Opens in a new tab

Home » Integrated Circuits ICs » EMMC04G-M627-A01

EMMC04G-M627-A01

4GB eMMC 5.1 flash storage, HS400 up to 400MB/s, BGA-153, boot/RPMB partitions for embedded systems

2567

Effective Inventory

Image for reference only

Manufacturer Part:

EMMC04G-M627-A01

Package:

BGA-153 (11.50 x 13.00 x 1.00 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EMMC04G-M627-A01 is a 4GB eMMC (embedded MultiMediaCard) 5.1 compliant flash memory module in a BGA-153 (11.5×13.0mm) package. It provides high-density non-volatile storage with HS400 interface speeds up to 400MB/s, designed for embedded applications requiring reliable mass storage in a compact footprint.

Key Specifications

Storage Capacity 4GB
Interface eMMC 5.1
Max Data Rate HS400 (up to 400MB/s)
Package BGA-153 (11.5 x 13.0mm)
Supply Voltage (I/O) 3.3V / 1.8V / 1.2V
NAND Type TLC/MLC (manufacturer dependent)
Boot Partition Yes (dual boot partitions)
RPMB Partition Yes (Replay Protected Memory Block)
Operating Temperature -25°C ~ +85°C

Features

  • eMMC 5.1 compliant with Command Queueing (CQ) for improved random I/O performance
  • HS400 data rate for maximum read/write throughput
  • Dual boot partitions for fail-safe firmware updates
  • RPMB partition for secure storage of authentication data
  • Internal NAND management including wear leveling and ECC
  • Power-off data protection with sudden power loss immunity
  • Compact BGA-153 footprint for space-constrained designs

Applications

  • Smartphones and tablets
  • Embedded Linux and Android systems
  • Automotive infotainment storage
  • Industrial IoT gateways
  • Set-top boxes and smart TVs
Product Introduction: EMMC04G-M627-A01 Product Introduction

The EMMC04G-M627-A01 is a 4GB eMMC 5.1 compliant embedded flash memory module in a BGA-153 package. It integrates NAND flash memory and a flash memory controller in a single package, providing a complete mass storage solution that abstracts the complexity of NAND management from the host processor. The eMMC 5.1 specification adds Command Queueing (CQ) which significantly improves random I/O performance by allowing the host to queue multiple commands. The device supports HS400 mode with data rates up to 400MB/s. The internal controller manages wear leveling, bad block management, and ECC, ensuring reliable data storage over the device lifetime. Dual boot partitions and RPMB (Replay Protected Memory Block) provide secure and fail-safe storage for firmware and authentication data.

Working Principle: EMMC04G-M627-A01 Working Principle

The EMMC04G-M627-A01 integrates a NAND flash memory array with an intelligent controller. The controller manages all NAND-specific operations including wear leveling (distributing writes across all blocks to maximize endurance), bad block management (remapping defective blocks to spare areas), and ECC (error correction coding to detect and correct bit errors). The eMMC interface presents a simple block device to the host, similar to an SD card but soldered directly to the PCB. Communication uses a CMD signal for command/response and a DAT0-DAT7 bus for data transfer. The HS400 mode uses DDR (double data rate) signaling on the data bus with a 200MHz clock to achieve 400MB/s. Command Queueing allows the host to issue multiple read/write commands without waiting for each to complete, improving random I/O throughput by enabling the controller to optimize the order of flash operations.

Pin Description: EMMC04G-M627-A01 Pin Definition and Functions
Pin Name Function
A1-A3 DAT0-DAT2 Data bus bits 0-2
B1-B3 DAT3-DAT5 Data bus bits 3-5
C1 CMD Command/response signal
C2 CLK Clock from host
C3 DAT6 Data bus bit 6
D1 DAT7 Data bus bit 7
D2 RST_n Hardware reset (active low)
D3 DS Data strobe (HS400)
E1-E3 VCC Core power supply
F1-F3 VCCQ I/O power supply
G1-G3 VSS Ground
Application Scenarios: In which products and applications is EMMC04G-M627-A01 used
  • Embedded Linux Boot Storage: Dual boot partitions enable A/B firmware update scheme with rollback; 4GB capacity sufficient for minimal Linux rootfs
  • Automotive Infotainment: HS400 mode provides fast map data loading; RPMB secures vehicle authentication keys
  • Industrial IoT Gateway: Internal wear leveling extends flash lifetime in logging applications; power-off protection prevents data corruption
  • Smart TV/Set-Top Box: 4GB stores OS image and user data; eMMC 5.1 Command Queueing improves app launch performance
Alternative Models: What chips are recommended as replacements for EMMC04G-M627-A01
Model Manufacturer Key Difference
EMMC08G-M627-A01 Generic 8GB version, same package
THGBMJG6C8LBAB7 Kioxia 8GB eMMC 5.1, BGA-153
MTFC4GACAJCN-4M-WT Micron 4GB eMMC 5.1, BGA-153, industrial temp
SAMSUNG KLMBG2JETD-B041 Samsung 4GB eMMC 5.1, BGA-153
FEMDCR04G-L7A Longsys 4GB eMMC 5.1, BGA-153

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1