Opens in a new tab

DB207S

2A 1000V single-phase glass-passivated bridge rectifier, DBS SMD package

12974

Effective Inventory

Image for reference only

Manufacturer Part:

DB207S

Package:

DBS (4-SMD Gull Wing) – 8.5 x 6.2 x 2.6 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DB207S is a single-phase glass-passivated silicon bridge rectifier rated at 2A average rectified output current and 1000V peak repetitive reverse voltage, packaged in a compact DBS surface-mount package. Designed for general-purpose AC-to-DC rectification, this bridge rectifier features low forward voltage drop, high surge current capability, and compliance with RoHS requirements.

Key Specifications

Peak Repetitive Reverse Voltage (VRRM) 1000V
Average Rectified Output Current (IO) 2.0A
Maximum Forward Voltage (VF) 1.0V to 1.1V per element @ IF=2A
Peak Forward Surge Current (IFSM) 60A @ 8.3ms single half-sine
Maximum Reverse Current (IR) 5 uA @ 25degC, rated VR
I2t Rating 14.94 A2s
Operating Temperature -55degC to +150degC (TJ)
Package DBS (4-SMD, Gull Wing)

Features

  • 1000V reverse voltage rating suitable for direct off-line rectification
  • 2A average output current with glass-passivated junction for reliability
  • High surge current capability of 60A for robust transient handling
  • Low forward voltage drop of 1.0V typical per element for efficiency
  • Compact DBS surface-mount package for automated PCB assembly

Applications

  • AC-to-DC power supply rectification in consumer electronics
  • Off-line switch-mode power supply input stages
  • Battery charger rectifier circuits
  • Industrial control power supply bridges
  • Home appliance and white goods power supplies
Product Introduction: DB207S Product Introduction

The DB207S is a single-phase glass-passivated silicon bridge rectifier rated at 2A and 1000V in a DBS surface-mount package. Part of the DB201S through DB207S family covering 50V to 1000V, this device integrates four rectifier diodes in a Graetz bridge configuration for full-wave AC-to-DC conversion. The glass-passivated junction construction ensures reliable operation and low reverse leakage, while the DBS gull-wing package enables easy surface-mount assembly with visual solder joint inspection. With a peak forward surge current rating of 60A and operating temperature range of -55degC to +150degC, the DB207S is suitable for demanding power supply applications.

Working Principle: DB207S Working Principle

The DB207S contains four glass-passivated silicon diodes connected in a full-wave Graetz bridge configuration. During the positive half-cycle of the AC input, two diagonally opposite diodes conduct, routing current through the load in one direction. During the negative half-cycle, the other two diodes conduct, maintaining the same current direction through the load. This full-wave rectification doubles the output frequency compared to half-wave rectification, resulting in lower ripple amplitude and easier filtering. The glass-passivated junction technology provides improved reverse leakage characteristics and thermal stability compared to standard planar junctions. The bridge configuration inherently blocks reverse voltage from reaching the output, as the non-conducting pair of diodes always presents the full reverse voltage rating to the AC source.

Pin Description: DB207S Pin Definition and Functions
Pin Name Type Function
1 AC Input (~) Input AC input connection 1
2 AC Input (~) Input AC input connection 2
3 DC Output (+) Output Positive DC output
4 DC Output (-) Output Negative DC output (ground reference)
Application Scenarios: In which products and applications is DB207S used
  • Offline SMPS front-end rectification for 110V/220V AC mains input
  • Battery charger AC-to-DC rectification in consumer and industrial devices
  • Home appliance motor drive and control power supply bridges
  • LED lighting power supply AC input rectification stage
  • Industrial PLC and sensor 24VAC-to-DC power conversion
Alternative Models: What chips are recommended as replacements for DB207S
Manufacturer Part Number Package Notes
Diodes Inc DB207S DBS 2A 1000V bridge rectifier
onsemi MB2S MBS 2A 200V bridge, similar family
Vishay MB2M MBS 2A 1000V bridge rectifier
WPG GBJ1510 GBJ 15A 1000V bridge (higher power)
Good-Ark GBPC1506 GBPC 15A 600V (through-hole)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1