Opens in a new tab

DSPIC33EP512GM710-I

16-bit dsPIC DSC, 70 MIPS, 512KB Flash, 52KB RAM, dual CAN, USB, 100-TQFP, Microchip dsPIC33EP512GM710-I

1500

Effective Inventory

Image for reference only

Manufacturer Part:

DSPIC33EP512GM710-I

Package:

100-Lead TQFP (14mm × 14mm), surface mount

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DSPIC33EP512GM710-I is a high-performance 16-bit digital signal controller (DSC) from Microchip Technology, combining the real-time control capabilities of a microcontroller with the mathematical processing power of a digital signal processor (DSP). Housed in a 100-pin TQFP package, this device features a 70 MIPS dsPIC DSC core with integrated DSP and enhanced on-chip peripherals, including 512 KB of Flash program memory, 52 KB of RAM, two CAN 2.0B controllers, high-speed PWM modules with up to 16 output channels, multiple 12-bit ADCs with up to 8.2 Msps throughput, and advanced analog peripherals including op amps and comparators. With 3.0V to 3.6V operation, extended temperature support, and an array of motor control and digital power peripherals, the DSPIC33EP512GM710-I is ideal for high-performance motor control, digital power conversion, automotive electronics, industrial automation, and renewable energy applications.

Key Specifications

Parameter Value
Manufacturer Microchip Technology Inc.
Part Number DSPIC33EP512GM710-I/PT (TQFP)
Product Type 16-Bit Digital Signal Controller (DSC)
Core Architecture dsPIC DSC (modified Harvard, 16-bit)
CPU Speed 70 MIPS (140 MHz maximum)
Program Memory (Flash) 512 KB (256K x 24-bit instructions)
Data Memory (RAM) 52 KB
DMA Channels 8 channels
Operating Voltage 3.0 V to 3.6 V
Digital I/O Pins Up to 83 (100-pin package)
12-bit ADC Up to 8.2 Msps, multiple SAR cores, up to 43 analog inputs
PWM Modules Up to 16 PWM output pairs (high-resolution, 8.3ns resolution)
Motor Control PWM Yes (8 pairs with fault inputs)
Op Amps / Comparators Integrated op amps + analog comparators
CAN Controllers 2 x CAN 2.0B (each with 32 buffers)
UART / SPI / I2C 4 UART, 4 SPI, 2 I2C
USB USB 2.0 OTG (full-speed)
Quadrature Encoder Interface Yes (QEI)
Input Capture / Output Compare 9 IC / 9 OC
Timers 9 x 16-bit (or 4 x 32-bit)
CRC Module Yes
Operating Temperature -40°C ~ +85°C (I suffix, industrial)
Package / Case 100-Lead TQFP (14mm × 14mm)
Mounting Type Surface Mount
RoHS RoHS Compliant
Product Status Active / In Production

Features

  • High-performance 16-bit dsPIC DSC core, 70 MIPS
  • Modified Harvard architecture with 24-bit instruction width
  • Integrated DSP engine with MAC, barrel shifter, bit reversal
  • 512 KB Flash program memory, 52 KB RAM
  • 8-channel DMA controller
  • Single-cycle 16×16 fractional/integer multiply
  • 40-bit accumulator with saturation and rounding
  • High-speed PWM: up to 16 outputs, 8.3ns resolution
  • Motor control PWM with dead-band, fault inputs
  • High-speed 12-bit ADC (up to 8.2 Msps)
  • Multiple SAR ADC cores for simultaneous sampling
  • Integrated operational amplifiers (op amps)
  • Analog comparators with DAC references
  • Dual CAN 2.0B controllers
  • USB 2.0 OTG (full-speed)
  • 4 UART, 4 SPI, 2 I2C communication ports
  • Quadrature encoder interface (QEI)
  • 9 input capture / 9 output compare modules
  • CRC generator module
  • Brown-out reset, power-on reset, WDT
  • Industrial temperature range: -40°C ~ +85°C
  • 100-pin TQFP package
  • RoHS compliant

