Opens in a new tab

CD4518BE

Dual BCD up-counter, CMOS 3-18V, dual clock/enable, PDIP-16

4000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4518BE

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CD4518BE from Texas Instruments contains two independent synchronous BCD up-counters with clock and enable inputs, each capable of counting 0-9 in BCD in a 16-pin PDIP package.

Key Specifications

Function Dual BCD synchronous up-counter
Technology CD4000B CMOS
Supply Voltage 3V to 18V
Counter Type BCD decade (0-9)
Count Direction Up only
Trigger Positive-edge on CLK (when EN=HIGH) or negative-edge on EN (when CLK=LOW)
Reset Asynchronous, active HIGH (MR)
Max Clock Frequency 6MHz typical @ VDD=10V
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Dual BCD up-counters in one package
  • Two clocking options: CLK edge or EN edge
  • Asynchronous master reset (active HIGH)
  • Cascadable via Q3 output
  • 3V-18V CMOS operation

Applications

  • Frequency counting
  • Event counting (0-9 per digit)
  • Multi-digit BCD displays
  • Timing and sequencing
Product Introduction: CD4518BE Product Introduction

The CD4518BE from Texas Instruments contains two independent BCD (Binary-Coded Decimal) up-counters. Each counter counts from 0 to 9 in BCD (0000 to 1001) and rolls over to 0. The dual clocking scheme offers flexibility: (1) Clock on the CLK pin with EN=HIGH — counting on the rising edge of CLK. (2) Clock on the EN pin with CLK=LOW — counting on the falling edge of EN. This allows either positive-edge or negative-edge triggering. The asynchronous master reset (MR=HIGH) immediately resets all four outputs to 0 regardless of clock. For multi-digit counting, the Q3 output (MSB) of one counter connects to the CLK of the next counter: when the first counter rolls from 9 to 0, Q3 transitions from HIGH to LOW and back — a positive edge on the next counter’s CLK, incrementing the next digit. The CD4518 is simpler than the CD4029 (no up/down or binary/decade selection) but provides two counters in one 16-pin package, making it efficient for multi-digit BCD displays. The BE suffix denotes the PDIP-16 package.

Working Principle: CD4518BE Working Principle

Each BCD counter in the CD4518BE is a 4-bit synchronous counter that sequences through 0000, 0001, 0010, … 1001, then rolls over to 0000. The counter advances when: (a) a rising edge occurs on CLK while EN is HIGH, or (b) a falling edge occurs on EN while CLK is LOW. When neither condition is met, the counter holds its value. The MR (master reset) input is asynchronous: when MR=HIGH, all Q outputs go to 0 immediately regardless of CLK and EN states. For normal counting, MR must be LOW. The Q3 output goes HIGH at count 8 and returns LOW at count 0 (rollover), providing a carry signal for cascading. To cascade for 2-digit (0-99) counting: Q3 of counter 1 → CLK of counter 2; EN of both counters tied HIGH; MR of both tied together for simultaneous reset. For frequency division: Q1 divides clock by 2, Q2 by 4, Q3 provides a pulse every 10 clocks (decade divider). The BCD outputs (Q1-Q4) connect directly to BCD-to-7-segment decoders like CD4511 for display driving.

Pin Description: CD4518BE Pin Definition and Functions
Pin Name Type Description
1 1CLK Input Counter 1 clock (positive edge when 1EN=HIGH)
2 1EN Input Counter 1 clock enable (HIGH=enable, negative edge triggers when 1CLK=LOW)
3 1Q1 Output Counter 1 output LSB
4 1Q2 Output Counter 1 output bit 2
5 1Q3 Output Counter 1 output bit 3
6 1Q4 Output Counter 1 output MSB
7 1MR Input Counter 1 master reset (active HIGH)
8 VSS Power Ground
9 2MR Input Counter 2 master reset (active HIGH)
10 2Q4 Output Counter 2 output MSB
11 2Q3 Output Counter 2 output bit 3
12 2Q2 Output Counter 2 output bit 2
13 2Q1 Output Counter 2 output LSB
14 2EN Input Counter 2 clock enable
15 2CLK Input Counter 2 clock
16 VDD Power Supply (3V to 18V)
Application Scenarios: In which products and applications is CD4518BE used
  • 2-Digit Counter (0-99): Pulses → 1CLK (1EN=HIGH); 1Q4 → 2CLK (2EN=HIGH); both MR tied together; Q1-Q4 each → CD4511 → 7-segment display
  • Decade Divider: Clock → 1CLK; 1Q4 output = pulse every 10 clocks; divide-by-10 frequency divider
  • Divide-by-100: Two CD4518 counters cascaded; 1Q4 → 2CLK; 2Q4 → 3CLK (second chip); 100 pulses per output pulse
  • Event Counter: Sensor pulses → 1CLK; 1EN=HIGH; 1MR=reset button; Q1-Q4 read by MCU or displayed
Alternative Models: What chips are recommended as replacements for CD4518BE
Model Manufacturer Key Difference Package Supply
CD4518BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4518BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4518BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144518BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC4518D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC4518N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT4518D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4518 is the CMOS 4000-series dual bcd up counter operating over the wide 3-18V supply range. The HEF4518 (NXP) and MC144518 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC4518 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1