Opens in a new tab

DRV8301DCAR

3-phase motor gate driver, 1.7A/2.3A, 6-60V, integrated buck + CSA, HTSSOP-28

9161

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8301DCAR

Package:

HTSSOP-28 PowerPAD (9.7 x 4.4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DRV8301DCAR from Texas Instruments is a three-phase motor gate driver with integrated buck regulator and dual current sense amplifiers in an HTSSOP-28 PowerPAD package. Providing 1.7A/2.3A gate drive current from a 6-60V supply, it is a complete motor drive front-end for BLDC and PMSM motors.

Key Specifications

Gate Drive Current 1.7A source / 2.3A sink
Supply Voltage 6V – 60V
Buck Regulator Output 5V or 3.3V @1.5A
Current Sense Amplifiers 2, gain 10/20/40/80 V/V
PWM Mode 6 independent or 3 PWM inputs
Protection OCP, OT, UVLO, FAULT reporting
Operating Temperature -40°C to +125°C
Package HTSSOP-28 PowerPAD (DCAR suffix)

Features

  • Integrated three-phase gate driver for 6 N-channel MOSFETs
  • Built-in buck regulator (5V/3.3V, 1.5A) powers MCU and logic
  • Dual current sense amplifiers with 4 programmable gain settings
  • 6V-60V supply range for automotive and industrial motor systems
  • SPI interface for configuration and fault reporting
  • Comprehensive protection: OCP, OTP, UVLO, and fault indicator

Applications

  • BLDC and PMSM motor drive systems
  • Robotics and drone motor controllers
  • Automotive electric power steering and pumps
  • Industrial servo and CNC motor drives
Product Introduction: DRV8301DCAR Product Introduction

The DRV8301DCAR from Texas Instruments is a highly integrated three-phase motor gate driver designed for BLDC and PMSM motor drive applications. It combines a 1.7A/2.3A gate driver for six external N-channel MOSFETs, a built-in 1.5A buck regulator for MCU power, and two current sense amplifiers with programmable gain (10-80V/V). The 6V-60V supply range covers automotive and industrial motor systems, while the SPI interface provides full configuration control and detailed fault reporting. The HTSSOP-28 PowerPAD package ensures efficient thermal management.

Working Principle: DRV8301DCAR Working Principle

The DRV8301DCAR consists of three main subsystems: (1) Gate Driver — three half-bridge gate drivers with adaptive dead-time and charge-pump boosted gate drive for 100% duty cycle operation. Each driver provides 1.7A source / 2.3A sink peak current to rapidly charge/discharge external MOSFET gates. (2) Buck Regulator — a synchronous step-down converter that generates 5V or 3.3V at 1.5A from the motor supply voltage, powering the MCU and external logic without a separate voltage regulator. (3) Current Sense Amplifiers — two differential amplifiers that measure the voltage across external low-side shunt resistors, with programmable gains of 10, 20, 40, or 80 V/V. The SPI interface allows reading fault registers and adjusting gate drive strength, dead time, and CSA gain.

Pin Description: DRV8301DCAR Pin Definition and Functions
Pin Name Description
1-6 GH_A/B/C High-side gate drive outputs (A, B, C phases)
7-12 SH_A/B/C Phase node (high-side source / low-side drain)
13-18 GL_A/B/C Low-side gate drive outputs (A, B, C phases)
19 VDD Buck regulator output (5V or 3.3V)
20 SO1/SO2 Current sense amplifier outputs
21 SPI SPI interface (SCLK, SDI, SDO, nCS)
22 PWM 6x PWM or 3x PWM inputs
23 EN_GATE Gate driver enable
24 nFAULT Fault indicator output
25-28 PWR PVDD, BST, EN_BUCK, COMP
Application Scenarios: In which products and applications is DRV8301DCAR used
  • BLDC and PMSM motor drive for robotics and drones
  • Automotive EPS, water pump, and cooling fan motor controllers
  • Industrial servo motor and CNC drive systems
  • E-bike and electric scooter motor controllers
Alternative Models: What chips are recommended as replacements for DRV8301DCAR
Model Manufacturer Current Vin Buck
DRV8302 TI 1.7A/2.3A 6-60V Yes
DRV8323 TI 1A/2A 6-60V No
MC33937 NXP 1A 5-28V No
A4935 Allegro 0.55A 6-50V No

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NCP302045MNTWG

45V 5A programmable overcurrent protection switch, 50mΩ Ron, -60V reverse polarity, DFN-8

Brand: ON

Package: DFN-8 (3x3mm, 0.65mm pitch)

IN STOCK: 4759pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1