Opens in a new tab

DSPIC33EV256GM106-I

5V 16-bit dsPIC DSC, 70MIPS, 256KB Flash, 16KB RAM, 14 PWM, CAN, 64-TQFP, Microchip dsPIC33EV256GM106-I

2900

Effective Inventory

Image for reference only

Manufacturer Part:

DSPIC33EV256GM106-I

Package:

64-Lead TQFP (12mm × 12mm), surface mount

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DSPIC33EV256GM106-I is a 5V-capable 16-bit digital signal controller from Microchip’s dsPIC33EV family, offering expanded peripheral set and I/O count in a 64-pin TQFP package. Featuring a 70 MIPS dsPIC DSC core with integrated DSP engine, 256 KB of Flash program memory, 16 KB of RAM, and 5V-tolerant I/Os, this device is designed for motor control and digital power applications requiring high noise immunity and direct 5V interfacing. The enhanced peripheral set includes high-resolution PWM with up to 14 outputs (7 pairs) at 2.1 ns resolution, a 12-bit ADC with up to 3.5 Msps throughput and 49 analog inputs, multiple integrated op amps and comparators, a CAN 2.0B controller, and additional communication and control peripherals. With its 5V operation, industrial temperature range, and larger pin count, the DSPIC33EV256GM106-I is ideal for multi-motor control systems, industrial drives, automotive electronics, and digital power applications requiring more I/O and peripherals than the 44-pin variants.

Key Specifications

Parameter Value
Manufacturer Microchip Technology Inc.
Part Number DSPIC33EV256GM106-I/PT
Product Type 16-Bit Digital Signal Controller (DSC) – 5V
Core Architecture dsPIC DSC (modified Harvard, 16-bit)
CPU Speed 70 MIPS (140 MHz maximum)
Program Memory (Flash) 256 KB (128K x 24-bit instructions)
Data Memory (RAM) 16 KB
DMA Channels 6 channels
Operating Voltage (I/O) 4.5 V to 5.5 V (5V tolerant I/O)
Core Voltage 3.3 V (internal regulator from 5V)
Digital I/O Pins Up to 53 (64-pin package)
12-bit ADC Channels Up to 49 analog inputs, up to 3.5 Msps
ADC Architecture SAR, multiple cores, simultaneous sampling
PWM Outputs Up to 14 PWM outputs (7 pairs), 2.1ns resolution
Motor Control PWM Yes (complementary pairs, dead-band, fault inputs)
Op Amps / Comparators 4 op amps + multiple analog comparators
CAN Controller 1 x CAN 2.0B (32 message buffers)
UART / SPI / I2C 3 UART, 2 SPI, 2 I2C
Quadrature Encoder Interface Yes (2 channels)
Input Capture / Output Compare 9 IC / 9 OC
Timers 9 x 16-bit (or 4 x 32-bit)
CRC Module Yes
Operating Temperature -40°C ~ +85°C (industrial)
Package / Case 64-Lead TQFP (12mm × 12mm)
Mounting Type Surface Mount
RoHS RoHS Compliant
Product Status Active / In Production

Features

  • High-performance 16-bit dsPIC DSC core, 70 MIPS
  • 5V operating voltage, high noise immunity
  • 5V tolerant I/O pins (direct 5V interfacing)
  • 256 KB Flash program memory, 16 KB RAM
  • 6-channel DMA controller
  • Integrated DSP engine (MAC, barrel shifter, bit reversal)
  • 40-bit accumulator with saturation and rounding
  • High-speed PWM: 14 outputs, 2.1ns resolution
  • Motor control PWM with dead-band and fault protection
  • 12-bit SAR ADC (up to 3.5 Msps, 49 channels)
  • Multiple ADC cores for simultaneous sampling
  • 4 integrated operational amplifiers
  • Multiple analog comparators with DAC references
  • CAN 2.0B controller (32 message buffers)
  • 3 UART, 2 SPI, 2 I2C communication ports
  • 2 Quadrature encoder interfaces (QEI)
  • 9 input capture / 9 output compare modules
  • CRC hardware acceleration
  • On-chip 3.3V regulator from 5V input
  • Brown-out reset, power-on reset, WDT
  • Industrial temperature range: -40°C ~ +85°C
  • 64-pin TQFP package
  • RoHS compliant

