Opens in a new tab

EPCQ16ASI8N

16Mb FPGA config Flash, AS x1/x4, ISP, 100MHz, SOIC-8, Intel/Altera

5182

Effective Inventory

Image for reference only

Manufacturer Part:

EPCQ16ASI8N

Package:

SOIC-8 / SI-8 (4.90 x 3.90 x 1.50mm, 1.27mm pitch, 150mil body)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EPCQ16ASI8N from Intel/Altera is a 16Mb serial configuration device for FPGA programming in an 8-pin SOIC package. Operating from 2.7-3.6V, it supports Active Serial (AS) x1 and x4 configuration modes for Intel FPGAs with in-system programming (ISP) capability.

Key Specifications

Memory Density 16 Mbit (2 MB)
Memory Type Non-volatile Flash
Operating Voltage 2.7V to 3.6V
Max Clock Frequency 100 MHz
Configuration Modes AS x1, AS x4 (Active Serial)
ISP Support Yes (via JTAG through FPGA)
Erase/Program Cycles >100,000 cycles
Data Retention >20 years
Sector Organization 64KB sectors, 4KB/32KB subsectors
Quad Read Support Yes (extended quad input fast read)
Dual Read Support Yes (extended dual input fast read)
Operating Temperature -40 to +85°C (I suffix)
Package SOIC-8 (3.9mm width, SI suffix)

Features

  • 16Mb serial Flash for Intel FPGA configuration
  • Active Serial (AS) x1 and x4 modes
  • 2.7-3.6V single supply operation
  • In-system programming (ISP) via JTAG
  • Reprogrammable >100,000 erase/program cycles
  • Fast read, dual input fast read, quad input fast read
  • Write protection via status register bits
  • 4KB, 32KB, 64KB erase granularity
  • Low-cost, low-pin-count configuration solution
  • 20-year data retention minimum

Applications

  • Intel Cyclone/Arria FPGA configuration storage
  • Industrial control FPGA boot Flash
  • Communication equipment FPGA programming
  • Automotive ECU FPGA configuration
Product Introduction: EPCQ16ASI8N Product Introduction

The EPCQ16ASI8N from Intel/Altera is a 16Mb serial configuration device for FPGA programming in SOIC-8. Supports Active Serial (AS) x1 and AS x4 configuration modes for Intel Cyclone and Arria FPGAs. 2.7-3.6V operation at up to 100MHz clock. ISP via JTAG through the FPGA. >100K erase cycles with >20 year retention. A suffix denotes 64KB sectors, S suffix denotes standard security, I suffix denotes -40 to 85°C industrial temperature, 8 suffix denotes pin config option 8 (RESET# and HOLD#), N suffix denotes SOIC-8 package. Ideal for Intel FPGA configuration storage.

Working Principle: EPCQ16ASI8N Working Principle

The EPCQ16A stores the FPGA configuration bitstream in non-volatile Flash memory. During power-up, the Intel FPGA initiates configuration by driving the AS interface — the FPGA acts as the master, providing clock (DCLK) and reading data from the EPCQ. In AS x1 mode, 1 bit per clock is read; in AS x4 mode, 4 bits per clock are read for 4x faster configuration. The EPCQ also supports ISP: the FPGA can reprogram the EPCQ through the JTAG interface using Intel’s Quartus Programmer software. The write-protection feature uses status register bits (BP[3:0] and TB) to define protected sectors, preventing accidental corruption of critical configuration data. The 4KB subsector erase allows efficient partial updates without erasing the entire device.

Pin Description: EPCQ16ASI8N Pin Definition and Functions
Pin Name Type Function
1 S# (Chip Select) Input Chip select (active low, from FPGA nCSO)
2 DATA[1] I/O Serial data output / DATA1 in quad mode
3 DATA[2] I/O DATA2 in quad mode / HOLD# function
4 VSS (Ground) Ground Ground
5 DATA[0] I/O Serial data input/output / DATA0 in quad mode
6 DCLK Input Serial clock (from FPGA)
7 DATA[3] I/O DATA3 in quad mode / RESET# function
8 VCC (Supply) Power Supply voltage (2.7-3.6V)
Application Scenarios: In which products and applications is EPCQ16ASI8N used
  • Cyclone V FPGA AS x4 configuration with 16Mb EPCQ at 100MHz
  • Industrial Cyclone 10 LP FPGA boot storage with ISP update
  • Arria 10 GX partial reconfiguration data storage
  • Automotive Cyclone V SoC FPGA configuration with write protection
Alternative Models: What chips are recommended as replacements for EPCQ16ASI8N
Manufacturer Part Number Package Notes
Intel/Altera EPCQ32ASI8N SOIC-8 32Mb, pin-compatible density upgrade
Intel/Altera EPCQ16ASI8 SOIC-8 Same device, tube packaging
Micron MT25QL128ABA1EW7-0SIT W-PDFN-8 128Mb SPI NOR Flash (generic alternative)

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1