Opens in a new tab

ESD5B5.0ST1G

5V unidirectional TVS diode, 350W, SOD-523

13411

Effective Inventory

Image for reference only

Manufacturer Part:

ESD5B5.0ST1G

Package:

SOD-523 (1.6×0.8mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ESD5B5.0ST1G from onsemi is a 5V 350W unidirectional TVS diode in ultra-small SOD-523 for ESD protection of low-voltage signal lines.

Key Specifications

Package SOD-523 (1.6×0.8mm)

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
Product Introduction: ESD5B5.0ST1G Product Introduction

The ESD5B5.0ST1G from onsemi is a 5V 350W unidirectional TVS diode in ultra-small SOD-523 for ESD protection of low-voltage signal lines.

Working Principle: ESD5B5.0ST1G Working Principle

The ESD5B5.0ST1G is a 5V unidirectional TVS (Transient Voltage Suppressor) diode from onsemi in SOD-523 (1.2×0.8mm), designed for ESD protection of high-speed data lines. It uses a zener-based clamp structure: under normal operation (0-5V), the diode presents very low leakage current (<1uA at 5V) and low capacitance (70pF typical). When an ESD strike occurs (up to +/-8kV contact per IEC 61000-4-2), the TVS diode avalanches and clamps the voltage to a safe level. The clamping voltage at 8kV ESD (30A peak) is typically 9.8V, low enough to protect 5V CMOS inputs. The unidirectional configuration means the diode only clamps positive transients to the GND rail (and negative transients are clamped by the forward diode to -0.8V). Bidirectional versions clamp both polarities symmetrically. The 70pF capacitance is low enough for data rates up to approximately 50Mbps (e.g., RS-485, CAN) but too high for high-speed interfaces like USB 3.0 or HDMI, which require <1pF. The SOD-523 package has parasitic inductance of approximately 0.5nH, contributing to approximately 3V overshoot during fast ESD rise times (0.7-1ns). For better protection, place the TVS as close as possible to the connector.

Pin Description: ESD5B5.0ST1G Pin Definition and Functions
Pin Name Type Function
1 I/O I/O Protected line (bidirectional ESD clamp)
2 GND Power Ground (ESD discharge path)
Application Scenarios: In which products and applications is ESD5B5.0ST1G used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Power management
  • Alternative Models: What chips are recommended as replacements for ESD5B5.0ST1G
    Manufacturer Part Number Package Notes
    onsemi ESD5B5.0ST1G SOD-523 Same device, onsemi label
    Nexperia PESD5V0S1BA,115 SOD-323 5V TVS, larger footprint
    Vishay GSOT05C-E3-08 SOT-23 5V bidirectional TVS
    Littelfuse PGB1010603MR 0402 5V polymer ESD suppressor
    TI TPD1E10B06DPYR SOD-923 10V unidirectional ESD, 0.4pF

    Recommend Parts

    IRFS4310ZTRLPBF

    IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

    Brand: infineon

    Package: D2PAK (TO-263AB)

    IN STOCK: 11137pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    MSASJ105BB5475MFNA01

    4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

    Brand: gigadevice

    Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

    IN STOCK: 9701pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRF3415PBF

    150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 2940pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    105017-1001

    USB Type-C receptacle connector, 24-pin, SMD

    Brand: Amphenol

    Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

    IN STOCK: 5335pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    IRLB3034PBF

    IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

    Brand: infineon

    Package: TO-220AB

    IN STOCK: 9724pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    XC6SLX75-2FGG484I

    Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

    Brand: xilinx

    Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

    IN STOCK: 890pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1