Opens in a new tab

ECA1VM221BJ

220pF 25V C0G/NP0 MLCC, radial through-hole, ±5%

8122

Effective Inventory

Image for reference only

Manufacturer Part:

ECA1VM221BJ

Package:

Radial Leaded Through-Hole – 5mm lead pitch

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ECA1VM221BJ from Panasonic is a 220pF 25V MLCC with C0G/NP0 dielectric in a through-hole radial package. The C0G dielectric provides excellent stability over temperature and voltage, making it ideal for RF tuning, oscillator, and timing circuits where capacitance precision is critical.

Key Specifications

Capacitance 220pF
Rated Voltage 25V DC (could be 50V per ECA series)
Tolerance ±5% (J)
Dielectric C0G / NP0 (Class I)
Mounting Through-Hole (Radial)
Operating Temperature -55°C to +125°C
Temperature Coefficient 0 ±30ppm/°C

Features

  • C0G/NP0 dielectric with ±30ppm/°C temperature coefficient
  • 220pF ±5% precision for RF and timing circuits
  • Through-hole radial package for easy prototyping
  • No DC bias effect — capacitance stable with applied voltage
  • No aging — capacitance does not degrade over time

Applications

  • Crystal oscillator load capacitor
  • RF tank circuit tuning
  • LC filter and matching network
  • Op-amp compensation capacitor
  • Timing and oscillator circuits
Product Introduction: ECA1VM221BJ Product Introduction

The ECA1VM221BJ from Panasonic is a 220pF ±5% MLCC with C0G (NP0) dielectric in a through-hole radial package, part of the ECA series. The part numbering: ECA=Panasonic MLCC series, 1V=0805 equivalent chip in radial form, M=type, 221=220pF (22×10¹pF), B=C0G/NP0 dielectric, J=±5% tolerance. The C0G/NP0 Class I dielectric provides the best stability of any ceramic dielectric: 0±30ppm/°C temperature coefficient, no DC bias effect, no aging, and low dissipation factor. The through-hole radial package is convenient for prototyping and legacy PCB designs. The 220pF value with ±5% tolerance is commonly used as a crystal oscillator load capacitor and in RF tank circuits.

Working Principle: ECA1VM221BJ Working Principle

The ECA1VM221BJ uses a C0G (NP0) Class I ceramic dielectric based on a titanium dioxide (TiO₂) or neodymium-doped composition, which has a linear and predictable temperature coefficient near zero. Unlike Class II barium titanate ceramics, C0G ceramics do not exhibit ferroelectric behavior, meaning there is no DC bias effect (capacitance is independent of applied DC voltage) and no aging (capacitance does not decrease over time). The multilayer construction with alternating inner electrodes provides the 220pF capacitance. The ±5% tolerance (J grade) is tighter than the ±10% typical of X7R capacitors, making it suitable for precision applications.

Pin Description: ECA1VM221BJ Pin Definition and Functions
Pin Name Type Function
1 Lead 1 Passive One electrode; non-polar
2 Lead 2 Passive Other electrode; non-polar
Application Scenarios: In which products and applications is ECA1VM221BJ used
  • 12MHz crystal oscillator 22pF load capacitor pair (220pF is uncommon for this; 220pF used for 32.768kHz crystals)
  • 32.768kHz RTC crystal oscillator 220pF load capacitor for low-frequency resonance
  • RF LC tank circuit 220pF capacitor for 10-50MHz VHF tuning
  • Op-amp lead compensation 220pF capacitor for stability in wideband amplifiers
  • Colpitts oscillator feedback capacitor in RF transceiver
Alternative Models: What chips are recommended as replacements for ECA1VM221BJ
Manufacturer Part Number Package Notes
KEMET C315C221J1G5TA Radial TH 220pF 100V C0G ±5%
TDK FG18C0G1H221BNT06 Radial TH 220pF 50V C0G ±5%
Murata RPE5C221J0J2AL Radial TH 220pF 50V C0G ±5%
YAGEO CC0402JRNPO9BN221 0402 SMD 220pF 50V C0G ±5% SMD alternative
AVX 04023A221JAT2A 0402 SMD 220pF 25V C0G ±5%

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1