Opens in a new tab

FDMC2523P

P-ch MOSFET, -60V, -6A, 120mOhm @-10V, Power56 DPAK-5

12662

Effective Inventory

Image for reference only

Manufacturer Part:

FDMC2523P

Package:

Power56 / DPAK-5 (6.5 x 5.0 x 2.3 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The FDMC2523P is a P-channel enhancement mode power trench MOSFET from onsemi with -60V VDSS, -6A ID, and 120 mΩ RDS(ON) max at VGS=-10V in a compact Power56 (DPAK-5) surface-mount package.

Key Specifications

Channel Type P-Channel Enhancement
Drain-Source Voltage (VDSS) -60 V
Continuous Drain Current -6 A (at TC=25°C)
RDS(ON) max 120 mΩ @ VGS=-10V
RDS(ON) max 180 mΩ @ VGS=-4.5V
Gate Threshold Voltage -1.0 V to -2.5 V
Total Gate Charge 12 nC typical
Power Dissipation 2.5 W (at TA=25°C)
Operating Temperature -55°C to +150°C (Tj)
Package Power56 / DPAK-5

Features

  • P-channel power trench MOSFET
  • Low RDS(ON): 120 mΩ @ VGS=-10V
  • 60V drain-source voltage rating
  • 6A continuous drain current
  • Low gate charge: 12 nC typical
  • Compact Power56 (DPAK-5) surface-mount package
  • Logic-level gate drive compatible
  • 100% avalanche tested

Applications

  • Load switches and power management
  • Battery protection circuits
  • Reverse polarity protection
  • DC-DC converters (high-side switch)
  • Motor and solenoid drives
Product Introduction: FDMC2523P Product Introduction

The FDMC2523P is a P-channel enhancement mode power trench MOSFET from onsemi designed for low-voltage power management applications. Using trench technology, it achieves low on-resistance of 120 mΩ at VGS=-10V while maintaining low gate charge of 12 nC for efficient switching. The -60V drain-source rating and -6A continuous current make it suitable for high-side load switching, battery protection, and DC-DC converter applications. The compact Power56 (DPAK-5) package provides good thermal performance in a surface-mount footprint. Logic-level gate drive capability allows direct drive from 3.3V or 5V microcontroller GPIO pins.

Working Principle: FDMC2523P Working Principle

The FDMC2523P is a P-channel MOSFET where current flows from source to drain when the gate voltage is pulled below the source (negative VGS). The trench MOSFET structure uses vertical trenches etched into the silicon with gate oxide and polysilicon filling, creating a channel on the trench sidewalls. This provides higher cell density and lower RDS(ON) than planar structures. When VGS exceeds the threshold (more negative than -1.0V to -2.5V), an inversion layer forms along the trench sidewalls, connecting the P+ source to the P-epi drain region and allowing current flow. The low gate charge (12 nC) minimizes the energy required to switch the device, reducing driver power dissipation. As a P-channel device, it can be used as a high-side switch without the charge pump or bootstrap circuit required by N-channel MOSFETs.

Pin Description: FDMC2523P Pin Definition and Functions
Pin Name Type Description
1 Source Power Source terminal (connected to VIN in high-side config)
2 Drain Power Drain terminal (connected to load)
3 Gate Input Gate control terminal
4 Source Power Source terminal (mirror)
5 Drain Power Drain terminal (mirror)
Tab Drain Power Thermal pad connected to drain
Application Scenarios: In which products and applications is FDMC2523P used
  • High-Side Load Switch: P-channel eliminates charge pump; 120 mΩ RDS(ON) minimizes voltage drop at 6A loads
  • Battery Protection: -60V rating provides margin for 48V battery systems; low RDS(ON) extends battery life
  • Reverse Polarity Protection: Gate tied to ground, source to supply — blocks reverse current automatically
  • DC-DC Converters: Low gate charge (12 nC) enables efficient high-frequency buck/boost switching
  • Power Routing: Logic-level gate drive from 4.5V MCU GPIO for battery-powered power path management
Alternative Models: What chips are recommended as replacements for FDMC2523P
Model Manufacturer Key Difference Package Specs
FDMC2583P onsemi -60V, -8.2A, 78 mΩ, higher current – –
FDS6575 onsemi -30V, -12A, 18 mΩ, lower voltage – –
IRF9Z34NPBF Infineon -60V, -5.5A, 140 mΩ, DPAK-3 – –
SI2333DS-T1-GE3 Vishay -30V, -4.1A, 38 mΩ, SOT-23 – –
AOD4185 Alpha & Omega -40V, -10A, 28 mΩ, DPAK – –

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1