Opens in a new tab

DSPIC33FJ64GS606-50I

16-bit dsPIC DSC for digital power, 50MIPS, 64KB Flash, 12 PWM (2ns), 4Msps ADC, 64-TQFP, Microchip dsPIC33FJ64GS606-50I

2100

Effective Inventory

Image for reference only

Manufacturer Part:

DSPIC33FJ64GS606-50I

Package:

64-Lead TQFP (12mm × 12mm), surface mount

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DSPIC33FJ64GS606-50I is a high-performance 16-bit digital signal controller from Microchip’s dsPIC33FJ ‘GS’ series, specifically designed for digital power supply and SMPS (Switched Mode Power Supply) applications. Housed in a 64-pin TQFP package, this device features a 50 MIPS dsPIC DSC core with integrated DSP engine, 64 KB of Flash program memory, 9 KB of RAM, and an advanced high-speed PWM module with up to 12 PWM outputs at 2.0 ns resolution — specifically optimized for digital power control. The peripheral set also includes a high-speed 10-bit ADC with up to 4 Msps throughput, high-speed analog comparators, operational amplifiers, and multiple communication interfaces (UART, SPI, I2C, CAN). With its high-resolution PWM, fast ADC, and dedicated digital power peripherals, the DSPIC33FJ64GS606-50I is ideal for high-efficiency switch-mode power supplies, DC-DC converters, power factor correction (PFC), digital lighting, and renewable energy applications.

Key Specifications

Parameter Value
Manufacturer Microchip Technology Inc.
Part Number DSPIC33FJ64GS606-50I/PT
Product Type 16-Bit DSC for Digital Power / SMPS
Core Architecture dsPIC DSC (modified Harvard, 16-bit)
CPU Speed 50 MIPS (100 MHz maximum)
Program Memory (Flash) 64 KB (32K x 24-bit instructions)
Data Memory (RAM) 9 KB
DMA Channels 4 channels
Operating Voltage 3.0 V to 3.6 V
Digital I/O Pins Up to 53 (64-pin package)
10-bit ADC Up to 4 Msps, 16 channels, 4 SAR cores
High-Speed PWM 12 outputs (6 pairs), 2.0ns resolution
PWM Features Dead-band, fault, phase shifting, current mode
High-Speed Comparators 4 analog comparators with 12ns response
Op Amps 4 integrated operational amplifiers
CAN Controller 1 x CAN 2.0B (32 message buffers)
UART / SPI / I2C 2 UART, 2 SPI, 2 I2C
Quadrature Encoder Interface 1 channel
Input Capture / Output Compare 9 IC / 9 OC
Timers 9 x 16-bit (or 4 x 32-bit)
Operating Temperature -40°C ~ +85°C (I suffix, industrial)
Package / Case 64-Lead TQFP (12mm × 12mm)
Mounting Type Surface Mount
RoHS RoHS Compliant
Product Status Active / In Production

Features

  • High-performance 16-bit dsPIC DSC core, 50 MIPS
  • Optimized for digital power supply (SMPS) applications
  • Integrated DSP engine (MAC, barrel shifter, bit reversal)
  • 64 KB Flash program memory, 9 KB RAM
  • 4-channel DMA controller
  • High-speed PWM: 12 outputs, 2.0ns resolution
  • 6 complementary PWM pairs with independent time bases
  • Programmable dead-band and phase shifting
  • Current-mode control support
  • 4 fault input pins for fast protection
  • 10-bit ADC, 4 Msps, 4 SAR cores, 16 channels
  • Simultaneous sampling on multiple channels
  • 4 high-speed analog comparators (12ns response)
  • 4 integrated operational amplifiers
  • CAN 2.0B controller (32 message buffers)
  • 2 UART, 2 SPI, 2 I2C
  • Quadrature encoder interface (QEI)
  • 9 input capture / 9 output compare modules
  • Brown-out reset, power-on reset, WDT
  • Industrial temperature range: -40°C ~ +85°C
  • 64-pin TQFP package
  • RoHS compliant