Applications

  • Advanced motor control (ACIM, BLDC, PMSM, FOC)
  • Digital power supplies and SMPS
  • Automotive electronics (body, chassis, powertrain)
  • Industrial drives and inverters
  • Renewable energy (solar inverters, wind converters)
  • Uninterruptible power supplies (UPS)
  • Factory automation and robotics
  • CAN-based control networks
  • Medical devices and equipment
  • High-performance embedded control systems
Product Introduction: DSPIC33EP512GM710-I Product Introduction

The DSPIC33EP512GM710-I is a flagship 16-bit digital signal controller from Microchip’s dsPIC33E ‘GM’ family, designed for high-performance embedded applications that require both microcontroller-level real-time control and DSP-level mathematical computation. Built around a modified Harvard architecture with a 24-bit instruction word and separate program/data buses, the dsPIC core executes at up to 70 million instructions per second (MIPS) and features a hardware DSP engine supporting single-cycle 16×16 fractional/integer multiply-accumulate (MAC) operations, a 40-bit accumulator with saturation logic, barrel shifting, and bit-reversed addressing for FFT computation — all critical for digital signal processing algorithms typically used in motor control, digital power, and audio applications. With 512 KB of on-chip Flash program memory and 52 KB of data RAM, this device offers generous code and data space for complex applications. The memory is supported by an 8-channel DMA controller that offloads data movement between peripherals and memory without CPU intervention, maximizing system throughput. The peripheral set is rich and focused on motor control and digital power applications: up to 16 high-resolution PWM outputs with 8.3 nanosecond resolution and integrated dead-band generation, multiple 12-bit SAR ADC cores delivering up to 8.2 megasamples per second with up to 43 analog inputs, integrated operational amplifiers for current sensing and signal conditioning, and analog comparators for fast fault detection. Communications peripherals include dual CAN 2.0B controllers (each with 32 message buffers), USB 2.0 Full-Speed OTG, four UARTs, four SPI ports, and two I2C ports — making the device suitable for multi-protocol industrial and automotive networks. Additional features include quadrature encoder interfaces for position feedback, input capture and output compare modules, CRC hardware acceleration, and a full set of system supervision features (WDT, BOR, POR). Operating from 3.0V to 3.6V with industrial temperature range (-40°C to +85°C) and available in a 100-pin TQFP package, the DSPIC33EP512GM710-I is the ideal choice for demanding motor control, digital power supply, automotive, and industrial control applications.

Working Principle: DSPIC33EP512GM710-I Working Principle

The DSPIC33EP512GM710 is a digital signal controller that blends microcontroller and DSP functionality into a single core. At the heart of the device is the dsPIC CPU, which is a 16-bit modified Harvard architecture processor: instructions are 24 bits wide (stored in Flash program memory) while data paths are 16 bits wide (using separate RAM data memory), allowing the core to fetch an instruction and read/write data in the same clock cycle. The core includes a full DSP engine with a 17×17-bit multiplier that can perform single-cycle 16×16 fractional or integer multiplications, accumulating results into a 40-bit accumulator (with two accumulator registers for back-to-back MAC operations). The DSP unit also includes a 40-bit barrel shifter for efficient bit manipulation and scaling, plus dedicated support for bit-reversed addressing that simplifies FFT butterfly computations. The PWM modules use dedicated hardware timers and comparators to generate precisely timed pulse-width modulated signals, independent of the CPU — critical for motor control and power supply applications where jitter must be minimized. The multi-core ADC architecture allows simultaneous sampling of multiple analog channels, which is essential for multi-phase motor control where phase currents and voltages must be measured at the same instant. The integrated op amps can be configured as differential amplifiers for current shunt sensing, eliminating the need for external amplifiers in many designs. The DMA controller operates in parallel with the CPU, transferring data between peripherals and RAM without CPU intervention — for example, moving ADC results into a buffer or loading new duty cycle values into the PWM modules. This allows the CPU to focus on algorithm computation while data movement happens autonomously in the background. The overall architecture enables sophisticated control algorithms like Field-Oriented Control (FOC) for PMSM/BLDC motors, active power factor correction (PFC), and digital power conversion to run efficiently on a single chip, reducing system cost and component count compared to multi-chip MCU + DSP solutions.

