Opens in a new tab

Home » Capacitors » F612JF104K100L

F612JF104K100L

KEMET 0.1µF 100V F612 metallized polyester stacked film capacitor, ±10%, radial lead 5mm, -55 to +105°C

10520

Effective Inventory

Image for reference only

Manufacturer Part:

F612JF104K100L

Package:

Radial Lead, 5mm pitch (7.2 x 6.5 x 2.5mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The F612JF104K100L from KEMET is a 0.1µF 100V DC metallized polyester (MKT) stacked film capacitor with radial leads. The F612 series uses stacked metallized polyester film construction for DC and low-frequency AC applications requiring stable capacitance, low dissipation factor, and high insulation resistance. This capacitor is commonly used in analog signal coupling, timing circuits, and general-purpose DC applications.

Key Specifications

Manufacturer KEMET (YAGEO Group)
Capacitance 0.1 µF (100 nF)
Voltage Rating 100V DC
Dielectric Metallized Polyester (MKT)
Tolerance ±10% (K)
Dissipation Factor ≤ 0.8% @ 1kHz, ≤ 1.2% @ 10kHz
Insulation Resistance ≥ 15 GΩ
Max dV/dt 200 V/µs
Inductance 6 nH (typical)
Operating Temperature -55°C to +105°C (derated above +85°C)
Package Radial Lead, 5mm lead spacing, 7.2 x 6.5 x 2.5mm
RoHS Compliant

Features

  • 0.1µF 100V metallized polyester film capacitor
  • F612 series MKT stacked film construction
  • ±10% capacitance tolerance
  • Low dissipation factor (≤ 0.8% @ 1kHz)
  • High insulation resistance (≥ 15 GΩ)
  • Self-healing metallized film technology
  • Radial lead, 5mm pitch for through-hole mounting
  • RoHS compliant

Applications

  • Analog signal coupling and DC blocking
  • RC timing circuits and oscillators
  • Active filter networks
  • Snubber circuits for low-power switching
  • General-purpose DC applications
Product Introduction: F612JF104K100L Product Introduction

The F612JF104K100L from KEMET is a 0.1µF 100V DC metallized polyester (MKT) stacked film capacitor with radial leads on 5mm pitch. The F612 series uses a stacked construction where multiple metallized polyester film layers are pressed together and encapsulated, providing a compact through-hole film capacitor with excellent electrical characteristics. The metallized polyester dielectric offers a good balance of dielectric constant (εr ≈ 3.3), dissipation factor, and cost for general-purpose DC and low-frequency AC applications. The self-healing property of metallized film ensures that any localized dielectric breakdown is cleared by the evaporation of the thin metal layer around the fault, isolating the defect and maintaining capacitor functionality.

Working Principle: F612JF104K100L Working Principle

The F612JF104K100L operates as a metallized polyester film capacitor using the self-healing mechanism inherent to metallized film construction. The polyester (polyethylene terephthalate, PET) dielectric film is approximately 3-5µm thick, with a thin aluminum or zinc metallization (20-50nm) vacuum-deposited on one surface. When a dielectric defect or overvoltage event causes a localized breakdown, the arc current rapidly heats and evaporates the thin metallization in a small zone around the breakdown point (typically 1-3mm diameter), clearing the short circuit and restoring the capacitor’s insulation. This self-healing process produces a small, brief voltage transient but does not significantly affect the overall capacitance or performance of the capacitor. The stacked construction provides lower inductance (6nH typical) compared to wound film capacitors, making the F612 suitable for higher-frequency applications.

Pin Description: F612JF104K100L Pin Definition and Functions
Pin Name Type Function
1 Lead 1 Passive One electrode; non-polar, either lead can be positive
2 Lead 2 Passive Other electrode; 5mm lead spacing from Lead 1
Application Scenarios: In which products and applications is F612JF104K100L used
  • Signal Coupling: AC coupling between analog circuit stages where film capacitor stability and low distortion are preferred over ceramic alternatives.
  • RC Timing: Precision RC timing circuits where the stable 0.1µF value and low dissipation factor ensure timing accuracy.
  • Active Filters: Sallen-Key and multiple-feedback active filter networks where polyester’s predictable characteristics enable accurate filter response.
  • Snubber: Low-power snubber networks for relay and switch contact protection where 100V rating provides margin.
Alternative Models: What chips are recommended as replacements for F612JF104K100L
Manufacturer Part Number Cap Volt Notes
WIMA MKS2C041001F00KSSD 0.1µF 100V Polyester film equivalent
EPCOS B32529C3104K 0.1µF 100V PET film equivalent
KEMET F612JF104K63L 0.1µF 63V Lower voltage alternative
Panasonic ECQ-E2104KF 0.1µF 100V Mylar film equivalent

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1