Applications

  • Digital power supplies (SMPS)
  • DC-DC converters (buck, boost, buck-boost)
  • Power factor correction (PFC)
  • AC-DC power converters
  • Digital lighting and LED drivers
  • Uninterruptible power supplies (UPS)
  • Renewable energy (solar inverters, wind)
  • Battery chargers and management systems
  • Server and telecom power supplies
  • High-efficiency digital power conversion
Product Introduction: DSPIC33FJ64GS606-50I Product Introduction

The DSPIC33FJ64GS606-50I is a dedicated digital power supply 16-bit digital signal controller from Microchip’s dsPIC33FJ ‘GS’ (Green Switching) family, designed specifically for high-efficiency switch-mode power supplies and digital power conversion applications. Unlike general-purpose dsPIC devices, the GS series features an enhanced PWM module with exceptional 2.0 nanosecond resolution, multiple high-speed ADC cores, fast analog comparators, and integrated op amps — all optimized for implementing high-frequency digital power control loops. The dsPIC core operates at 50 MIPS and integrates a full DSP engine with single-cycle 16×16 multiply-accumulate capability, a 40-bit accumulator pair, barrel shifter, and bit-reversed addressing — essential for implementing advanced digital control algorithms like digital compensators (PID/PI controllers, 2-pole 2-zero filters), current-mode control, and feed-forward control. The high-speed PWM module is the centerpiece of the GS series: it provides 12 PWM outputs arranged as 6 complementary pairs, each with an independent time base, programmable dead-band generation, phase-shifting capability, and fault protection inputs. The 2.0ns resolution enables very high switching frequencies (well into the MHz range) with precise duty cycle control, maximizing power supply efficiency and enabling the use of smaller passive components. The 4-channel 10-bit ADC achieves up to 4 megasamples per second with simultaneous sampling capability — critical for multi-channel power supply current and voltage sensing. Four high-speed analog comparators with 12 nanosecond response time provide cycle-by-cycle current limiting and fast fault protection. Four integrated operational amplifiers eliminate the need for external current sense amplifiers in many designs. With 64 KB of Flash program memory, 9 KB of RAM, and 4 DMA channels, there are sufficient resources for complex digital power control algorithms. Communication peripherals include CAN 2.0B for power system networking, plus UART, SPI, and I2C. Packaged in a 64-pin TQFP with industrial temperature range, the DSPIC33FJ64GS606-50I is the ideal choice for high-efficiency digital power supplies, PFC circuits, LED drivers, and renewable energy applications.

Working Principle: DSPIC33FJ64GS606-50I Working Principle

The DSPIC33FJ64GS606-50I operates as a digital power controller that replaces traditional analog PWM controller ICs with a fully programmable digital solution. At the core is the 50 MIPS dsPIC DSC, which runs the power supply control algorithm in software — this allows the control loop characteristics (gain, bandwidth, compensation) to be dynamically adjusted, and enables sophisticated features like adaptive control, nonlinear compensation, and communication interfaces that would be difficult or impossible with analog controllers. The high-speed PWM module generates the gate drive signals for the power switching devices (MOSFETs, IGBTs). With 2.0 nanosecond resolution, the PWM duty cycle can be adjusted with extremely fine granularity, even at switching frequencies of 1 MHz or higher. Each PWM pair can be configured for complementary mode (with dead-band to prevent shoot-through), independent mode, or push-pull mode, and phase shifting between multiple channels enables interleaved power converter topologies. The 4-channel 10-bit SAR ADC simultaneously samples multiple analog signals (input voltage, output voltage, inductor current, switch current, etc.) at up to 4 Msps total throughput. The ADC can be triggered by the PWM module at specific points in the switching cycle (e.g., at the midpoint of the on-time), ensuring that current and voltage measurements are taken at optimal moments to avoid switching noise. The high-speed comparators provide cycle-by-cycle current limiting: if the switch current exceeds a programmed threshold, the comparator immediately terminates the current PWM cycle, providing fast over-current protection without CPU intervention — response time is just 12 nanoseconds. The integrated op amps are typically used to amplify the voltage across current sense shunts, providing differential amplification for accurate current measurement. The DMA controller transfers ADC results and PWM duty cycle values in the background, allowing the CPU to focus on running the control algorithm (typically a digital compensator implemented using the DSP engine’s MAC instructions). The overall architecture enables a fully digital control loop: the ADC samples the output voltage/current, the DSP engine runs the compensation algorithm (PI/PID controller, or more advanced 2P2Z/3P3Z digital filters), and the PWM module applies the new duty cycle — all completed within a single switching cycle for high-bandwidth, stable control loops.

