Opens in a new tab

Home » Gate Driver ICs » DRV8824PWPR

DRV8824PWPR

Dual H-bridge 2.5A, 8.2-45V, 1/16 microstep stepper driver, OCP, HTSSOP-28

5640

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8824PWPR

Package:

HTSSOP-28 with PowerPAD (9.70 x 4.40 x 1.00 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DRV8824PWPR from Texas Instruments is a dual H-bridge motor driver for one bipolar stepper motor or two DC motors. With 2.5A per bridge, 8.2-45V supply, and 1/16 microstepping, it provides overcurrent and thermal protection in a 28-pin HTSSOP package.

Key Specifications

Motor Type Bipolar stepper (1) or DC motor (2)
Bridge Configuration Dual H-bridge
Output Current 2.5 A per bridge (max)
Supply Voltage 8.2 V to 45 V
Microstepping Up to 1/16 step
RDS(on) per FET 0.35 Ohm (HS + LS = 0.7 Ohm total)
Control Interface STEP/DIR, 3-bit MSTEP
Protection OCP, thermal shutdown, UVLO, fault output
Sleep Mode Yes (nSLEEP pin)
Operating Temperature -40°C to +125°C
Package HTSSOP-28 with PowerPAD

Features

  • Dual H-bridge driver at 2.5A/bridge with 8.2-45V supply for stepper or DC motors
  • 1/16 microstepping for smooth, low-vibration stepper motor operation

Applications

  • Bipolar stepper motor drive in 3D printers and CNC machines
  • Industrial automation and robotics motor control
Product Introduction: DRV8824PWPR Product Introduction

The DRV8824PWPR from Texas Instruments is a dual H-bridge motor driver capable of driving one bipolar stepper motor or two DC motors. Each H-bridge can deliver up to 2.5A of output current from an 8.2V to 45V supply. The device supports up to 1/16 microstepping for smooth, low-vibration stepper motor operation. The internal MOSFETs have 0.35 Ohm RDS(on) per FET (HS+LS = 0.7 Ohm total), providing efficient motor drive. A simple STEP/DIR interface with 3-bit microstep resolution select (M0, M1, M2) allows easy microcontroller control. Built-in protection includes overcurrent protection (OCP) with auto-retry, thermal shutdown, undervoltage lockout (UVLO), and a fault output pin (nFAULT). The nSLEEP pin reduces supply current to less than 50uA in sleep mode. The HTSSOP-28 package with exposed PowerPAD provides excellent thermal performance for continuous motor operation.

Working Principle: DRV8824PWPR Working Principle

The DRV8824PWPR uses two independent H-bridge power stages for motor drive. (1) H-Bridge: Each bridge consists of four N-channel MOSFETs in an H configuration. By controlling which diagonal pair is turned on, current flows through the motor winding in either direction. PWM chopping regulates the winding current to the desired level. (2) Microstepping: The STEP pin advances the internal indexer by one microstep. The microstep size is set by M0/M1/M2 pins: full, 1/2, 1/4, 1/8, or 1/16 step. The indexer generates sine/cosine current references for the two bridges, producing smooth current waveforms at each microstep. (3) Current Regulation: An internal sense resistor or external sense resistor monitors the winding current. When the current exceeds the set threshold, the bridge enters a slow or mixed decay mode until the next PWM cycle. (4) Protection: OCP triggers when the current exceeds approximately 3.5A. Thermal shutdown disables both bridges when the die temperature exceeds 150C. The nFAULT pin is driven low during any fault condition.

Pin Description: DRV8824PWPR Pin Definition and Functions
Pin Name Function
1-2 AOUT1/AOUT2 Bridge A outputs (motor winding A)
3 BOUT1 Bridge B output 1
4 BOUT2 Bridge B output 2 (motor winding B)
5 nSLEEP Sleep mode (high=on, low=sleep)
6 STEP Step input (rising edge advances)
7 DIR Direction input
8-10 M0/M1/M2 Microstep resolution select
11 nFAULT Fault output (active low, open drain)
12-15 VDD/GND Logic supply and ground
Application Scenarios: In which products and applications is DRV8824PWPR used
  • Bipolar stepper motor drive at 2.5A with 1/16 microstep in 3D printers
  • Industrial automation stepper and DC motor control at 8-45V
  • CNC and robotics motor drive with overcurrent and thermal protection
Alternative Models: What chips are recommended as replacements for DRV8824PWPR
Manufacturer Part Number Package Notes
TI DRV8825PWPR HTSSOP-28 Pin-compatible, 1.5A, lower current
TI DRV8834PWPR HTSSOP-24 11V max, lower voltage
Allegro A4988SETTR-T QFN-28 2A, 1/16 step, similar

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1