Opens in a new tab

EM4095HMSO16B+

125kHz RFID reader IC, SO-16

7056

Effective Inventory

Image for reference only

Manufacturer Part:

EM4095HMSO16B+

Package:

SO-16 (10.30 x 7.50 x 2.65 mm)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

EM4095HMSO16B+ Overview

The EM4095HMSO16B+ is a 125kHz RFID reader IC from EM Microelectronic integrating an antenna driver and AM demodulator, supporting ASK/PSK modulation, in an SO-16 package, widely used in access control systems and animal identification.

Key Features

  • Operating frequency: 125kHz
  • Modulation: ASK/PSK
  • Antenna drive current: 250mA
  • Supply voltage: 5V
  • Built-in AM demodulator
Product Introduction: EM4095HMSO16B+ Product Introduction

The EM4095HMSO16B+ is an integrated 125 kHz RFID reader analog front-end IC from EM Microelectronic in an SOIC-16 package, designed for proximity RFID read/write systems. It integrates the antenna driver, AM modulator, AM demodulator, and PLL system requiring no external quartz crystal. The device supports all common 125 kHz transponder protocols (EM4100, EM4102, EM4200, EM4450, EM4205/EM4305) and communicates with a host microcontroller via a simple parallel interface. Operating from a 5 V supply with 1 uA sleep mode current, it is RoHS compliant and rated for -40 C to +85 C operation.

Working Principle: EM4095HMSO16B+ Working Principle

The EM4095HMSO16B+ operates as a 125 kHz RFID reader front-end by generating a continuous carrier signal that energizes passive transponder tags through the antenna coil. A built-in PLL system automatically locks the carrier frequency to the antenna resonant frequency, eliminating the need for a quartz crystal reference. The antenna driver outputs (ANT1 and ANT2) drive a resonant LC antenna circuit at 125 kHz, creating an electromagnetic field that powers nearby transponders. When a transponder modulates its load (amplitude-shift keying or phase-shift keying), the change in the antenna field is detected by the EM4095 receiver. The received signal is amplified, filtered, and demodulated using synchronous detection referenced to the carrier. The demodulated data appears as a serial bitstream at the DEMOD_OUT pin for MCU decoding. The MOD pin allows the MCU to modulate the carrier for writing to read/write transponders by switching the antenna driver on and off (100 percent ASK modulation). The SHD (shutdown) pin enables the MCU to power down the reader between polling cycles, reducing current to 1 uA. The RDY/CLK output provides a clock signal synchronized to the antenna driver, useful for timing the demodulated data sampling.

Pin Description: EM4095HMSO16B+ Pin Definition and Functions
Pin Name Description
1 VSS Ground
2 ANT2 Antenna driver output 2; connects to antenna coil
3 ANT1 Antenna driver output 1; connects to antenna coil
4 VDD Power supply (4.5 V to 5.5 V)
5 MOD Modulation input; MCU drives high to modulate carrier for write operations
6 CDEM Demodulator capacitor; connect 10 nF to VSS for carrier filtering
7 AGND Analog ground
8 DEMOD_OUT Demodulated data output; serial bitstream to MCU for protocol decoding
9 SHD Shutdown input; active high, disables antenna driver and receiver
10 FCAP Filter capacitor; connect 1 nF to VSS for receiver filter
11 MOD2 Modulation depth control; connect to VSS or VDD
12 RDY/CLK Ready/clock output; provides synchronized clock to MCU
13-16 NC No connect
Application Scenarios: In which products and applications is EM4095HMSO16B+ used
  • Access Control: 125 kHz proximity card readers for door entry and security systems
  • Animal Identification: Livestock and pet microchip reading for veterinary and agricultural tracking
  • Asset Tracking: Inventory management using 125 kHz transponder tags on tools and equipment
  • Vehicle Immobilizers: Key transponder reading in automotive anti-theft systems
  • Time and Attendance: Employee badge reading for workforce management terminals
Alternative Models: What chips are recommended as replacements for EM4095HMSO16B+
Model Manufacturer Frequency Protocols Package Notes
EM4095P16B+ EM Microelectronic 125 kHz EM410x, EM4150 DIP-16 Through-hole version
TMS3705B Texas Instruments 134.2 kHz TIRIS SOIC-16 TI RFID reader IC
U2270B Microchip/atmel 125 kHz Various SOIC-16 Legacy replacement
MFRC522 NXP 13.56 MHz ISO 14443A/B QFN-32 HF RFID alternative
CLRC663 NXP 13.56 MHz Multi-protocol QFN-40 Advanced NFC reader

EM4095HMSO16B+ is a 125-134kHz RFID read/write analog front-end from EM Microelectronic in SOIC-16. The EM4095P16B+ is the DIP-16 through-hole version. EM4325 provides an integrated reader + transponder solution. The TMS3705A from TI offers similar 134.2kHz FDX-B reader functionality. For 13.56MHz HF RFID, MFRC522 from NXP provides ISO 14443 A/B reader capability. The EM4100 protocol compatibility enables reading of widely available EM4100/EM4102 transponder cards.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1