Opens in a new tab

EQY-10-63+

Mini-Circuits MMIC gain equalizer, DC~6GHz, 11.2dB slope, GaAs IPD, MCLP-8 2x2mm

14991

Effective Inventory

Image for reference only

Manufacturer Part:

EQY-10-63+

Package:

MCLP-8 (2mm x 2mm, 0.5mm pitch)

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The EQY-10-63+ from Mini-Circuits is a high-slope MMIC gain equalizer with 11.2dB negative attenuation slope across DC to 6GHz. Using the same GaAs IPD MMIC technology and MCLP-8 (2mm x 2mm) package as the EQY-3-63+, this device compensates for more aggressive gain roll-off in wideband amplifiers and multi-stage receiver chains.

Key Specifications

Type Absorptive gain equalizer (GaAs IPD MMIC)
Frequency Range DC ~ 6GHz
Nominal Slope 11.2dB
Insertion Loss 11.2dB @ DC, 4.9dB @ 3GHz, 1.0dB @ 6GHz
VSWR 1.06:1 @ DC-1GHz, 1.12:1 @ 6GHz
RF Input Power +31dBm max
Operating Temperature -40C ~ +85C
Package MCLP-8 (2mm x 2mm)

Features

  • 11.2dB negative slope for compensating aggressive amplifier roll-off
  • Absorptive design with excellent VSWR (1.12:1 max)
  • Ultra-wideband DC to 6GHz coverage
  • Same compact 2mm x 2mm MCLP-8 footprint as EQY-3-63+
  • +31dBm power handling for transmitter path applications

Applications

  • Multi-stage amplifier chain gain flattening
  • Wideband receiver slope compensation
  • Distributed amplifier gain equalization
  • Satellite communication transponder linearization
  • Electronic warfare and SIGINT receiver chains
Product Introduction: EQY-10-63+ Product Introduction

The EQY-10-63+ from Mini-Circuits is a high-slope MMIC gain equalizer that provides 11.2dB of negative attenuation slope across its DC to 6GHz operating range. The insertion loss varies from 11.2dB at DC down to just 1.0dB at 6GHz, making it suitable for compensating the gain roll-off of multi-stage amplifier chains where the cumulative slope can exceed 10dB. Like the EQY-3-63+, this device uses GaAs IPD MMIC technology and comes in the same compact MCLP-8 (2mm x 2mm) package, allowing designers to easily swap between different slope values on the same PCB footprint. The absorptive topology ensures excellent VSWR of better than 1.12:1 across the entire frequency range, preventing reflections that could destabilize preceding amplifier stages. The device can handle up to +31dBm of RF input power, enabling use in both receiver and transmitter signal paths.

Working Principle: EQY-10-63+ Working Principle

The EQY-10-63+ uses the same passive GaAs IPD MMIC technology as the EQY-3-63+ but with a more aggressive LC network design that produces an 11.2dB attenuation difference between DC and 6GHz. At DC and low frequencies, the network presents maximum attenuation (11.2dB), and the attenuation progressively decreases with frequency, reaching only 1.0dB at 6GHz. This steeper slope is achieved through additional resonant elements in the MMIC structure. When placed in series with a wideband amplifier chain that exhibits a positive gain slope (more gain at low frequencies, less at high frequencies), the combined response is flattened. The absorptive design uses on-chip resistors to convert the reflected energy into heat rather than returning it to the source, maintaining a well-matched impedance at both RF-IN and RF-OUT ports across the full bandwidth.

Pin Description: EQY-10-63+ Pin Definition and Functions
Pad Name Function
1 GND Ground
2 RF-IN RF Input
3 NC External Ground (optional)
4 GND Ground
5 NC External Ground (optional)
6 NC External Ground (optional)
7 RF-OUT RF Output
8 GND Ground
Paddle GND Ground (bottom thermal pad)
Application Scenarios: In which products and applications is EQY-10-63+ used
  • Multi-stage amplifier chains: Compensate the cumulative gain roll-off of 3+ cascaded LNAs or gain blocks with 11.2dB slope correction
  • Distributed amplifier equalization: Flatten the intrinsic gain tilt of distributed/traveling-wave amplifiers across multi-octave bandwidths
  • Satellite transponders: Equalize the frequency-dependent gain of C/Ku/Ka-band transponder chains for uniform EIRP
  • EW receivers: Maintain flat gain in wideband SIGINT and ELINT receiver front-ends for accurate signal parameter measurement
  • Test and measurement: Calibrate signal analyzer or network analyzer front-ends for flat amplitude response across the operating band
Alternative Models: What chips are recommended as replacements for EQY-10-63+
Model Brand Slope Freq Range Package
EQY-3-63+ Mini-Circuits 3.2dB DC~6GHz MCLP-8
EQY-6-63+ Mini-Circuits 6dB DC~6GHz MCLP-8
EQY-20-63+ Mini-Circuits 20dB DC~6GHz MCLP-8
BFG-10+ Mini-Circuits 10dB DC~6GHz connector
EQY-2-45+ Mini-Circuits 2dB DC~4.5GHz MCLP-8

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1