Opens in a new tab

ECQU2A224ML

0.22μF 275VAC X2/Y2 safety film capacitor, metallized polyester, radial 15mm

11654

Effective Inventory

Image for reference only

Manufacturer Part:

ECQU2A224ML

Package:

Radial Leaded – 17.5 x 8.0 x 16.0mm, 15mm lead pitch

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ECQU2A224ML from Panasonic is a 0.22μF metallized polyester film capacitor in the ECQUL series, rated at 275VAC. Class X2 safety certified per IEC 60384-14, this interference suppression capacitor is designed for across-the-line EMI filtering in AC power input circuits. Note: This product has been discontinued by Panasonic; check availability before new designs.

Key Specifications

Capacitance 0.22μF (220nF)
Tolerance ±20% (M)
Rated Voltage 275VAC (Class X2)
Dielectric Metallized Polyester (MPET)
Safety Class X2 (IEC 60384-14), Y2/X2
Dissipation Factor ≤1.0% @ 1kHz, 20°C
Insulation Resistance ≥15,000MΩ (C≤0.33μF)
Category Temperature -40°C to +100°C (85°C max per UL/CSA)
Lead Pitch 15mm
Body Size 17.5 x 8.0 x 16.0mm

Features

  • Class X2 safety certification per IEC 60384-14 for across-the-line applications
  • Also Y2/X2 rated for line-to-ground suppression
  • Metallized polyester self-healing dielectric for reliability
  • Internal fuse safety mechanism for fault isolation
  • Flame-retardant PBT case and non-combustible polyurethane filling

Applications

  • AC power line EMI suppression (across-the-line)
  • Switch-mode power supply EMI input filter
  • Antenna coupling and line-by-pass filtering
  • Industrial equipment power line filtering
  • Consumer electronics AC line noise suppression
Product Introduction: ECQU2A224ML Product Introduction

The ECQU2A224ML from Panasonic is a 0.22μF ±20% metallized polyester (MPET) film capacitor in the ECQUL series, rated at 275VAC and certified as Class X2 per IEC 60384-14 / EN132400 for across-the-line EMI suppression. The capacitor also carries Y2/X2 certification for line-to-ground applications. The self-healing metallized polyester dielectric provides reliable operation by clearing localized dielectric breakdowns through evaporation of the thin metallization around the fault site. The internal fuse safety mechanism isolates a faulty capacitor section, preventing catastrophic failure. The flame-retardant PBT case (UL 94V-0) and non-combustible polyurethane resin filling provide additional safety. Note: This product has been discontinued; consult Panasonic for replacement options.

Working Principle: ECQU2A224ML Working Principle

The ECQU2A224ML uses a metallized polyester (MPET) dielectric construction. A thin layer of aluminum is vacuum-deposited on one side of the polyester film, and two such metallized films are wound with the metallized surfaces offset so that each extends to one edge of the winding. Zinc or zinc/tin metallic spray is applied to each end to connect all the turns of the same electrode. The self-healing property is achieved because the metallization is extremely thin (approximately 20-50nm). When a localized dielectric breakdown occurs, the arc current vaporizes the thin metallization around the fault, creating a cleared zone that isolates the defect. The capacitor continues to function with only a negligible reduction in capacitance. The internal fuse mechanism uses narrowed metallization sections that act as fuses under sustained fault conditions, disconnecting only the affected section while maintaining overall capacitor function.

Pin Description: ECQU2A224ML Pin Definition and Functions
Pin Name Type Function
1 Lead 1 Passive One electrode; connect across AC line (L-N) or line-to-ground
2 Lead 2 Passive Other electrode
Application Scenarios: In which products and applications is ECQU2A224ML used
  • Switch-mode power supply AC input EMI filter X2 capacitor across line-neutral
  • Industrial variable frequency drive AC line input EMI suppression filter
  • Consumer appliance AC power line noise filter capacitor
  • Smart meter power supply EMI filter across-the-line capacitor
  • LED driver AC input EMI suppression X2 safety capacitor
Alternative Models: What chips are recommended as replacements for ECQU2A224ML
Manufacturer Part Number Package Notes
KEMET R463222570M2M1K Radial 0.22μF 275VAC X2
TDK B32023A3224M000 Radial 0.22μF 275VAC X2
Vishay BFC233820224 Radial 0.22μF 275VAC X2
Wurth Elektronik 890334022016CS Radial 0.22μF 275VAC X2
Panasonic ECQU2A224KB Radial 0.22μF 275VAC X2 ±10%

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1