Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » DS125DF1610FB/NOPB

DS125DF1610FB/NOPB

16-ch 12.5Gbps retimer, adaptive CTLE/DFE/CDR, 4×4 crossbar/quad, FCBGA-196

5772

Effective Inventory

Image for reference only

Manufacturer Part:

DS125DF1610FB/NOPB

Package:

196-FCBGA (15.0 × 15.0 × 1.7 mm, 1.0mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DS125DF1610FB/NOPB is a 9.8 to 12.5 Gbps 16-channel retimer from Texas Instruments, packaged in a 196-pin FCBGA (ABB) 15 × 15 mm package. It features fully adaptive CTLE, self-tuning DFE, and CDR on each channel, along with an integrated 4×4 analog cross-point switch per quad. The device includes on-chip eye-monitor and PRBS generator/checker for diagnostic capabilities, supporting protocols including 10G-SR/LR, 40G-SR4/LR4, CPRI, and Infiniband.

Key Specifications

Function 16-Channel Retimer (9.8-12.5 Gbps)
Channels 16
Data Rate 9.8 to 12.5 Gbps (and /2, /4, /8 sub-rates)
Signal Conditioning Adaptive CTLE + 5-tap DFE + CDR
Cross-Point Switch 4×4 analog cross-point per quad
Transmit FIR Programmable FIR filter
BER < 1×10^-15
Diagnostics On-chip eye monitor, PRBS gen/check
Supply 3.3V / 2.5V / 1.5V
Package 196-FCBGA (15 × 15 mm, 1mm pitch)
Operating Temperature -40°C to +85°C

Features

  • 16 independent retimer channels with fully adaptive CTLE and DFE
  • Integrated 4×4 analog cross-point switch per quad for flexible signal routing
  • On-chip eye-monitor for non-disruptive mission-mode diagnostics
  • Built-in PRBS generator/checker for BER verification
  • Programmable transmit FIR filter for pre-emphasis and de-emphasis
  • JTAG boundary scan for manufacturing test

Applications

  • 10G-SR/LR and 40G-SR4/LR4 optical module retiming
  • CPRI and OBSAI front-haul link signal conditioning
  • Infiniband DDR/QDR backplane signal integrity
  • Data center spine-leaf switch interconnect retiming
  • High-density server rack cable extension
Product Introduction: DS125DF1610FB/NOPB Product Introduction

The DS125DF1610 is a 16-channel retimer operating from 9.8 to 12.5 Gbps, designed to restore signal integrity in high-speed serial links degraded by channel losses, crosstalk, and jitter. Each channel features a fully adaptive continuous-time linear equalizer (CTLE), a self-tuning decision feedback equalizer (DFE), and a clock and data recovery (CDR) circuit that re-times the incoming data with a clean recovered clock. The device is organized as four quads of four channels each, with each quad incorporating a 4×4 analog cross-point switch for flexible signal routing between inputs and outputs. The on-chip eye-monitor allows non-disruptive observation of the equalized signal quality during normal operation, while the built-in PRBS generator/checker enables BER testing without external equipment.

Working Principle: DS125DF1610FB/NOPB Working Principle

The DS125DF1610 receives degraded high-speed serial data and restores its signal integrity through a multi-stage signal conditioning pipeline. The input CTLE provides programmable high-frequency boost to compensate for channel loss, with the adaptive algorithm continuously adjusting the equalization to track changing channel conditions. The equalized signal feeds the DFE, which uses feedback from previously decided bits to cancel post-cursor intersymbol interference (ISI) that the linear CTLE cannot fully remove. The CDR extracts a recovered clock from the equalized data using a bang-bang phase detector and a low-jitter VCO, then re-times the data with this clean clock to produce a low-jitter output. The transmit FIR filter provides programmable pre-emphasis and de-emphasis to pre-compensate for downstream channel losses. The cross-point switch allows any of the four inputs in a quad to be routed to any of the four outputs, enabling flexible network topology configurations.

Pin Description: DS125DF1610FB/NOPB Pin Definition and Functions
Pin Group Name Type Function
A1-A8 CH0-CH3 IN/OUT I/O Quad 0 channel inputs/outputs (CML)
B1-B8 CH4-CH7 IN/OUT I/O Quad 1 channel inputs/outputs (CML)
C1-C8 CH8-CH11 IN/OUT I/O Quad 2 channel inputs/outputs (CML)
D1-D8 CH12-CH15 IN/OUT I/O Quad 3 channel inputs/outputs (CML)
E1-E3 SCL/SDA/INT_N I/O SMBus/I2C control interface
E4 RESET_N Input Device reset (active low)
F1-F4 VDD_3.3/VDD_2.5/VDD_1.5 Power Power supply pins (3.3V, 2.5V, 1.5V)
G1-G8 GND Power Ground
H1-H4 TCK/TMS/TDI/TDO I/O JTAG test access port
Others NC/RESERVED — No-connect or reserved pins
Application Scenarios: In which products and applications is DS125DF1610FB/NOPB used
  • 40G-SR4/LR4 optical module signal retiming in data center leaf-spine architecture
  • CPRI rate-6/7/8 front-haul retiming in 5G base station DU-RU links
  • Infiniband EDR (25.8G) 2-lane retiming in HPC clusters
  • Data center server rack 10G-KR backplane retiming for extended reach
  • Enterprise storage 12G SAS signal conditioning in JBOD enclosures
Alternative Models: What chips are recommended as replacements for DS125DF1610FB/NOPB
Manufacturer Part Number Package Notes
TI DS125DF410SQE/NOPB WQFN-48 4-channel retimer, same family
TI DS160PR410 WQFN-48 4-ch 25.8G retimer, PCIe Gen4
Renesas 5P49V6965 QFN-72 8-channel 12.5G retimer
Marvell 88X3310 BGA-324 KR retimer for 10G/40G Ethernet
MaxLinear XR52816 BGA-196 16-channel 12.5G retimer

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1