Opens in a new tab

DHT11

Digital temperature + humidity sensor, 0-50C +/-2C, 20-90%RH +/-5%, single-wire

12027

Effective Inventory

Image for reference only

Manufacturer Part:

DHT11

Package:

4-pin through-hole (blue body)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DHT11 is a basic, low-cost digital temperature and humidity sensor. It provides calibrated digital output with 8-bit temperature resolution (0-50C, +/-2C) and 8-bit humidity resolution (20-90% RH, +/-5%). Communication uses a single-wire proprietary protocol. Packaged in a 4-pin through-hole module.

Key Specifications

Temperature Range 0 to 50C
Temperature Accuracy +/-2C
Temperature Resolution 8-bit (1C)
Humidity Range 20% to 90% RH
Humidity Accuracy +/-5% RH
Humidity Resolution 8-bit (1% RH)
Interface Single-wire digital (proprietary)
Supply Voltage 3.3V to 5.5V
Sampling Period 1 second (minimum)
Operating Temperature 0 to +50 C

Features

  • Combined temperature and humidity sensing
  • Single-wire digital interface
  • Calibrated digital output
  • 3.3V to 5.5V supply range
  • Low cost for hobbyist and educational use

Applications

  • Weather stations and home automation
  • HVAC monitoring
  • Greenhouse environmental control
  • Educational and hobbyist projects
Product Introduction: DHT11 Product Introduction

The DHT11 is a basic, ultra-low-cost digital temperature and humidity sensor. Inside the sensor, a resistive humidity sensing element and a negative temperature coefficient (NTC) thermistor are paired with an 8-bit microcontroller that provides calibrated digital output via a single-wire bidirectional protocol. The 8-bit resolution gives 1C temperature steps and 1% RH humidity steps, adequate for basic environmental monitoring. The sensor requires a minimum 1-second interval between readings. Its extremely low cost makes it one of the most popular sensors in Arduino and Raspberry Pi projects, though it is not suitable for precision measurement applications.

Working Principle: DHT11 Working Principle

The DHT11 combines a humidity-dependent resistive element and an NTC thermistor on a single substrate with a built-in 8-bit MCU. The MCU reads the analog sensors, digitizes the data, and stores calibrated 8-bit values for temperature and humidity. Communication uses a single-wire protocol: the host pulls the data line low for at least 18ms to start a conversion, then releases it. The DHT11 responds by pulling the line low for 80us, then high for 80us, followed by 40 bits of data (8-bit humidity integer + 8-bit humidity decimal + 8-bit temperature integer + 8-bit temperature decimal + 8-bit checksum). Each bit is encoded by the duration of the high pulse: 26-28us for 0, approximately 70us for 1.

Pin Description: DHT11 Pin Definition and Functions
Pin Name Function
1 VDD Power supply (3.3-5.5V)
2 DATA Single-wire data I/O (pull-up resistor required)
3 NC Not connected
4 GND Ground
Application Scenarios: In which products and applications is DHT11 used
  • Home weather stations and indoor climate monitoring with +/-2C temperature accuracy
  • HVAC humidity and temperature monitoring for basic environmental control
  • Greenhouse automation with combined temperature and humidity in a single sensor
  • Educational Arduino/Raspberry Pi projects requiring low-cost environmental sensing
Alternative Models: What chips are recommended as replacements for DHT11
Model Manufacturer Key Difference
DHT22 Aosong -40~80C, +/-0.5C, 0-100%RH, higher accuracy
SHT31-D Sensirion I2C, +/-0.3C, +/-2%RH, precision
BME280 Bosch I2C/SPI, temp+humidity+pressure
Si7021 Silicon Labs I2C, +/-0.4C, +/-3%RH, low power

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1