Applications

  • Multi-axis motor control systems
  • PMSM / BLDC / ACIM motor drives with FOC
  • Digital power supplies and DC-DC converters
  • Power factor correction (PFC)
  • Automotive electronics (5V systems)
  • Industrial drives and inverters
  • Robotics and motion control
  • CAN-based industrial networks
  • Renewable energy (micro-inverters)
  • High noise immunity embedded systems
Product Introduction: DSPIC33EV256GM106-I Product Introduction

The DSPIC33EV256GM106-I is a 64-pin variant of Microchip’s dsPIC33EV family of 5V-capable 16-bit digital signal controllers, designed for motor control and digital power applications that require more I/O pins, additional PWM channels, and a richer peripheral set than the 44-pin versions. The dsPIC33EV family is unique in its 5V operating capability: the I/O pins are 5V tolerant and the device can be powered directly from a 5V supply, providing superior noise immunity in industrial and automotive environments while the core logic runs at 3.3V via an on-chip regulator. This 64-pin variant expands significantly on the 44-pin version with up to 53 general-purpose I/O pins, 14 high-resolution PWM outputs (7 complementary pairs), 49 analog input channels, four integrated operational amplifiers, two quadrature encoder interfaces, and additional communication peripherals including three UARTs and two I2C ports. The dsPIC core achieves 70 MIPS performance and integrates a full DSP engine with single-cycle 16×16 multiply-accumulate capability, a 40-bit accumulator, barrel shifter, and bit-reversed addressing — all essential for implementing advanced motor control algorithms like Field-Oriented Control (FOC) and digital power supply control loops. With 256 KB of Flash program memory, 16 KB of RAM, and six DMA channels, there is ample code and data space for complex applications. The PWM module features 2.1 nanosecond resolution with programmable dead-band and fault protection inputs, enabling high-efficiency, high-frequency power conversion. The 12-bit SAR ADC with multiple cores supports simultaneous sampling of multiple analog channels, critical for multi-phase motor control. A CAN 2.0B controller with 32 message buffers enables robust industrial and automotive networking. Two quadrature encoder interfaces support dual-axis position feedback for multi-motor or dual-encoder applications. Packaged in a 64-lead TQFP with industrial temperature range (-40°C to +85°C), the DSPIC33EV256GM106-I offers an excellent balance of performance, peripheral count, and 5V noise immunity for demanding embedded control applications.

Working Principle: DSPIC33EV256GM106-I Working Principle

The DSPIC33EV256GM106-I uses the same 5V-capable dsPIC33EV architecture as other family members, but with expanded peripheral and I/O capabilities enabled by the 64-pin package. The core operates from a 3.3V internal supply generated by an on-chip linear regulator that steps down the 5V I/O supply, providing the power efficiency of a 3.3V core with the noise immunity of 5V I/O buffers. The dsPIC CPU is a 16-bit modified Harvard architecture with a 24-bit instruction word and separate program and data buses, achieving single-cycle instruction execution for most instructions at 70 MIPS. The DSP engine within the core provides hardware-accelerated multiply-accumulate operations using a 17×17-bit multiplier and 40-bit accumulator pair, plus barrel shifting and bit-reversed addressing for efficient digital signal processing. The PWM subsystem in this 64-pin variant supports up to 14 PWM outputs organized as 7 complementary pairs, each with independent time base, dead-band generation, and fault input capability — allowing control of multiple motors or multiple power stages from a single device. The high 2.1 ns resolution of the PWM generators enables high-frequency operation for digital power applications and smooth, low-distortion motor control. The analog subsystem includes a multi-core 12-bit SAR ADC with up to 49 input channels, supporting simultaneous sampling across multiple channels, plus four integrated operational amplifiers that can be configured as differential amplifiers for current sensing or as general-purpose signal conditioning. Multiple analog comparators with programmable DAC references provide fast over-current and over-voltage protection. The 6-channel DMA controller offloads data movement between peripherals and RAM, allowing the CPU to focus on algorithm computation. Two quadrature encoder interfaces (QEI) provide direct hardware support for incremental position encoders on two independent axes, enabling multi-axis position control. The CAN 2.0B controller supports standard and extended frames with 32 message buffers, suitable for industrial CANopen and automotive CAN networking. The combination of 5V tolerance, rich peripherals, and DSP performance makes this device particularly well-suited for multi-motor control and high-channel-count digital power applications in noisy environments.

