Opens in a new tab

FNEPON125

125VAC 5A fuse holder, PCB mount

6554

Effective Inventory

Image for reference only

Manufacturer Part:

FNEPON125

Package:

PCB mount

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The FNEPON125 is a PCB-mount fuse holder designed for 125VAC 5A fuses in 5x20mm form factor for circuit protection in electronic equipment.

Key Specifications

Package PCB mount

Features

  • See datasheet for complete specifications
  • Industry-standard package

Applications

  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
Product Introduction: FNEPON125 Product Introduction

The FNEPON125 is a PCB-mount fuse holder designed for 125VAC 5A fuses in 5x20mm form factor for circuit protection in electronic equipment.

Working Principle: FNEPON125 Working Principle

The FNEPON125 is a 125VAC 5A PCB-mount fuse holder from Schurter, designed for 5x20mm cartridge fuses. The fuse holder provides a safe and convenient way to install and replace fuses on a PCB without soldering. The holder consists of: (1) Two tin-plated brass contacts that grip the fuse end caps; (2) A UL94V-0 rated PBT housing that contains any arc or debris during fuse blowing; (3) Through-hole mounting tabs for PCB attachment. The 125VAC rating matches the voltage rating of standard 5x20mm fuses for North American mains (120VAC nominal). The 5A current rating refers to the maximum fuse rating that can be installed (the holder itself can carry 10A continuously). The insertion force is 8N typical, and the withdrawal force is 5N minimum (ensuring the fuse stays in place during vibration). The contact resistance is less than 10m-ohm. The dielectric strength is 1500Vrms between line and load (with fuse removed). The operating temperature range is -40C to +85C. The -FNEPON125 part number encodes: FN = fuse holder series, EP = open design (no cover), ON = without indicator, 125 = 125V rating. Applications include: power supply input protection, transformer primary protection, and IEC 60950 safety compliance in consumer electronics.

Pin Description: FNEPON125 Pin Definition and Functions
Pin Name Type Function
1 Line Passive Line terminal (connects to fuse link, receives power from source)
2 Load Passive Load terminal (connects to fuse link, delivers power to circuit)
Application Scenarios: In which products and applications is FNEPON125 used
  • Industrial control
  • Consumer electronics
  • Communication equipment
  • Automotive electronics
  • Alternative Models: What chips are recommended as replacements for FNEPON125
    Manufacturer Part Number Package Notes
    Schurter FNEPON125 PCB mount Same device, Schurter brand
    Schurter FNEPON250 PCB mount 250VAC version, higher voltage rating
    Littelfuse 0561005 PCB mount 5A 125VAC fuse holder, Littelfuse brand
    Bussmann BK/PCB5 PCB mount 5A 250VAC fuse holder, Bussmann brand
    Bel Fuse 5ST102 PCB mount 10A 250VAC fuse holder, Bel Fuse brand

    Recommend Parts

    RK73H1ETTP20R0F

    20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

    Brand: KOA Speer

    Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

    IN STOCK: 33180pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS77001DBVR

    50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

    Brand: TI

    Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

    IN STOCK: 5000pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    TPS61021ADSGR

    3A synchronous boost converter, 1.8-5.5V, VSSOP-8

    Brand: TI

    Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

    IN STOCK: 12398pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    S1MB-13-F

    1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

    Brand: Diodes Inc

    Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

    IN STOCK: 3679pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADUM5000ARWZ-RL

    500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

    Brand: ADI

    Package: SOIC-16W (10.3 x 7.5 mm, RW package)

    IN STOCK: 6373pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1

    ADS830E/2K5

    8-bit 60MSPS high-speed ADC, TSSOP-24

    Brand: TI

    Package: TSSOP-24 (7.8 x 4.4 mm)

    IN STOCK: 9357pcs

    Cargo cycle: 3-7 Days

    The minimum order is 1