Opens in a new tab

Home » Integrated Circuits ICs » EP4CE30F23I7N

EP4CE30F23I7N

Cyclone IV E FPGA, 28848 LE, 594 Kbit RAM, 66 multipliers, 4 PLLs, 328 I/O, 484-FBGA

11800

Effective Inventory

Image for reference only

Manufacturer Part:

EP4CE30F23I7N

Package:

484-FBGA (23 x 23 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EP4CE30F23I7N is a Cyclone IV E series FPGA manufactured by Intel (formerly Altera), featuring 28,848 logic elements, 594 Kbit of embedded memory, 66 embedded 18×18 multipliers, and 4 PLLs. Housed in a 484-ball FBGA package (23 mm x 23 mm), it delivers cost-optimized programmable logic for mid-density applications in communications, industrial, and consumer electronics.

Key Specifications

Logic Elements 28,848
Embedded Memory 594 Kbit (66 M9K blocks)
Embedded Multipliers (18×18) 66
PLLs 4
Maximum User I/O 328
Core Voltage 1.15 V to 1.25 V
I/O Voltage Support 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.0 V, 3.3 V
Package 484-FBGA (23 x 23 mm)
Operating Temperature -40°C to +100°C (Industrial)
Speed Grade I7
Configuration SRAM-based (external flash required)

Features

  • Cost-optimized Cyclone IV E architecture with low static power consumption
  • 66 M9K embedded memory blocks supporting dual-port RAM, ROM, and FIFO
  • 66 embedded 18×18 hardware multipliers for DSP acceleration (FIR, FFT)
  • 4 PLLs with clock multiplication, division, and phase shifting
  • Support for LVDS, RSDS, and differential SSTL I/O standards
  • On-chip termination (OCT) for signal integrity
  • Compatible with Intel Quartus Prime design software
  • Hot-socketing support and power-down mode

Applications

  • Protocol bridging and interface conversion in communication systems
  • Industrial control and automation logic acceleration
  • Automotive ADAS and infotainment signal processing
  • Medical imaging and diagnostic equipment
  • Test and measurement instruments (oscilloscopes, logic analyzers)
  • Consumer electronics multimedia processing
Product Introduction: EP4CE30F23I7N Product Introduction

The EP4CE30F23I7N is a member of the Intel Cyclone IV E FPGA family, delivering 28,848 logic elements with cost-optimized performance for mid-density applications. The device integrates 66 M9K embedded memory blocks (594 Kbit total), 66 embedded 18×18 hardware multipliers for DSP-intensive operations, and 4 phase-locked loops (PLLs) for flexible clock management. With up to 328 user I/O pins and support for multiple I/O voltage standards (1.2V to 3.3V), it offers versatile connectivity for diverse system designs. The SRAM-based configuration architecture enables in-system reprogramming, while the industrial temperature range (-40°C to +100°C) ensures reliable operation in harsh environments. Design support is provided through Intel Quartus Prime software, ModelSim simulation, and SignalTap II embedded logic analysis.

Working Principle: EP4CE30F23I7N Working Principle

The EP4CE30F23I7N operates on a SRAM-based FPGA architecture consisting of three primary subsystems: (1) Logic Array — The core fabric is organized into Logic Array Blocks (LABs), each containing 16 Logic Elements (LEs). Each LE includes a 4-input look-up table (LUT), a programmable register, and carry chain logic for efficient arithmetic implementation. (2) Embedded Memory — 66 M9K memory blocks provide dual-port SRAM that can be configured as RAM, ROM, FIFO buffers, or shift registers, each block offering 9,216 bits of storage with independent read and write ports. (3) Clock Network — A hierarchical clock structure with 4 PLLs distributes low-skew clock signals across the device. Each PLL supports clock multiplication, division, and programmable phase shifting. The device configures from external flash (EPCS/EPCQ) upon power-up, loading the SRAM configuration data to define the logic function.

Pin Description: EP4CE30F23I7N Pin Definition and Functions
Pin Group Function Voltage Description
VCCINT Core Power 1.2 V Internal logic core supply voltage
VCCIO I/O Bank Power 1.2-3.3 V Per-bank I/O supply, 8 independent banks
GND Ground 0 V Common ground reference
I/O Pins User I/O VCCIO Up to 328 general-purpose I/O with programmable standards
CLK Dedicated Clock VCCIO Global clock input pins with low-skew distribution
CONF_DONE Configuration Status VCCIO Indicates successful device configuration
nCONFIG Configuration Control VCCIO Active-low reset for device reconfiguration
DCLK Configuration Clock VCCIO Serial configuration clock input
DATA0 Configuration Data VCCIO Serial configuration data input
JTAG (TCK/TMS/TDI/TDO) Debug/Programming VCCIO IEEE 1149.1 JTAG boundary scan interface
Application Scenarios: In which products and applications is EP4CE30F23I7N used
  • Protocol bridging and data path conversion in routers, switches, and base stations
  • Industrial automation: real-time logic control, motor drive feedback loops, sensor fusion
  • Automotive: ADAS signal preprocessing, infotainment display controllers, sensor module integration
  • Medical imaging: front-end signal filtering, data acquisition, and image processing pipelines
  • Test and measurement: high-speed data capture, pattern generation, and digital logic analysis
Alternative Models: What chips are recommended as replacements for EP4CE30F23I7N
Manufacturer Part Number Package Notes
Intel/Altera EP4CE40F23I7N 484-FBGA Higher density, 39,600 LE, pin-compatible
Intel/Altera EP4CE22F17I7N 256-FBGA Lower density, 22,320 LE, smaller package
Xilinx XC6SLX25-2FTG256C 256-BGA Spartan-6, 24,051 LE, similar mid-range
Xilinx XC7A35T-1CPG236C 236-BGA Artix-7, 33,280 LE, newer architecture
Lattice LFE3-35EA-6FN484C 484-BGA ECP3, 33,000 LE, comparable density
Intel/Altera 10M30DAF484C6GES 484-BGA MAX 10, 30,208 LE, non-volatile config

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1