Pin Description: DSPIC33EV256GM106-I Pin Definition and Functions

The DSPIC33EV256GM106-I is available in a 64-lead TQFP package. Major pin groups:

Pin Group Approx. Count Description
Power & Ground 8 VDD (5V), VSS, AVDD, AVSS, VREG, VCAP
Oscillator 2 OSC1/CLKI, OSC2/CLKO
Digital I/O Ports Up to 53 Ports RA through RG (5V tolerant, multiplexed)
Analog Inputs Up to 49 AN0-AN48 (shared with digital pins)
PWM Outputs 14 PWM1H/L through PWM7H/L (7 complementary pairs)
Fault Inputs 4 FLT1-FLT4 (PWM fault protection inputs)
CAN Bus 2 C1RX, C1TX (CAN 2.0B controller)
UART 6 3 UART ports (RX/TX each)
SPI ~8 2 SPI modules (SCK, SDI, SDO, SS each)
I2C 4 2 I2C modules (SDA, SCL each)
QEI / Encoder 6 2 channels (QEA, QEB, IND each)
Op Amps ~12 4 op amps (IN+, IN-, OUT each)
Comparators ~8 Comparator inputs and outputs
Debug/Program 3 PGEC1, PGED1, MCLR

Note: Many pins have multiple multiplexed functions. Exact pin assignments depend on package variant and pin configuration settings. Refer to the official dsPIC33EV256GM106 datasheet and pinout diagrams for complete details.

Application Scenarios: In which products and applications is DSPIC33EV256GM106-I used
  • Multi-Axis Motor Control: Used in dual-axis and multi-motor control systems including robotics, CNC machines, 3D printers, and industrial positioning stages, where multiple PWM channels and quadrature encoder interfaces enable independent control of two or more motors from a single DSC
  • High-Performance Motor Drives: Deployed in PMSM/BLDC motor drives with Field-Oriented Control (FOC), AC induction motor VFDs, and servo controllers requiring high-resolution PWM, fast ADC, and DSP processing capability
  • Digital Power & PFC: Used in high-efficiency switch-mode power supplies, interleaved PFC circuits, and multi-phase DC-DC converters where multiple PWM channels and high resolution enable advanced digital control topologies
  • Automotive Electronics (5V): Used in automotive motor control applications (fuel pumps, cooling fans, blower motors) and body electronics with 5V supply systems, benefiting from the 5V I/O noise immunity and CAN controller
  • Industrial Drives & Automation: Found in variable frequency drives, conveyor controllers, and industrial automation systems requiring robust 5V operation, CAN communication, and multiple motor control channels
  • Robotics & Motion Control: Deployed in mobile robots, robotic arms, and motion controllers where multi-axis coordination, real-time control, and reliable communication are essential
  • Renewable Energy Micro-Inverters: Used in solar micro-inverters and small wind power converters where the DSP engine handles MPPT, grid-tie control, and power conversion algorithms
  • CAN-Based Distributed Control: Serves as intelligent CAN nodes in industrial and automotive distributed control systems, combining local motor control or sensor processing with CAN 2.0B network communication
Alternative Models: What chips are recommended as replacements for DSPIC33EV256GM106-I
Part Number Manufacturer Flash PWM ADC Ch Package
DSPIC33EV256GM106-I Microchip 256KB 14ch 49ch 64-TQFP
DSPIC33EV256GM104-I Microchip 256KB 8ch 27ch 44-TQFP
DSPIC33EV64GM106-I Microchip 64KB 14ch 49ch 64-TQFP
DSPIC33EP512GM710-I Microchip 512KB 16ch 43ch 100-TQFP
STM32G474VE ST 512KB 40ch 36ch 100-LQFP
TMS320F28075 TI 512KB 24ch 24ch 100-PZFP

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1