Pin Description: DSPIC33FJ64GS606-50I Pin Definition and Functions

The DSPIC33FJ64GS606-50I is available in a 64-lead TQFP package. Major pin groups:

Pin Group Approx. Count Description
Power & Ground 8 VDD, VSS, AVDD, AVSS (3.3V)
Oscillator 2 OSC1/CLKI, OSC2/CLKO
Digital I/O Ports Up to 53 Ports RA through RG (3.3V I/O)
Analog Inputs (ADC) 16 AN0-AN15 (10-bit ADC inputs)
High-Speed PWM 12 PWM1H/L through PWM6H/L (6 pairs)
Fault Inputs 4 FLT1-FLT4 (PWM fault protection)
CAN Bus 2 C1RX, C1TX (CAN 2.0B)
UART 4 2 UART ports (RX/TX each)
SPI ~6 2 SPI modules (SCK, SDI, SDO, SS)
I2C 4 2 I2C modules (SDA, SCL each)
High-Speed Comparators ~12 4 comparators (IN+, IN-, OUT each)
Op Amps ~12 4 op amps (IN+, IN-, OUT each)
QEI / Encoder 3 QEA, QEB, IND (1 channel)
Input Capture / Output Compare ~12 9 IC, 9 OC modules
Debug/Program 3 PGEC1, PGED1, MCLR

Note: Many pins have multiple multiplexed functions. Exact pin assignments depend on package variant and pin configuration settings. Refer to the official dsPIC33FJ64GS606 datasheet for complete pin descriptions and pinout diagrams.

Application Scenarios: In which products and applications is DSPIC33FJ64GS606-50I used
  • Digital Power Supplies (SMPS): Used in high-efficiency switch-mode power supplies for servers, telecom, datacom, and consumer electronics, implementing digital control loops with adaptive compensation for optimal efficiency across load ranges
  • DC-DC Converters: Deployed in buck, boost, buck-boost, flyback, and forward converter topologies, supporting multi-phase and interleaved operation with phase-shifted PWM for high-current applications
  • Power Factor Correction (PFC): Used in active PFC circuits for power supplies, LED drivers, and motor drives, where the DSP engine runs PFC control algorithms (CRM, DCM, CCM) to achieve high power factor (>0.99) and low total harmonic distortion
  • Digital Lighting & LED Drivers: Used in high-power LED drivers, street lighting, and stage lighting, implementing constant-current control with dimming, color mixing, and power line communication
  • Uninterruptible Power Supplies (UPS): Deployed in online UPS systems for inverter control, battery charger management, and grid synchronization, leveraging the high-resolution PWM and fast control loop capability
  • Renewable Energy: Used in solar micro-inverters, DC optimizers, small wind power converters, and battery energy storage systems where the DSP engine handles MPPT algorithms and grid-tie control
  • Battery Chargers & BMS: Used in battery chargers for EVs, industrial batteries, and consumer electronics, implementing multi-stage charging profiles and battery management functions
  • Server & Telecom Power: Deployed in high-density server power supplies and telecom rectifiers requiring high efficiency (80+ Titanium/Platinum), digital communication (PMBus), and advanced power management features
Alternative Models: What chips are recommended as replacements for DSPIC33FJ64GS606-50I
Part Number Manufacturer Flash PWM ADC Package
DSPIC33FJ64GS606-50I Microchip 64KB 12ch (2ns) 10-bit, 4Msps 64-TQFP
DSPIC33FJ16GS502-50I Microchip 16KB 8ch (2ns) 10-bit, 4Msps 28-SOIC
DSPIC33FJ32GS606-50I Microchip 32KB 12ch (2ns) 10-bit, 4Msps 64-TQFP
DSPIC33EP64GS504-I Microchip 64KB 10ch (250ps) 12-bit, 3.5Msps 44-TQFP
UCD3138 TI 128KB 6ch DPWM 12-bit 64-TQFP
STM32G474 ST 128KB HRTIM 12-bit 64-LQFP

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1