Opens in a new tab

ESDA6V1BC6

Quad bidirectional ESD protection, 5V standoff, 6.1V VBR, 20pF, 15kV air/8kV contact, SOT-23-6

14500

Effective Inventory

Image for reference only

Manufacturer Part:

ESDA6V1BC6

Package:

SOT-23-6L

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ESDA6V1BC6 from STMicroelectronics is a quad bidirectional Transil ESD protection array in a SOT-23-6L package. It protects up to 4 data lines against electrostatic discharge up to 15 kV (air) and 8 kV (contact) with 5V stand-off voltage, 6.1V minimum breakdown, and low 1 µA leakage current per line.

Key Specifications

  • Configuration: 4 bidirectional Transil functions
  • Stand-off Voltage (VRM): 5V (±5V bidirectional)
  • Breakdown Voltage (VBR): 6.1V min, 8V max @ 1 mA
  • Clamping Voltage (VCL): 1.35V typ above stand-off @ IPP=3A
  • Leakage Current (IRM): 1 µA max @ VRM
  • Capacitance: 20 pF typ @ 0V bias, 1 MHz
  • Dynamic Resistance: 3Ω typical
  • Peak Pulse Power: 80W (8/20µs waveform)
  • ESD Protection: 25 kV (MIL-883), 15 kV (IEC air), 8 kV (IEC contact)
  • Channel Separation: 80 dB typ @ 20 kHz
  • Operating Temperature: -40°C ~ 125°C
  • Package: SOT-23-6L
  • Marking: BS55

Features

  • Protects up to 4 lines with a single SOT-23-6L package
  • Bidirectional protection for symmetrical signals
  • Very low leakage current (<1 µA) for sensitive circuits
  • High ESD protection level up to 25 kV
  • IEC 61000-4-2 Level 4 compliant
  • Low capacitance (20 pF) for high-speed data lines
  • ECOPACK2 compliant (RoHS)

Applications

  • USB and HDMI port ESD protection
  • RS-232 / RS-485 transceiver protection
  • Keypad and button interface protection
  • VCC bus ESD clamping
  • General-purpose I/O pin protection
Product Introduction: ESDA6V1BC6 Product Introduction

The ESDA6V1BC6 from STMicroelectronics is a monolithic quad bidirectional Transil ESD protection array that protects up to four signal lines from electrostatic discharge events in a tiny SOT-23-6L package. The bidirectional configuration is specifically designed for symmetrical signals that swing both above and below ground, such as RS-232, audio, and sensor interfaces. The 5V stand-off voltage accommodates 3.3V and 5V logic levels with margin. The low 20 pF line capacitance ensures minimal signal degradation on high-speed data lines. The device complies with IEC 61000-4-2 Level 4 (8 kV contact, 15 kV air discharge) and MIL-STD-883 Method 3015-6 Class 3 (25 kV HBM), providing industrial-grade ESD protection. The BS55 marking identifies the device on assembled PCBs.

Working Principle: ESDA6V1BC6 Working Principle

The ESDA6V1BC6 uses STMicroelectronics’ Transil (transient voltage suppression) technology, where each protection element is a bidirectional avalanche diode. Under normal operating conditions (voltage within ±5V), the diodes present high impedance (>1 MΩ) and low capacitance (20 pF), appearing transparent to the protected signal. When an ESD event drives the line voltage above the breakdown voltage (6.1V minimum), the avalanche diode conducts, clamping the voltage to a safe level determined by the dynamic resistance (3Ω) and the peak current. For an 8 kV IEC contact discharge, the peak current can reach approximately 20A, resulting in a clamping voltage of about VBR + IPP × Rd = 6.1 + 20 × 3 = 66.1V peak, which is within the tolerance of most IC input structures. The bidirectional design provides identical protection for both positive and negative transients.

Pin Description: ESDA6V1BC6 Pin Definition and Functions
Pin Name Function
1 Line 1 Protected line 1
2 GND Ground reference
3 Line 2 Protected line 2
4 Line 3 Protected line 3
5 Line 4 Protected line 4
6 GND Ground reference
Application Scenarios: In which products and applications is ESDA6V1BC6 used

The ESDA6V1BC6 is ideal for protecting USB 2.0 data lines (D+/D-) and VBUS from cable discharge events. For RS-232 interfaces, the bidirectional protection handles both the positive and negative voltage swings of the RS-232 signal. In keypad and button interfaces, the device prevents ESD entry through exposed connectors. On VCC power lines, it clamps supply transients that could damage downstream ICs. The 20 pF capacitance is low enough to avoid signal integrity issues on data rates up to approximately 50 Mbps, making it suitable for SPI and I2C bus protection.

Alternative Models: What chips are recommended as replacements for ESDA6V1BC6
Model Manufacturer Key Difference
ESDA7V0-4BC6 STMicroelectronics 7V standoff for 5V tolerant lines
PRTR5V0U2X Nexperia Dual unidirectional, 5V standoff, SOT-143
TUSB522P Texas Instruments Quad unidirectional, 5.5V, SOT-23-6

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1