparent when CLOCK=LOW (Q follows D while CLOCK is LOW). When CLOCK transitions from LOW to HIGH (rising edge), the D input value is captured and held. When POLARITY=1: the latches are transparent when CLOCK=HIGH (Q follows D while CLOCK is HIGH). When CLOCK transitions from HIGH to LOW (falling edge), the D input value is captured and held. In both cases, the opposite clock transition re-enables transparency. This is summarized as: the data is transferred to the outputs during the clock level equal to the POLARITY value, and latched on the opposite clock edge. The Q̄ output always provides the complement of Q. The four latches share the same CLOCK and POLARITY inputs, so they all operate in the same mode simultaneously. For address latching in a multiplexed bus system: the address appears on the bus during the active clock phase; the CD4042 captures it on the inactive transition; the latched address is stable while data occupies the bus.

Pin Description: CD4042BE Pin Definition and Functions
Pin Name Type Description
1 Q4 Output Latch 4 complementary output (Q̄4)
2 Q1 Output Latch 1 true output (Q1)
3 Q̄1 Output Latch 1 complementary output (Q̄1)
4 D1 Input Latch 1 data input
5 CLOCK Input Common clock (all 4 latches)
6 POLARITY Input Clock polarity (0=transparent on LOW, 1=transparent on HIGH)
7 D2 Input Latch 2 data input
8 VSS Power Ground
9 Q̄2 Output Latch 2 complementary output (Q̄2)
10 Q2 Output Latch 2 true output (Q2)
11 Q̄3 Output Latch 3 complementary output (Q̄3)
12 Q3 Output Latch 3 true output (Q3)
13 D3 Input Latch 3 data input
14 D4 Input Latch 4 data input
15 Q̄4 Output Latch 4 complementary output (Q̄4)
16 VDD Power Supply (3V to 18V)
Application Scenarios: In which products and applications is CD4042BE used
  • Address Latch: Multiplexed address/data bus → D1-D4; ALE signal → CLOCK; POLARITY=1 (transparent when HIGH); address captured on falling ALE edge; stable address for external memory
  • Data Hold Register: Sensor data → D1-D4; sample pulse → CLOCK; POLARITY=0; data captured on rising clock edge; held between samples
  • Debouncer: Switch → D1; oscillator → CLOCK; POLARITY=1; switch state sampled at clock rate; output free of bounce
  • 4-Bit Comparator Storage: CD4063 comparator outputs → D1-D4; clock latches comparison result; Q outputs held for next processing stage
Alternative Models: What chips are recommended as replacements for CD4042BE
Model Manufacturer Key Difference Package Supply
CD4042BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4042BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4042BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144042BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74LS75D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74LS75N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74LS75D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4042 is the CMOS 4000-series quad clocked d latch operating over the wide 3-18V supply range. The HEF4042 (NXP) and MC144042 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74LS75 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1