Opens in a new tab

DS1233Z-10+

5V EconoReset supervisor, 4.375V threshold, 350ms timeout, SOT-223

11667

Effective Inventory

Image for reference only

Manufacturer Part:

DS1233Z-10+

Package:

SOT-223 (6.5 x 3.5 x 1.8 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The DS1233Z-10+ from Analog Devices (formerly Maxim) is a 5V EconoReset microprocessor supervisor with a 4.375V threshold in a SOT-223 package. It monitors the 5V power supply and provides an active-low reset output with 350ms timeout, plus pushbutton reset debouncing.

Key Specifications

Function 5V Microprocessor Supervisor
Threshold Voltage 4.375V (10% tolerance)
Threshold Range 4.25V to 4.49V
Reset Output Active Low, Open Drain
Reset Timeout 350 ms (typ)
Supply Current 50 uA (typ)
Supply Voltage Range 1.2V to 5.5V
Pushbutton Reset Yes (debounced)
Operating Temperature -40 to +85 C
Package SOT-223-3

Features

  • Monitors 5V power supply with 10% tolerance
  • 4.375V precision trip threshold
  • Active-low open-drain reset output
  • 350ms reset timeout after VCC returns
  • Pushbutton reset input with debounce
  • Internal 5kOhm pull-up resistor
  • Precision temperature-compensated voltage reference
  • Low 50uA supply current
  • No external components required
  • SOT-223 surface-mount package

Applications

  • 5V microprocessor reset supervision
  • Pushbutton reset debounce
  • Power-fail detection in embedded systems
  • Industrial control power monitoring
Product Introduction: DS1233Z-10+ Product Introduction

The DS1233Z-10+ from Analog Devices is a 5V EconoReset microprocessor supervisor that monitors two vital conditions: power supply voltage and pushbutton override. The Z suffix denotes the SOT-223 surface-mount package, -10 indicates 10% trip threshold tolerance (4.375V), and + denotes Pb-free. When VCC drops below 4.375V, the active-low open-drain reset output activates. When VCC returns above threshold, the reset remains active for approximately 350ms to allow the power supply and processor to stabilize. The pushbutton input is debounced internally, generating a clean 350ms reset pulse upon button release. The internal 5kOhm pull-up resistor simplifies circuit design by eliminating the need for an external pull-up.

Working Principle: DS1233Z-10+ Working Principle

The DS1233Z-10+ operates through three subsystems: (1) Voltage Monitoring: A precision temperature-compensated voltage reference and comparator circuit continuously monitors VCC. When VCC falls below the 4.375V threshold (4.25V to 4.49V window), an internal power-fail signal is generated, forcing the reset output to the active-low state. The open-drain output can be wire-ORed with other reset sources. (2) Reset Timeout: When VCC returns above the threshold, an internal oscillator starts a 350ms (typical) timeout period. During this period, the reset output remains active, giving the power supply time to stabilize and the microprocessor time to complete its internal initialization. After the timeout, the reset output is released. (3) Pushbutton Reset: The PB input has an internal debounce circuit. When the pushbutton is pressed (PB pulled low), the reset output activates. When the button is released, the debounce circuit waits for the switch to settle, then generates a 350ms reset pulse. The internal 5kOhm pull-up resistor keeps PB high when the button is not pressed.

Pin Description: DS1233Z-10+ Pin Definition and Functions
Pin Name Type Description
1 GND Power Ground
2 RST Output Reset output (active low, open-drain with 5kOhm pull-up)
3 PB Input Pushbutton reset input (active low, internal pull-up)
Tab VCC Power Supply voltage (monitored)
Application Scenarios: In which products and applications is DS1233Z-10+ used
  • 5V microprocessor system power-on reset with 350ms delay for supply stabilization
  • Embedded system pushbutton reset with internal debounce eliminating external RC filter
  • Industrial controller brownout detection with 4.375V threshold protecting against data corruption
  • Multi-board system reset coordination using open-drain wire-OR reset output
Alternative Models: What chips are recommended as replacements for DS1233Z-10+
Model Manufacturer Threshold Timeout Notes
DS1233Z-5+ ADI 4.625V 350ms 5% tolerance version
DS1233Z-15+ ADI 4.125V 350ms 15% tolerance version
MAX809TTRG onsemi 4.38V 140ms 3-pin SOT-23
TLC7705IDR TI 4.55V 200ms Adjustable timeout

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1