Opens in a new tab

DLP11SN900HL2

0805 common mode choke, 90Ohm Zcm @100MHz, 0.5Ohm Zdm, 200mA, 5V for USB/HDMI EMI filtering

10941

Effective Inventory

Image for reference only

Manufacturer Part:

DLP11SN900HL2

Package:

0805 (2.00 x 1.25 x 1.00 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DLP11SN900HL2 from Murata is a common mode choke filter designed for high-speed differential signal lines in an 0805 (2.0×1.25×1.0mm) package. It provides 90Ohm common-mode impedance at 100MHz with only 0.5Ohm differential-mode impedance, supporting USB 2.0 and HDMI signal integrity while suppressing common-mode EMI noise.

Key Specifications

Type Common Mode Choke Filter
Common-Mode Impedance 90Ohm @ 100MHz
Differential-Mode Impedance 0.5Ohm (Max) @ 100MHz
Rated Current 200mA
Rated Voltage 5V DC
Insulation Resistance 10MOhm (Min)
Package 0805 (2.0 x 1.25 x 1.0mm)
Operating Temperature -40°C ~ +85°C

Features

  • High common-mode impedance (90Ohm) for effective EMI suppression
  • Low differential-mode impedance (0.5Ohm) preserves signal integrity
  • Compact 0805 footprint for dense PCB layouts
  • Optimized for USB 2.0 (480Mbps) and HDMI differential lines
  • Rated for 5V DC operation at 200mA
  • High insulation resistance for signal isolation
  • Reflow solder compatible

Applications

  • USB 2.0 port EMI filtering
  • HDMI common-mode noise suppression
  • DisplayPort signal line filtering
  • LVDS and MIPI differential pair filtering
  • General high-speed differential signal EMI countermeasures
Product Introduction: DLP11SN900HL2 Product Introduction

The DLP11SN900HL2 from Murata is a surface-mount common mode choke filter designed for EMI suppression on high-speed differential signal lines. It provides 90Ohm of common-mode impedance at 100MHz, effectively attenuating common-mode noise that causes radiated emissions, while maintaining a low 0.5Ohm differential-mode impedance that preserves signal integrity on the differential pair. The device is specifically optimized for USB 2.0 (480Mbps) and HDMI applications where both signal quality and EMI compliance are critical. The compact 0805 (2.0 x 1.25 x 1.0mm) package allows placement in space-constrained areas near connectors. The 200mA rated current and 5V DC rated voltage cover typical USB and HDMI bus power requirements. Murata’s DLW/DLP series is widely used in consumer electronics for CE and FCC emissions compliance.

Working Principle: DLP11SN900HL2 Working Principle

The DLP11SN900HL2 uses two magnetically coupled windings on a ferrite core to selectively attenuate common-mode noise while passing differential signals. When differential signal currents flow through the two windings in opposite directions, their magnetic fields cancel in the core, resulting in very low impedance (0.5Ohm) that does not distort the desired signal. When common-mode noise currents flow through both windings in the same direction, their magnetic fields add constructively, creating high impedance (90Ohm) that blocks the noise. This selective filtering mechanism allows the common mode choke to suppress EMI from sources like clock harmonics and switching noise without degrading the high-speed differential signal quality. The ferrite core material is optimized for the 100MHz to 1GHz frequency range where most common-mode emissions occur in digital systems.

Pin Description: DLP11SN900HL2 Pin Definition and Functions
Pin Name Function
1 Line 1A Differential pair positive (USB D+ / HDMI data+)
2 Line 1B Differential pair positive (output side)
3 Line 2A Differential pair negative (USB D- / HDMI data-)
4 Line 2B Differential pair negative (output side)
Application Scenarios: In which products and applications is DLP11SN900HL2 used
  • USB 2.0 Port EMI Filter: 90Ohm common-mode impedance suppresses radiated emissions from USB 2.0 D+/D- traces to pass CE/FCC compliance; 0.5Ohm differential impedance maintains signal eye diagram
  • HDMI Interface Filter: Filters common-mode noise on TMDS clock and data pairs; compact 0805 fits near HDMI connector on dense graphics card layouts
  • DisplayPort Signal Conditioning: Attenuates common-mode noise from high-speed 1.62-5.4Gbps lanes without degrading differential signal quality
  • MIPI D-PHY Filter: Suppresses common-mode emissions from camera and display MIPI interfaces in smartphones and tablets
Alternative Models: What chips are recommended as replacements for DLP11SN900HL2
Model Manufacturer Key Difference
DLP11SN121HL2 Murata 120Ohm common-mode, same footprint
DLP11SN900SL2 Murata Same impedance, different construction
DLW21SN900SQ2 Murata 0805, 90Ohm, higher current (350mA)
ACM2012-900-2P-T TDK 0805, 90Ohm, USB 2.0/HDMI
GH70M2P900V1E TDK 0603, 90Ohm, smaller footprint

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1