Opens in a new tab

DS18B20

1-Wire digital temperature sensor, -55 to +125C, +/-0.5C accuracy, TO-92

5427

Effective Inventory

Image for reference only

Manufacturer Part:

DS18B20

Package:

TO-92-3 / SOIC-8

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DS18B20 from onsemi (formerly Maxim Integrated) is a 1-Wire digital temperature sensor providing 9-bit to 12-bit Celsius temperature measurements over a -55C to +125C range. It communicates over a single data line (1-Wire protocol) and supports multiple sensors on the same bus. Packaged in TO-92, waterproof probe, or SOIC-8.

Key Specifications

Temperature Range -55C to +125C
Accuracy +/-0.5C (at -10C to +85C)
Resolution 9-bit to 12-bit (programmable)
Interface 1-Wire
Supply Voltage 3.0V to 5.5V
Supply Current 1mA (active), 1uA (standby)
Conversion Time 750ms (12-bit)
Package TO-92-3 / SOIC-8

Features

  • 1-Wire interface requires only one data line (plus ground)
  • No external components required
  • Parasitic power mode eliminates need for separate supply
  • Unique 64-bit serial code enables multi-sensor bus
  • Programmable resolution: 9 to 12 bits
  • Alarm functions with user-defined thresholds

Applications

  • Industrial temperature monitoring
  • HVAC environmental control
  • Thermal management systems
  • Food safety and cold chain monitoring
Product Introduction: DS18B20 Product Introduction

The DS18B20 is a 1-Wire digital temperature sensor from onsemi that provides 9-bit to 12-bit Celsius temperature measurements. It communicates over a single data line using the Dallas 1-Wire protocol, enabling multiple sensors to share the same bus. Each device has a unique 64-bit serial code stored in on-board ROM, allowing individual addressing. The sensor operates from 3.0V to 5.5V and supports parasitic power mode where the device derives power from the data line, eliminating the need for a local supply. Over the -10C to +85C range, accuracy is +/-0.5C with 12-bit resolution providing 0.0625C increments.

Working Principle: DS18B20 Working Principle

The DS18B20 uses a bandgap temperature-sensing circuit whose output is digitized by a delta-sigma ADC. Temperature data is stored as a 16-bit two’s complement number in the scratchpad memory. The 1-Wire protocol uses a time-slot based signaling scheme where the master initiates communication with a reset pulse and the sensor responds with a presence pulse. Read and write operations use precise timing windows within each time slot. In parasitic power mode, the device charges an internal capacitor from the data line during high periods to power itself during low periods. The resolution is programmable from 9 bits (93.75ms conversion) to 12 bits (750ms conversion).

Pin Description: DS18B20 Pin Definition and Functions
Pin Name Function
1 GND Ground
2 DQ 1-Wire data I/O
3 VDD Power supply (3.0-5.5V) or parasitic mode (connect to GND)
Application Scenarios: In which products and applications is DS18B20 used
  • Multi-zone temperature monitoring with dozens of sensors on a single 1-Wire bus
  • Industrial cold chain and food safety monitoring with +/-0.5C accuracy
  • HVAC environmental control systems with alarm threshold functions
  • Embedded thermal management in battery packs and power electronics
Alternative Models: What chips are recommended as replacements for DS18B20
Model Manufacturer Key Difference
DS18S20 onsemi 9-bit only, earlier version
DS1822 onsemi Economy version, +/-2C accuracy
LM35 TI Analog output, 10mV/C
TMP102 TI I2C interface, SOT-6

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1