Opens in a new tab

CSTCE8M00G15C99-R0

8MHz ceramic resonator (CERALOCK), 3-terminal, built-in 15pF, +/-0.1%, AEC-Q200

28862

Effective Inventory

Image for reference only

Manufacturer Part:

CSTCE8M00G15C99-R0

Package:

3-terminal SMD 3.2 x 1.3 x 0.8 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CSTCE8M00G15C99-R0 is an automotive-grade ceramic resonator (CERALOCK) from Murata, featuring 8MHz frequency with built-in 15pF load capacitors in a compact 3-terminal surface-mount package. AEC-Q200 qualified, it provides a self-contained clock solution requiring no external components, simplifying PCB layout in automotive applications.

Key Specifications

Frequency 8.000 MHz
Frequency Tolerance +/-0.1% (+/-1000ppm)
Built-in Capacitance 15pF (each side)
Operating Temperature -40C to +125C
Package / Case 3-terminal SMD (3.2 x 1.3 x 0.8 mm)
Qualification AEC-Q200

Features

  • AEC-Q200 automotive qualified
  • Built-in 15pF load capacitors – no external C needed
  • 8MHz common MCU clock frequency
  • 3-terminal compact package (3.2 x 1.3mm)
  • Self-contained clock solution

Applications

  • Automotive MCU clock reference
  • Industrial controller timing
  • Consumer electronics MCU clock
  • Simple oscillator replacement
Product Introduction: CSTCE8M00G15C99-R0 Product Introduction

The CSTCE8M00G15C99-R0 is an automotive-grade ceramic resonator (CERALOCK) from Murata, featuring 8MHz frequency with built-in 15pF load capacitors in a compact 3-terminal surface-mount package. AEC-Q200 qualified, it provides a self-contained clock solution requiring no external components, simplifying PCB layout and reducing BOM cost compared to crystal + external capacitor solutions. The +/-0.1% frequency tolerance is adequate for most MCU timing requirements including UART communication.

Working Principle: CSTCE8M00G15C99-R0 Working Principle

The CSTCE8M00G15C99-R0 operates as a ceramic resonator with integrated load capacitors:

1. Piezoelectric Ceramic: Unlike a quartz crystal which uses a single AT-cut blank, the ceramic resonator uses a PZT (lead zirconate titanate) ceramic element that vibrates at its mechanical resonant frequency. The frequency stability (+/-0.1%) is lower than a quartz crystal (+/-20ppm) but sufficient for most MCU applications.

2. Built-in Capacitors: The 15pF load capacitors are integrated into the package, eliminating two external components. This simplifies PCB layout, reduces BOM count, and ensures the resonator is always operated with the correct load capacitance.

3. Oscillator Circuit: Like a crystal, the ceramic resonator is used as the frequency-determining element in a Pierce oscillator circuit within the MCU. The three terminals connect to OSC_IN, GND, and OSC_OUT.

4. Frequency Accuracy: The +/-0.1% (+/-1000ppm) tolerance is adequate for UART baud rate generation (typically requires <2% accuracy) and general MCU timing, but not for precision timekeeping or high-speed USB.

5. AEC-Q200: Automotive qualification ensures frequency stability is maintained under thermal cycling and vibration.

Pin Description: CSTCE8M00G15C99-R0 Pin Definition and Functions
Pin Name Type Function
1 OSC_IN (Input) Passive Connects to MCU XTAL1 / OSC_IN pin. Built-in 15pF cap to GND.
2 GND Ground Ground connection for built-in capacitors
3 OSC_OUT (Output) Passive Connects to MCU XTAL2 / OSC_OUT pin. Built-in 15pF cap to GND.

Note: 3-terminal device. Pin 2 (GND) must be connected to PCB ground for the built-in capacitors to function correctly. No external load capacitors are needed.

Application Scenarios: In which products and applications is CSTCE8M00G15C99-R0 used
Application Circuit Role Key Requirement
Automotive MCU 8MHz clock reference (no ext C) 8MHz, built-in 15pF, AEC-Q200
Industrial Controller MCU timing oscillator 8MHz, 3-terminal, simple
Consumer Electronics Low-cost clock solution 8MHz, no external caps needed
UART Communication Baud rate clock source +/-0.1%, adequate for UART
Space-Constrained Miniaturized clock (3.2 x 1.3mm) 3-terminal, 8MHz, compact
Alternative Models: What chips are recommended as replacements for CSTCE8M00G15C99-R0
Manufacturer Part Number Package Key Specs Notes
Murata CSTCE8M00G15-R0 3-terminal 8MHz, built-in 15pF, commercial Commercial grade version
Murata CSTCE8M00G52-R0 3-terminal 8MHz, built-in 5pF, AEC-Q200 Different CL value
Epson FA-20X 8.0000MF20V-W0 3225 8MHz crystal, +/-20ppm, AEC-Q200 Crystal (needs ext C)
ABRACON ABM8-8.000MHZ-20-B2X-T 3225 8MHz crystal, +/-20ppm Crystal (needs ext C)
NDK NX3225GA 8.000M-STD-CRA-6 3225 8MHz crystal, +/-20ppm, AEC-Q200 Crystal (needs ext C)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1