Opens in a new tab

DRV8711DCPR

52V stepper gate driver, 1/256 microstep, SPI, stall detect, ext N-FET, HTSSOP-38

2150

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8711DCPR

Package:

HTSSOP-38 PowerPAD (9.7 x 6.4 x 1.2mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DRV8711DCPR is a 52V bipolar stepper motor gate driver from Texas Instruments with 1/256 microstepping, SPI interface, stall detection, and external N-channel MOSFET drive in a 38-pin HTSSOP package.

Key Specifications

Supply Voltage (VM) 8V to 52V
Absolute Max VM 60V
Microstepping Up to 1/256 step (built-in indexer)
Control Interface STEP/DIR or PWM, plus SPI configuration
Output Configuration 4 half-bridge gate drivers (external N-FETs)
GATE Drive Current Programmable source/sink via SPI
Sleep Current 65µA typical
Stall Detection Yes (BEMF output)
Internal 5V Regulator Yes (10mA output for external loads)
Operating Temperature -40°C to +85°C
Package HTSSOP-38 (PowerPAD)

Features

  • Drives external N-channel MOSFETs for scalable current
  • Built-in 1/256-step microstepping indexer for ultra-smooth motion
  • SPI interface for torque, step mode, decay, and stall configuration
  • Auto-mixed decay mode for optimal current regulation
  • Stall detection with BEMF output for sensorless homing
  • Overcurrent, overtemperature, and undervoltage lockout protection
  • FAULTn pin with per-fault SPI status bits
  • Internal 5V regulator eliminates external LDO for logic supply

Applications

  • 3D printers and CNC machines
  • Industrial automation stepper drives
  • Robotics and positioning systems
  • Textile and packaging machinery
  • Automated test equipment
Product Introduction: DRV8711DCPR Product Introduction

The DRV8711DCPR from Texas Instruments is a stepper motor gate driver IC that drives external N-channel MOSFETs for bipolar stepper motors or two brushed DC motors. It integrates a 1/256-step microstepping indexer for ultra-smooth motion profiles. The SPI serial interface configures output current (torque), step mode, decay mode, and stall detection parameters. Auto-mixed decay mode dynamically adjusts the current decay strategy for optimal performance across speed ranges. The stall detection feature uses back-EMF sensing to detect motor stall without external sensors, enabling sensorless homing. The internal 5V regulator can supply up to 10mA for external logic. Protection features include overcurrent protection (OCP), overtemperature shutdown (OTS), and undervoltage lockout (UVLO), with a dedicated FAULTn pin and individual fault status bits accessible via SPI.

Working Principle: DRV8711DCPR Working Principle

The DRV8711DCPR operates as a microstepping chopper driver for external N-channel MOSFETs. The STEP/DIR interface accepts step pulses from the MCU; the internal indexer converts each step into the appropriate phase current targets for the two motor windings based on the configured microstep resolution (full step to 1/256). The SPI interface sets the target current via an 8-bit torque DAC and the current sense amplifier gain (5, 10, 20, or 40 V/V) for external sense resistors. The PWM chopper regulates the winding current: when the current through the sense resistor exceeds the target, the driver turns off the high-side MOSFET for a programmable off-time (0.5µs to 128µs), allowing the current to decay through the low-side MOSFET and body diode. The decay mode (fast, slow, or auto-mixed) determines whether both low-side MOSFETs are on (slow decay) or only one (fast decay) during the off-time. Auto-mixed decay uses slow decay when the current is increasing and fast decay when decreasing, minimizing distortion. Stall detection monitors the back-EMF of the motor windings; when the motor stalls, the BEMF drops to near zero, which is detected and reported on the STALLn output and via SPI status bits. The overcurrent protection monitors the voltage across each external MOSFET; if the drop exceeds the programmable threshold (250mV to 1000mV), all outputs are disabled and the fault is latched.

Pin Description: DRV8711DCPR Pin Definition and Functions
Pin Group Count Function Description
VM 1 Power Motor supply (8-52V)
VCC/AGND 2 Power Logic supply and analog ground
GND/DGND 2 Power Power and digital ground
STEP/DIR 2 Input Step pulse and direction control
SPI (SCLK/SDATI/SDATO/SCS) 4 Interface SPI configuration interface
GATE A/B (xAH/xAL/xBH/xBL) 8 Output Gate drive outputs for 4 external N-FETs
SENSE A/B 2 Input Current sense inputs from external resistors
FAULTn/STALLn 2 Output Fault and stall status indicators
SLEEPn/RESETn 2 Input Sleep and reset control
V5/VCP/CAPH/CAPL 4 Power 5V regulator, charge pump, bootstrap caps
BEMF/AVDD/DVDD 3 Misc Back-EMF output, reference voltages
Application Scenarios: In which products and applications is DRV8711DCPR used
  • 3D Printers: 1/256 microstepping produces near-silent stepper operation; SPI tunes torque for different print speeds
  • CNC Machines: External MOSFETs scale to 10A+ per phase for high-torque NEMA 34 steppers; stall detection for homing
  • Sensorless Homing: BEMF stall detection eliminates limit switches, reducing wiring and mechanical complexity
  • Industrial Drives: Auto-mixed decay minimizes current distortion across the full speed range without manual tuning
  • Robotics: SPI interface enables real-time torque adjustment for compliance and force control algorithms
Alternative Models: What chips are recommended as replacements for DRV8711DCPR
Model Manufacturer Key Difference Package Specs
DRV8711DCPRHT TI Tape & reel version of same package – –
DRV8825PWPR TI Integrated 2.5A FETs, 1/32 microstep, HTSSOP-28 – –
TMC5160-TA Trinamic StealthChop, 1/256 microstep, ext FET, QFN-48 – –
A4989 Allegro Dual full-bridge gate driver, 50V, TSSOP-28 – –
THB6128 Toshiba/Melexis 2A integrated, 1/128 microstep – –

DRV8711DCPR is a 52V stepper motor gate driver from TI in HTSSOP-38 with 1/256 microstepping. The DRV8711EVM evaluation module enables rapid prototyping. The TMC5130 from Trinamic offers integrated MOSFETs with 1/256 stepping and sensorless homing in QFN-48. The DRV8825 provides integrated 2.5A drivers in HTSSOP-28 for simpler designs. The L6470 from ST provides 7A gate driver with 1/128 microstepping. The A5995 from Allegro offers dual H-bridge gate driver in TSSOP-28. For brushed DC, DRV8701 provides single H-bridge gate driver.

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1