Opens in a new tab

EP53F8QI

1.5A PowerSoC buck converter, integrated inductor, 4MHz, 3x3mm QFN, 94% eff

4877

Effective Inventory

Image for reference only

Manufacturer Part:

EP53F8QI

Package:

QFN-16 (3.0 x 3.0 x 1.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EP53F8QI from Intel (formerly Altera/Enpirion) is a 1500mA PowerSoC synchronous buck DC-DC converter with integrated inductor in a 3x3mm 16-pin QFN package. Operating from 2.4V to 5.5V input with up to 94% efficiency and 4MHz switching frequency, it delivers an adjustable output from 0.6V to 4.96V in a total solution footprint of just 40mm2.

Key Specifications

Output Current 1500 mA (max)
Input Voltage 2.4V to 5.5V
Output Voltage 0.6V to VIN-Vdropout (adjustable)
Switching Frequency 4 MHz (fixed)
Efficiency Up to 94%
Output Ripple 8 mVp-p (typical)
Solution Footprint 40 mm2 (min)
Power OK Output Yes (open-drain)
Operating Temperature -40 to +85 C
Package 16-pin QFN (3 x 3 x 1.1 mm)

Features

  • Integrated inductor, MOSFETs, and compensation
  • Total solution footprint as small as 40mm2
  • 4MHz fixed switching frequency
  • Up to 94% efficiency
  • 8mVp-p low output ripple
  • Power OK signal with 5mA sink
  • 100% duty cycle low-dropout operation
  • UVLO, overcurrent, short circuit, and thermal protection
  • Adjustable output via external resistor divider
  • Enable pin with output discharge

Applications

  • Wireless WAN data cards
  • LDO replacement in noise-sensitive applications
  • RF, audio, video, and high-speed I/O power
  • USB, DSL, STB, DVR, DTV, and IPC
  • Computing, storage, and networking
Product Introduction: EP53F8QI Product Introduction

The EP53F8QI from Intel Enpirion is a 1500mA PowerSoC synchronous buck DC-DC converter with an integrated inductor, MOSFET switches, and compensation in a 3x3x1.1mm 16-pin QFN package. The QI suffix denotes the QFN package with industrial temperature range (-40 to +85C). By integrating the inductor, the EP53F8QI achieves a total solution footprint as small as 40mm2 with only two external capacitors and a resistor divider. The 4MHz fixed switching frequency enables small external capacitors while the integrated inductor minimizes radiated and conducted EMI, making it ideal for noise-sensitive RF and high-speed applications. The output voltage is programmed via an external resistor divider with a 0.6V reference.

Working Principle: EP53F8QI Working Principle

The EP53F8QI operates through four subsystems: (1) Integrated Power Stage: A synchronous buck converter with integrated high-side and low-side MOSFETs and a custom thin-film inductor. The 4MHz switching frequency reduces the required inductance value, enabling integration into the QFN package. (2) Voltage-Mode PWM Control: A voltage-mode pulse-width modulation controller with internal type-III compensation. The feedback voltage (VFB) is compared against a 0.6V reference. The output voltage is set by a resistor divider: VOUT = 0.6V x (1 + Ra/Rb). The upper resistor Ra should be 237kOhm for optimal loop response. (3) Power OK (POK): An open-drain output that pulls low when the output voltage falls below 90% of the set value, providing power-good status to the system. (4) Protection: Under-voltage lockout (UVLO) disables the converter when VIN drops below 2.2V. Over-current protection (OCP) limits the inductor current cycle-by-cycle. Thermal shutdown disables the converter at 155C junction temperature with 15C hysteresis.

Pin Description: EP53F8QI Pin Definition and Functions
Pin Name Type Description
1, 15, 16 NC(SW) — No connect (internal switch node). Must be soldered to PCB but not electrically connected externally.
2, 3 PGND Power Power ground. Connect to GND of input/output capacitors.
4 AVIN2 Power Analog input voltage. Connect to AVIN1 only.
5 VFB Analog Feedback pin for external voltage divider (0.6V reference).
6 NC — No connect.
7, 8 VOUT Power Output voltage and power. Connect to output capacitors.
9 AGND Power Analog ground for controller circuits.
10 AVIN1 Power Analog supply input. Connect to PVIN via 10Ohm resistor. Decouple with 1uF to AGND.
11 POK Output Power OK open-drain output (low = output below regulation).
12 ENABLE Input Enable input (high = on, low = off with output discharge).
13, 14 PVIN Power Input power supply (2.4-5.5V). Decouple with input capacitors.
Application Scenarios: In which products and applications is EP53F8QI used
  • Replacing inefficient LDOs in portable devices with up to 94% buck converter efficiency
  • RF power supply with integrated inductor minimizing radiated EMI in noise-sensitive applications
  • USB-powered device core voltage generation from 5V to 1.2V/1.8V/3.3V in 40mm2 footprint
  • High-speed I/O and FPGA core power with 8mVp-p low ripple and Power OK monitoring
Alternative Models: What chips are recommended as replacements for EP53F8QI
Model Manufacturer Iout Frequency Notes
EP53F8QI-E Intel 1.5A 4MHz Evaluation board
TPS82671SIPR TI 600mA 5.5MHz Lower current MicroSiP
LMZ10501SILR TI 1A 2MHz Nano-module
MAX38640AATD+T ADI 500mA 4MHz Smaller, lower current

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1