Opens in a new tab

CD4060BE

14-stage binary counter + oscillator, CMOS 3-18V, divide by 16384, PDIP-16

5000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4060BE

Package:

PDIP-16 (19.3 x 9.4 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CD4060BE from Texas Instruments is a 14-stage binary ripple counter with an integrated oscillator section that supports both RC and crystal configurations — a one-chip solution for clock generation and frequency division in a 16-pin PDIP package.

Key Specifications

Function 14-stage binary ripple counter/divider + oscillator
Technology CD4000B CMOS
Supply Voltage 3V to 18V
Counter Stages 14 (internal), 10 outputs accessible (Q4-Q14)
Max Clock Frequency 12MHz @ VDD=15V; 8MHz @ 10V; 3MHz @ 5V
Oscillator RC Frequency 690kHz min @ VDD=15V
Reset Asynchronous, active HIGH (MR)
Trigger Negative edge on CP1
Propagation Delay 300ns typical @ VDD=10V (input to Q4)
Transition Time 100ns typical @ VDD=10V
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 9.4mm)

Features

  • Integrated oscillator (RC or crystal)
  • 14-stage binary counter — divide by up to 16384 (2^14)
  • 10 buffered outputs: Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14
  • Schmitt trigger on clock input — unlimited rise/fall times
  • Common asynchronous reset (disables oscillator when HIGH)
  • Fully static operation
  • 3V-18V wide supply range

Applications

  • Time delay circuits
  • Frequency dividers
  • Timer/clock generation (1Hz from 32.768kHz crystal)
  • Digital clocks and watches
  • Control counters
Product Introduction: CD4060BE Product Introduction

The CD4060BE from Texas Instruments combines a CMOS oscillator and a 14-stage binary ripple counter in a single 16-pin DIP package. The oscillator section can be configured as an RC oscillator (using 2 resistors and 1 capacitor) or a crystal oscillator (using 1 crystal, 2 capacitors, and 1 resistor), generating the clock internally. The 14 counter stages divide the oscillator frequency by 2^4 through 2^14 (16 to 16384). Only 10 of the 14 stages have accessible outputs: Q4-Q14. Q1, Q2, and Q3 are internal-only, which means the lowest division ratio available at a pin is divide-by-16 (Q4). The asynchronous reset (MR, pin 12) clears all counter stages and disables the oscillator when HIGH. When MR returns LOW, counting resumes from zero. The Schmitt trigger on the clock input allows unlimited rise and fall times on the clock signal. The CD4060 is the go-to IC for generating long time delays: a 32.768kHz crystal divided by 2^14 (Q14) produces exactly 2Hz; with an additional flip-flop (CD4013), a precise 1Hz clock is obtained. The BE suffix denotes the PDIP-16 package.

Working Principle: CD4060BE Working Principle

The CD4060BE consists of two functional blocks: (1) An oscillator section built around two inverters (pins 9, 10, 11) that can be configured as RC or crystal oscillator. For RC mode: R and C connect between pins 10 and 11, with R from pin 11 to pin 9 and C from pin 10 to pin 9. Frequency ≈ 1/(2.2·R·C). For crystal mode: crystal between pins 10 and 11; capacitors from each pin to ground; feedback resistor from pin 9 to 10. (2) A 14-stage binary ripple counter driven by the oscillator output. Each stage divides by 2. The counter advances on the negative-going transition of the clock. The 14 stages provide division ratios of 2^1 through 2^14, but only Q4 through Q14 have external pins. The missing Q1, Q2, Q3 outputs mean the lowest available output is Q4 (divide by 16). The reset input (MR=HIGH) forces all outputs LOW and stops the oscillator. When MR goes LOW, the oscillator restarts and counting resumes from zero. The Q4-Q14 outputs can be used individually for various frequency divisions or cascaded to other counters for longer counts.

Pin Description: CD4060BE Pin Definition and Functions
Pin Name Type Description
1 Q12 Output Counter output stage 12 (divide by 4096)
2 Q13 Output Counter output stage 13 (divide by 8192)
3 Q14 Output Counter output stage 14 (divide by 16384)
4 Q6 Output Counter output stage 6 (divide by 64)
5 Q5 Output Counter output stage 5 (divide by 32)
6 Q7 Output Counter output stage 7 (divide by 128)
7 Q4 Output Counter output stage 4 (divide by 16)
8 VSS Power Ground
9 ΦO Output Oscillator output (non-inverted)
10 ΦŌ Output Oscillator output (inverted)
11 ΦI Input Oscillator input / external clock input
12 R (MR) Input Master reset (active HIGH, resets counter and disables oscillator)
13 Q9 Output Counter output stage 9 (divide by 512)
14 Q8 Output Counter output stage 8 (divide by 256)
15 Q10 Output Counter output stage 10 (divide by 1024)
16 VDD Power Supply (3V to 18V)
Application Scenarios: In which products and applications is CD4060BE used
  • 1Hz Clock from 32.768kHz Crystal: 32.768kHz crystal on pins 10-11; Q14 = 2Hz; CD4013 flip-flop divides by 2 = 1Hz; drives digital clock seconds
  • RC Timer: R=1MΩ, C=10µF → f≈0.045Hz; Q14 period ≈ 16384/0.045 ≈ 364,000s ≈ 101 hours; long time delay with only 3 external components
  • Frequency Divider Chain: 1MHz input → Q4=62.5kHz, Q7=7.8kHz, Q10=976Hz, Q14=61Hz; multiple tap points from one IC
  • External Clock: Clock signal on pin 11; pins 9 and 10 unused; counter divides external clock by 16 to 16384
Alternative Models: What chips are recommended as replacements for CD4060BE
Model Manufacturer Key Difference Package Supply
CD4060BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4060BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4060BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144060BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC4060D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC4060N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT4060D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4060 is the CMOS 4000-series 14-stage ripple-carry counter/oscillator operating over the wide 3-18V supply range. The HEF4060 (NXP) and MC144060 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC4060 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1