Opens in a new tab

DP83848IVVX

10/100 Ethernet PHY, MII/RMII, LQFP-48

11508

Effective Inventory

Image for reference only

Manufacturer Part:

DP83848IVVX

Package:

LQFP-48 (7.0 x 7.0 x 1.40 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

DP83848IVVX Overview

The DP83848IVVX is a 10/100Mbps Ethernet physical layer transceiver (PHY) from Texas Instruments supporting MII/RMII/SNI interfaces with built-in Auto-MDIX, IEEE 802.3u compliant, in an LQFP-48 package, widely used in embedded Ethernet applications.

Key Features

  • Speed: 10/100Mbps
  • Interface: MII/RMII/SNI
  • Supply voltage: 3.3V
  • Auto-MDIX
  • IEEE 802.3u compliant
  • Built-in JTAG interface
Product Introduction: DP83848IVVX Product Introduction

The DP83848IVVX is a single-port 10/100 Mbps Ethernet physical layer (PHY) transceiver from Texas Instruments in a 48-pin LQFP (7 x 7 mm) package, designed for industrial temperature range (-40 C to +85 C). It implements the full IEEE 802.3 physical layer for 10BASE-T and 100BASE-TX Ethernet, featuring Auto-MDIX, MII/RMII/SNI MAC interfaces, IEEE 1149.1 JTAG boundary scan, 25 MHz clock output, and energy detection mode. Fabricated in 0.18 um CMOS at 3.3 V, it consumes less than 270 mW typical. The integrated adaptive equalizer and baseline wander compensation ensure error-free operation up to 150 meters of CAT5 cable.

Working Principle: DP83848IVVX Working Principle

The DP83848IVVX implements the complete Ethernet physical layer between the MAC (Media Access Controller) and the magnetics/RJ45 connector. On the transmit path, the MAC transfers data to the PHY via the MII (4-bit nibble at 25 MHz for 100 Mbps or 2.5 MHz for 10 Mbps) or RMII (2-bit at 50 MHz) interface. The PHY encodes the data using 4B/5B coding (100BASE-TX) or Manchester encoding (10BASE-T), scrambles it, and drives it through the internal MLT-3 (100 Mbps) or Manchester (10 Mbps) line encoder onto the differential transmit pair (TX+/-) via the magnetics. On the receive path, the differential signal from the magnetics (RX+/-) is amplified by the low-noise receiver, equalized by the adaptive equalizer (compensating for cable loss), decoded, and presented to the MAC via the MII/RMII interface. Auto-negotiation automatically selects the highest common speed and duplex mode between the local and link partner. Auto-MDIX detects the cable type (straight or crossover) and internally swaps the TX and RX pairs as needed, eliminating crossover cable requirements. The 10/100 Mbps Packet BIST (Built-In Self Test) enables manufacturing verification without external traffic generators.

Pin Description: DP83848IVVX Pin Definition and Functions
Pin Name Description
1-4 TXD[3:0] MII transmit data from MAC (4-bit nibble)
5 TX_EN MII transmit enable
6 TX_CLK MII transmit clock (25 MHz / 2.5 MHz)
7 TX_ER MII transmit error indication
8-11 RXD[3:0] MII receive data to MAC
12 RX_DV MII receive data valid
13 RX_CLK MII receive clock
14 RX_ER MII receive error indication
15 CRS Carrier sense; active during receive or transmit
16 COL Collision detect; active during simultaneous TX/RX
17 MDC Management data clock (up to 25 MHz from MAC)
18 MDIO Management data I/O; bidirectional serial
19 INTR Interrupt output; active low, programmable mask
20-22 LED[2:0] Programmable LED outputs (link, speed, activity)
23 X1 25 MHz crystal oscillator input or external clock
24 X2 Crystal oscillator output (leave NC with external clock)
25-26 PMD-TX+/PMD-TX- 100BASE-TX transmit pair to magnetics
27-28 PMD-RX+/PMD-RX- 100BASE-TX receive pair from magnetics
29-44 VDD/GND Power (3.3 V) and ground; multiple pins for clean supply
45 JTAG_TCK JTAG test clock
46 JTAG_TMS JTAG test mode select
47 JTAG_TDI JTAG test data input
48 JTAG_TDO JTAG test data output
Application Scenarios: In which products and applications is DP83848IVVX used
  • Industrial Ethernet: 10/100 Mbps Ethernet connectivity for PLCs, motor drives, and factory automation controllers
  • Embedded Networking: Adding Ethernet capability to MCU- and FPGA-based embedded systems via MII or RMII
  • Medical Devices: Isolated Ethernet communication for patient monitoring and diagnostic equipment
  • Smart Grid Meters: IEEE 802.3-compliant communication for smart meters and energy management systems
  • Automotive Telematics: In-vehicle Ethernet PHY for ECU communication and diagnostics
Alternative Models: What chips are recommended as replacements for DP83848IVVX
Model Manufacturer Speed Interface Auto-MDIX Package
DP83848CVVX Texas Instruments 10/100 MII/RMII/SNI Yes LQFP-48
LAN8720A Microchip 10/100 RMII Yes QFN-24
KSZ8041NL Microchip 10/100 MII/RMII Yes QFN-32
RTL8201CP Realtek 10/100 MII/RMII Yes QFP-48
ENC28J60 Microchip 10 SPI No DIP/SOIC-28

DP83848IVVX is a 10/100Mbps Ethernet PHY from TI in LQFP-48 (7x7mm) with MII/RMII/SNI interface and Auto-MDIX. The DP83848CVVX is the commercial-grade version (0-70C vs -40-85C). DP83848I provides the industrial temperature range. For newer designs, DP83822IRHBR offers 10/100Mbps in smaller VQFN-32. KSZ8041NL from Microchip provides a pin-compatible alternative with RMII-only interface in QFN-24. For Gigabit, DP83867IR provides 10/100/1000Mbps in VQFN-48.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1