Opens in a new tab

CY2304SXI-1T

3.3V zero delay clock buffer, 4-out, PLL, 10-133MHz, 90ps jitter, SOIC-8

6234

Effective Inventory

Image for reference only

Manufacturer Part:

CY2304SXI-1T

Package:

SOIC-8 (150-mil, 3.9 x 4.9 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CY2304SXI-1T is a 3.3V zero delay clock buffer from Infineon Technologies (formerly Cypress) with 4 outputs, on-chip PLL, 10-133 MHz operating range, and 90 ps typical jitter in an 8-pin SOIC package. The -1 configuration provides 1:1 output-to-reference frequency ratio.

Key Specifications

Type Zero Delay Clock Buffer
Number of Outputs 4 (2 banks of 2)
Configuration -1: All outputs = Reference frequency
Operating Frequency 10 MHz to 133 MHz
Input-Output Skew < 250 ps
Output-to-Output Skew < 200 ps
Cycle-to-Cycle Jitter 90 ps typical (66 MHz, 15 pF)
Supply Voltage 3.0 V to 3.6 V
Supply Current 45 mA max (100 MHz, unloaded)
Power-Down Current 25 µA max
Operating Temperature -40°C to +85°C (Industrial)
Package SOIC-8 (150-mil)

Features

  • Zero input-output propagation delay via on-chip PLL
  • Adjustable delay via capacitive load on FBK pin
  • Two banks of two low-skew outputs each
  • 90 ps typical cycle-to-cycle jitter
  • Power-down mode: outputs three-stated, PLL off, <25 µA
  • Space-saving 8-pin SOIC package
  • Multiple device synchronization (<500 ps device-to-device skew)

Applications

  • PC and workstation clock distribution
  • Data communications equipment
  • Telecom systems
  • High-performance clock trees
  • Embedded processor clocking
Product Introduction: CY2304SXI-1T Product Introduction

The CY2304SXI-1T is a 3.3V zero delay clock buffer from Infineon Technologies designed to distribute high-speed clocks in PC, workstation, datacom, telecom, and other high-performance applications. It features an on-chip phase-locked loop (PLL) that locks to the input clock on the REF pin, with feedback driven into the FBK pin from one of the outputs. The input-to-output skew is guaranteed less than 250 ps, and output-to-output skew is guaranteed less than 200 ps. The -1T configuration provides all four outputs at the reference frequency with 1:1 ratio. The device enters power-down mode when no rising edges are detected on REF, three-stating all outputs and reducing current to below 25 µA.

Working Principle: CY2304SXI-1T Working Principle

The CY2304 uses an on-chip PLL to achieve zero input-to-output propagation delay. The PLL consists of a phase detector, loop filter, and voltage-controlled oscillator (VCO). The phase detector compares the REF input with the FBK feedback signal and adjusts the VCO to minimize phase error. The feedback path must be routed from one of the outputs back to the FBK pin, which effectively includes the output buffer delay in the PLL feedback loop. This means the PLL compensates for the output buffer propagation delay, achieving near-zero delay from REF to the outputs. The delay can be fine-tuned by adding capacitive loading on the FBK pin, which slightly increases the feedback path delay and correspondingly advances the output timing. Multiple CY2304 devices can be synchronized by driving them from the same REF clock, with device-to-device skew guaranteed below 500 ps.

Pin Description: CY2304SXI-1T Pin Definition and Functions
Pin Name Type Description
1 REF Input Reference clock input (LVCMOS/LVTTL)
2 CLKA1 Output Bank A output 1
3 CLKA2 Output Bank A output 2
4 GND Power Ground
5 CLKB1 Output Bank B output 1
6 CLKB2 Output Bank B output 2
7 FBK Input PLL feedback input (connect from CLKA1 or CLKB1)
8 VDD Power Supply voltage (3.3V)
Application Scenarios: In which products and applications is CY2304SXI-1T used
  • PC Clock Distribution: Zero delay buffer distributes motherboard clocks to CPU, chipset, and memory with minimal skew
  • Datacom Equipment: 90 ps jitter performance ensures timing margins in high-speed networking clock trees
  • Multi-Board Systems: Device-to-device skew below 500 ps enables synchronized clocking across multiple boards
  • Processor Clocking: Low-skew 4-output buffer provides synchronous clocks to multi-core processors and peripherals
  • Power-Managed Systems: Automatic power-down when REF clock stops reduces standby power to below 25 µA
Alternative Models: What chips are recommended as replacements for CY2304SXI-1T
Model Manufacturer Key Difference Package Specs
CY2304SXI-2T Infineon Configurable ÷2/×2 output frequencies – –
CY2305SC-1 Infineon Single bank, 5 outputs, commercial temp – –
PI49FCT3807QE Diodes Inc 1:10 clock buffer, similar function – –
ICS557-03 Renesas Zero delay buffer with 6 outputs – –
NB3N5573 onsemi 3.3V zero delay buffer, 5 outputs – –

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1