Pin Description: DSPIC33EP512GM710-I Pin Definition and Functions

The DSPIC33EP512GM710-I is available in a 100-lead TQFP package. Major pin groups:

Pin Group Count Description
Power & Ground ~14 VDD, VSS, AVDD, AVSS (multiple pins)
Oscillator 2 OSC1/CLKI, OSC2/CLKO
Digital I/O Ports Up to 83 Ports RA through RG (shared with peripherals)
Analog Inputs Up to 43 AN0-AN42 (shared with digital pins)
PWM Outputs Up to 16 PWM1H/PWM1L through PWM8H/PWM8L
CAN Bus 4 C1RX, C1TX, C2RX, C2TX
USB 2 D+, D- (USB 2.0 FS OTG)
UART 8 4 UART ports (RX/TX each)
SPI multiple 4 SPI modules (SCK, SDI, SDO, SS)
I2C 4 2 I2C modules (SDA, SCL each)
QEI / Encoder 6 QEA, QEB, IND (2 channels)
Comparator / Op-Amp ~12 Op amp inputs/outputs, comparator inputs
Debug/Program 3 PGEC1, PGED1, MCLR

Note: Many pins have multiple multiplexed functions. Exact pin assignments depend on package variant and pin selection configuration. Refer to the official dsPIC33EP512GM710 datasheet and pinout diagrams for complete details.

Application Scenarios: In which products and applications is DSPIC33EP512GM710-I used
  • Advanced Motor Control: Used in high-performance field-oriented control (FOC) for PMSM and BLDC motors, AC induction motor drives, and servo controllers where the combination of high-resolution PWM, fast ADC, and DSP processing enables efficient, high-bandwidth motor control
  • Digital Power Supplies (SMPS): Deployed in high-efficiency switch-mode power supplies, DC-DC converters, and power factor correction (PFC) circuits, leveraging the high-speed PWM and DSP capabilities for digital control loop implementation
  • Automotive Electronics: Used in automotive body electronics, chassis control, and powertrain subsystems, with dual CAN controllers supporting CAN 2.0B communication in vehicle networks
  • Industrial Drives & Inverters: Found in variable frequency drives (VFDs), industrial inverters, and robotics controllers requiring precise motor control and robust industrial communication interfaces
  • Renewable Energy: Deployed in solar inverters (both string and micro-inverter), wind power converters, and energy storage systems where the DSP engine handles MPPT algorithms and grid-tie control
  • Uninterruptible Power Supplies (UPS): Used in online UPS systems for inverter control, battery management, and grid synchronization, leveraging the high-resolution PWM and analog peripherals
  • Factory Automation & Robotics: Found in PLC modules, motion controllers, and industrial robots where real-time control, high-speed communication (CAN, Ethernet via external PHY), and sensor signal processing are required
  • Medical Devices & Equipment: Used in medical instrumentation, infusion pumps, surgical tools, and diagnostic equipment where precision control, reliability, and signal processing capability are essential
Alternative Models: What chips are recommended as replacements for DSPIC33EP512GM710-I
Part Number Manufacturer Flash RAM Speed PWM / ADC
DSPIC33EP512GM710-I Microchip 512KB 52KB 70MIPS 16ch PWM, 8.2Msps ADC
DSPIC33EP256GM710-I Microchip 256KB 32KB 70MIPS 16ch PWM, 8.2Msps ADC
DSPIC33EP128GM710-I Microchip 128KB 16KB 70MIPS 16ch PWM, 8.2Msps ADC
DSPIC33EP512GM706-I Microchip 512KB 52KB 70MIPS 14ch PWM, 64-pin
STM32F303 ST 256KB 48KB 72MHz 17ch PWM, 5Msps ADC (Cortex-M4 + FPU)
TMS320F28069 TI 256KB 100KB 90MHz PWM, 12-bit ADC (C2000 MCU)

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1