Opens in a new tab

Home » Integrated Circuits ICs, Sensors » CY8CMBR3116-LQXI

CY8CMBR3116-LQXI

CapSense Express 16-Ch Touch Controller, Auto-Tune, Proximity, I2C, QFN-24

6321

Effective Inventory

Image for reference only

Manufacturer Part:

CY8CMBR3116-LQXI

Package:

QFN-24 (4 x 4 x 0.55 mm, exposed pad)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CY8CMBR3116-LQXI from Infineon (formerly Cypress) is a CapSense Express 16-channel capacitive touch sensor controller with auto-tuning, proximity detection, and smart sensing features in a 24-pin QFN package.

Key Specifications

Type CapSense Express Capacitive Touch Controller
CapSense Channels 16
Proximity Sensors 2
Auto-Tuning Yes (SmartSense)
Supply Voltage 1.71 V to 5.5 V
I2C Interface Yes (up to 400 kHz)
Operating Current 5 mA (active), 15 uA (sleep)
Package QFN-24 (4 x 4 mm)
Operating Temperature -40°C to 85°C

Features

  • 16 capacitive sensing inputs with SmartSense auto-tuning
  • 2 proximity sensing channels
  • No external components required
  • Automatic environmental compensation
  • I2C host interface for configuration
  • Low power sleep mode (15 uA)

Applications

  • Consumer electronics touch interfaces
  • Home appliance control panels
  • Industrial HMI touch buttons and sliders
  • Automotive interior touch controls
  • Wearable device proximity detection
Product Introduction: CY8CMBR3116-LQXI Product Introduction

The CY8CMBR3116-LQXI from Infineon is a CapSense Express capacitive touch sensing controller providing 16 capacitive sensing channels and 2 proximity sensing channels. The device features Infineon’s SmartSense auto-tuning algorithm that automatically compensates for environmental changes such as temperature, humidity, and PCB variations without requiring manual tuning. The I2C interface enables host MCU configuration and status reading. With no external components required for touch sensing, the device simplifies PCB layout and reduces BOM cost. The 15 uA sleep mode current supports battery-powered applications.

Working Principle: CY8CMBR3116-LQXI Working Principle

The CY8CMBR3116-LQXI uses a capacitive sensing method based on delta-sigma modulation. Each CapSense input is connected to a switched-capacitor circuit that measures the capacitance change when a finger approaches or touches the sensor pad. The SmartSense auto-tuning algorithm continuously monitors baseline capacitance and adjusts detection thresholds to compensate for environmental drift. When a touch or proximity event is detected, the corresponding status register bit is updated and can be read by the host MCU via I2C. The device supports multiple widget types including buttons, sliders, and proximity sensors. The proximity channels provide extended detection range for hand-sweep gestures. In sleep mode, the device periodically scans sensors at a reduced rate to conserve power while maintaining responsiveness.

Pin Description: CY8CMBR3116-LQXI Pin Definition and Functions
Pin Group Name Type Function
16 pins CS0-CS15 Input CapSense sensing inputs
2 pins PRX0-PRX1 Input Proximity sensing inputs
2 pins SDA/SCL I/O I2C data and clock
2 pins VDD/VSS Power Supply and ground
1 pin RST Input Active low reset
1 pin INT Output Interrupt output to host
Pad EP Ground Exposed pad (connect to GND)
Application Scenarios: In which products and applications is CY8CMBR3116-LQXI used
  • White goods and home appliance touch button panels
  • Consumer electronics with capacitive touch UI
  • Industrial equipment HMI with rugged touch sensing
  • Proximity detection for smart home wake-up features
  • Wearable and portable device touch interfaces
Alternative Models: What chips are recommended as replacements for CY8CMBR3116-LQXI
Manufacturer Part Number Package Notes
Infineon CY8CMBR3108-LQXI QFN-24 8-channel variant
Infineon CY8CMBR3110-SXQI QFN-32 10-channel, more I/O
Microchip AT42QT1070-MUR QFN-28 7-channel touch sensor
STMicroelectronics STM8T141 SO-8 1-channel proximity touch
Azoteq IQS127D-00000 DFN-8 Proximity/touch controller

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1