Opens in a new tab

DTC143ZET1G

NPN digital transistor with built-in R1=4.7kOhm/R2=4.7kOhm, 50V VCEO, 100mA IC in ultra-compact SC-105 (1.6×0.8mm)

9249

Effective Inventory

Image for reference only

Manufacturer Part:

DTC143ZET1G

Package:

SC-105 / SOT-523F (1.60 x 0.80 x 0.50 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DTC143ZET1G from onsemi is an NPN digital transistor with built-in bias resistors in an ultra-compact SC-105 (SOT-523F) package measuring just 1.6 x 0.8mm. It integrates R1=4.7kOhm and R2=4.7kOhm resistors (Z suffix), eliminating external bias components and simplifying circuit design for digital logic interfacing.

Key Specifications

Type NPN Digital Transistor (Built-in Resistors)
Built-in R1 4.7kOhm
Built-in R2 4.7kOhm
VCEO 50V
IC (Continuous) 100mA
Input Voltage (VIN) Up to 10V
hFE (DC Current Gain) ~30 @ VIN=5V
Power Dissipation 150mW @ TA=25°C
Package SC-105 (SOT-523F) (1.6 x 0.8mm)
Operating Temperature -55°C ~ +150°C

Features

  • Integrated base resistors eliminate external bias components
  • Ultra-compact SC-105 package for maximum board space savings
  • Direct digital logic drive capability (CMOS/TTL compatible)
  • Resistor values (R1=R2=4.7kOhm) optimized for 5V logic interfacing
  • Lead-free and RoHS compliant
  • Reduces component count and PCB area

Applications

  • Digital logic level interfacing
  • LED indicator drivers
  • Relay and solenoid low-side drivers
  • Signal inversion (NOT gate function)
  • Motor driver pre-drivers
Product Introduction: DTC143ZET1G Product Introduction

The DTC143ZET1G from onsemi is an NPN digital transistor with integrated bias resistors designed for direct digital logic-to-power interfacing. The device incorporates a 4.7kOhm input resistor (R1) and 4.7kOhm base-emitter shunt resistor (R2), eliminating the need for external bias components. This integration reduces component count, simplifies PCB layout, and improves reliability. The Z suffix indicates R1=R2=4.7kOhm, providing a DC current gain of approximately 30 at VIN=5V, suitable for direct drive from 5V CMOS logic. The ultra-compact SC-105 (SOT-523F) package measuring just 1.6 x 0.8mm makes it ideal for space-constrained applications.

Working Principle: DTC143ZET1G Working Principle

The DTC143ZET1G integrates a standard NPN bipolar transistor with two resistors in a single package. R1 (4.7kOhm) is connected in series between the input pin (B) and the transistor base, limiting base current. R2 (4.7kOhm) is connected between the base and emitter, providing a discharge path to turn the transistor off quickly when the input goes low. When a logic high voltage is applied to the input, current flows through R1 into the base, turning the transistor on and allowing collector current to flow. When the input goes low, R2 discharges the base-emitter capacitance, ensuring fast turn-off. The effective hFE is designed to provide approximately 30x gain at 5V input.

Pin Description: DTC143ZET1G Pin Definition and Functions
Pin Name Function
1 B Base input – connect to logic drive (through built-in R1)
2 E Emitter – connect to ground
3 C Collector – connect to load
Application Scenarios: In which products and applications is DTC143ZET1G used
  • MCU LED Indicator Driver: Direct GPIO drive through built-in R1; 100mA sink capability drives high-brightness LEDs
  • Relay Low-Side Switch: 50V VCEO and 100mA IC suit small signal relay coils; built-in resistors simplify BOM
  • Logic Level Inverter: Functions as single-transistor NOT gate
  • Motor Pre-Driver: Drives gate of power MOSFET with logic-level control input
Alternative Models: What chips are recommended as replacements for DTC143ZET1G
Model Manufacturer Key Difference
DTC143XEFT1G onsemi R1=4.7kOhm, R2=10kOhm, EMT3F package
DTC143ZCAT1G onsemi R1=4.7kOhm, R2=4.7kOhm, SOT-416
MMUN2211LT1G onsemi R1=10kOhm, R2=10kOhm, SOT-23
PDTA143ZM Nexperia PNP complement, R1=R2=4.7kOhm
DTC114YET1G onsemi R1=10kOhm, R2=10kOhm, SC-105

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1