Opens in a new tab

EP4CE15E22C7N

Cyclone IV E FPGA, 15408 LE, 504Kb RAM, 56 mult, 81 I/O, 144-EQFP, C7

11518

Effective Inventory

Image for reference only

Manufacturer Part:

EP4CE15E22C7N

Package:

144-EQFP with Exposed Pad (20 x 20 x 1.45 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EP4CE15E22C7N is a Cyclone IV E FPGA from Intel (formerly Altera) with 15,408 logic elements, 504Kbits of embedded M9K memory, and 56 embedded 18×18 multipliers. The E22 speed grade (C7) in a 144-pin EQFP package with exposed pad provides 81 user I/Os and 4 PLLs. This cost-optimized, low-power FPGA targets high-volume, cost-sensitive applications.

Key Specifications

Logic Elements 15,408
Embedded Memory 504 Kbits (56 x M9K blocks)
18×18 Multipliers 56
PLLs 4
User I/Os 81
Core Voltage 1.2V (typ)
I/O Voltages 1.2V ~ 3.3V
Speed Grade C7 (commercial)
External Memory DDR/DDR2 SDRAM, QDRII+ SRAM
Package 144-EQFP (20 x 20 mm)
Operating Temperature 0C to +85C (commercial)

Features

  • 15,408 logic elements for mid-range DSP and control applications
  • 56 embedded 18×18 multipliers for efficient FIR and FFT operations
  • 504Kbits of M9K memory configurable as RAM, ROM, or FIFO
  • 4 PLLs with dynamic reconfiguration for flexible clock generation
  • DDR/DDR2 SDRAM and QDRII+ SRAM memory interfaces
  • Low total power consumption under 1.5W
  • Compatible with Intel Quartus Prime development software

Applications

  • Industrial motor control and signal processing
  • Video and image processing with DSP pipelines
  • Protocol bridging and bus interface conversion
  • Communication equipment packet processing
Product Introduction: EP4CE15E22C7N Product Introduction

The Intel Cyclone IV E EP4CE15E22C7N is a cost-optimized, low-power FPGA with 15,408 logic elements built on TSMC 60nm low-power process. The EP4CE15 provides sufficient logic density for DSP-intensive applications such as motor control, video processing, and communication protocol handling. The 56 embedded 18×18 multipliers support configurable single 18×18 or dual 9×9 multiplication modes for FIR filters, FFTs, and matrix operations. The 504Kbits of M9K block memory can be configured as single-port RAM, true dual-port RAM, ROM, or FIFO buffers. Four PLLs with five outputs each allow complex clock tree generation. The 144-EQFP package provides 81 user I/Os across 8 I/O banks supporting voltages from 1.2V to 3.3V, with LVDS up to 840Mbps TX and 875Mbps RX.

Working Principle: EP4CE15E22C7N Working Principle

The Cyclone IV E FPGA consists of a two-dimensional grid of Logic Array Blocks (LABs), each containing 10 Logic Elements (LEs). Each LE contains a 4-input LUT, programmable register, carry chain, and local interconnect. During configuration, a bitstream is loaded into SRAM cells that define the LUT functions, register modes, routing, and I/O characteristics. The M9K memory blocks operate independently of the logic fabric with dedicated read/write ports. The 18×18 multipliers implement hard-wired multiplication in a single clock cycle. The PLLs multiply and phase-shift the input reference clock using a VCO with programmable dividers.

Pin Description: EP4CE15E22C7N Pin Definition and Functions
Pin Group Name Type Function
Power VCCINT Power Core voltage (1.2V)
Power VCCIO1-8 Power I/O bank voltage (1.2-3.3V)
Config CONF_DONE I/O Configuration completion indicator
Config nCONFIG Input Configuration reset (active low)
JTAG TCK/TDI/TDO/TMS I/O JTAG boundary scan and programming
GPIO IO_xxx I/O 81 user I/O pins across 8 banks
Application Scenarios: In which products and applications is EP4CE15E22C7N used
  • Industrial motor control with sensor feedback and PWM generation
  • Video and image processing with real-time DSP filter pipelines
  • Protocol bridging between legacy buses and modern interfaces
  • Communication equipment baseband processing and framing
Alternative Models: What chips are recommended as replacements for EP4CE15E22C7N
Manufacturer Part Number Package Notes
Intel EP4CE15F17C7N 256-FBGA Same die, more I/O (166)
Intel EP4CE22F17C7N 256-FBGA 22K LE device, upgrade path
Xilinx XC6SLX16-2CSG225C 225-CSG Spartan-6, 14K LE, comparable
Lattice LFXP2-5E-5TN144C 144-TQFP LatticeXP2, 5K LE, smaller

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1