Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » CP2102N-A02-GQFN28

CP2102N-A02-GQFN28

USB-to-UART bridge (A02 variant), USB 2.0 FS, 3Mbps, OTP, QFN-28

6210

Effective Inventory

Image for reference only

Manufacturer Part:

CP2102N-A02-GQFN28

Package:

28-Pin QFN (5.0 x 5.0 x 0.6 mm with exposed pad)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CP2102N-A02-GQFN28 is a Silicon Labs USB-to-UART bridge controller, A02 variant with different GPIO configuration from A01. It shares the same core features: USB 2.0 full-speed, up to 3 Mbps UART, integrated transceiver and oscillator, 1 KB OTP, and 4 configurable GPIO. Packaged in 28-pin QFN (5×5 mm), -40C to +85C.

Key Specifications

USB USB 2.0 Full-Speed
UART Baud Rate Up to 3 Mbps
Supply Voltage 2.2 V to 3.6 V
OTP Memory 1 KB
GPIO 4 configurable (A02 config)
Package QFN-28 (5×5 mm)

Features

  • No firmware development required
  • USB 2.0 full-speed with integrated transceiver
  • Up to 3 Mbps UART data rate
  • 1 KB OTP for custom VID/PID
  • A02 GPIO variant configuration
  • USB Battery Charger Detection
  • Royalty-free VCP drivers

Applications

  • USB-to-serial adapters
  • MCU programming interfaces
  • IoT device connectivity
  • Industrial USB bridges
Product Introduction: CP2102N-A02-GQFN28 Product Introduction

The CP2102N-A02-GQFN28 is a Silicon Labs USB-to-UART bridge controller, A02 variant with a different GPIO default configuration compared to the A01 variant. It provides USB 2.0 full-speed to UART conversion with data rates up to 3 Mbps, requiring no firmware development. The integrated USB transceiver, clock oscillator, and voltage regulator minimize external components. The 1 KB OTP configuration memory allows custom USB descriptors (VID/PID, product strings). The A02 variant pre-configures GPIO pins with different default functions suited for specific application scenarios. USB Battery Charger Detection per BCS 1.2 is included. Royalty-free VCP drivers support Windows, macOS, and Linux. Packaged in 28-pin QFN (5×5 mm).

Working Principle: CP2102N-A02-GQFN28 Working Principle

The CP2102N-A02 operates identically to the A01 variant. The USB device controller handles enumeration, flow control, and protocol management. The 48 MHz internal oscillator provides the USB clock. The UART controller supports baud rates up to 3 Mbps with configurable data format. The 1 KB OTP stores custom USB descriptors programmed once during manufacturing. The A02 variant differs only in GPIO pin pre-configuration (default functions and pull-up/down states), which can be further customized through the Silicon Labs configurator tool before OTP programming.

Pin Description: CP2102N-A02-GQFN28 Pin Definition and Functions

Same 28-pin QFN pinout as CP2102N-A01: D+/D-, VBUS, VREGIN, VDD, GND, TX, RX, RTS, CTS, DTR, DSR, GPIO.0-GPIO.3 (A02 default config), RSTb, SUSPEND/SUSPENDB. Refer to datasheet for complete 28-pin mapping and A02 GPIO default assignments.

Application Scenarios: In which products and applications is CP2102N-A02-GQFN28 used
  • USB-to-serial adapter with A02 GPIO variant for specific handshake pin routing
  • MCU debug and programming interface with custom VID/PID via OTP
  • IoT device USB connectivity with battery charger detection
  • Legacy serial equipment USB bridge with A02 GPIO configuration
Alternative Models: What chips are recommended as replacements for CP2102N-A02-GQFN28
Model Manufacturer Key Difference
CP2102N-A01-GQFN28 Silicon Labs A01 GPIO variant
CP2104-F01-GQFN24 Silicon Labs Smaller QFN-24, fewer GPIO
FT232RL FTDI USB-UART, SSOP-28
CH340G WCH Lower cost, SOP-16

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1