Opens in a new tab

DRV2605LDGSR

Haptic driver, ERM/LRA, 123 waveforms, I2C, VSSOP-10, auto-resonance, closed-loop

9849

Effective Inventory

Image for reference only

Manufacturer Part:

DRV2605LDGSR

Package:

VSSOP-10 (3.00 x 3.00 x 0.95 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DRV2605LDGSR from Texas Instruments is a haptic driver for ERM and LRA actuators with built-in haptic waveform library in a VSSOP-10 package. It provides closed-loop feedback and I2C control for advanced haptic effects in portable electronics.

Key Specifications

Actuator Type ERM (eccentric rotating mass) and LRA (linear resonant actuator)
Supply Voltage 2.0 V to 5.2 V
Output Current 200 mA (max)
Interface I2C (up to 400kHz)
Waveforms 123 built-in haptic effects
Operating Temperature -40C to +85C

Features

  • Supports both ERM and LRA haptic actuators
  • 123 pre-programmed haptic waveform library effects
  • Closed-loop auto-resonance tracking for LRA actuators
  • Real-time playback with I2C trigger commands
  • Automatic overdrive and braking for crisp haptic response
  • Ultra-low 1.8uA standby current for battery-powered devices

Applications

  • Smartphone and tablet haptic feedback
  • Wearable device vibration effects
  • Game controller and joystick haptics
  • Industrial equipment tactile alerts
Product Introduction: DRV2605LDGSR Product Introduction

The DRV2605LDGSR from Texas Instruments is a highly integrated haptic driver designed for both ERM (eccentric rotating mass) and LRA (linear resonant actuator) vibration motors in a VSSOP-10 package. The device features a built-in haptic waveform library with 123 pre-programmed effects including clicks, bumps, dips, pops, and complex patterns, eliminating the need for custom waveform development. For LRA actuators, the DRV2605L implements closed-loop auto-resonance tracking that continuously monitors the actuator’s back-EMF to maintain optimal driving frequency, ensuring maximum vibration amplitude even as the resonant frequency shifts with temperature and aging. The automatic overdrive feature applies higher voltage during actuator startup for faster response, while the active braking feature quickly stops vibration for crisp tactile feedback. I2C interface (up to 400kHz) provides simple register-based control with real-time playback capability. The device operates from 2.0V to 5.2V and consumes only 1.8uA in standby mode, making it ideal for battery-powered portable devices.

Working Principle: DRV2605LDGSR Working Principle

The DRV2605LDGSR drives haptic actuators using pre-programmed waveforms with closed-loop feedback. (1) Waveform Library: 123 haptic effects are stored in on-chip ROM. Each effect defines the drive waveform amplitude envelope over time. The I2C interface selects and triggers playback of any library effect. (2) ERM Mode: For eccentric rotating mass motors, the DRV2605L drives a PWM signal through an H-bridge output stage. Automatic overdrive applies higher PWM duty cycle during motor startup to reduce response time. Active braking reverses the H-bridge polarity to quickly decelerate the motor, producing crisp haptic effects. (3) LRA Mode: For linear resonant actuators, the device drives a sinusoidal-like AC signal at the actuator’s resonant frequency. Auto-resonance tracking monitors the back-EMF of the LRA during the off portion of each drive cycle. The DSP calculates the phase difference between the drive signal and the back-EMF, adjusting the drive frequency to maintain resonance. (4) Closed Loop: For both actuator types, the back-EMF feedback enables detection of actuator faults (open/short) and ensures consistent haptic performance across manufacturing variations and operating conditions.

Pin Description: DRV2605LDGSR Pin Definition and Functions
Pin Name Type Function
1 EN Input Enable (active high)
2 SCL Input I2C clock
3 SDA I/O I2C data
4 IN/TRIG Input Trigger input (hardware playback)
5 GND Ground Ground
6 OUT+ Output Haptic driver output positive
7 OUT- Output Haptic driver output negative
8 VDD Power Supply (2.0-5.2V)
9 REG Output Internal regulator bypass (1.8V)
10 FB Input Back-EMF feedback from actuator
Application Scenarios: In which products and applications is DRV2605LDGSR used
  • Smartphone and tablet haptic feedback with 123 built-in effects
  • Wearable device vibration effects with LRA auto-resonance tracking
  • Game controller and joystick haptics with overdrive and braking
  • Industrial equipment tactile alerts with I2C trigger control
Alternative Models: What chips are recommended as replacements for DRV2605LDGSR
Manufacturer Part Number Package Notes
TI DRV2605LYFPR DSBGA-9 Smaller package option
TI DRV2604L VSSOP-10 No waveform library, RAM only
TI DRV2624 WQFN-9 Next-gen, ERM/LRA
DIODES DA3802 QFN-9 ERM/LRA driver, basic

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1