Opens in a new tab

Home » Integrated Circuits ICs » FQD8N80TM

FQD8N80TM

800V 3.5A N-ch MOSFET, 3.6Ohm, DPAK, QFET planar DMOS, 19nC Qg, 100% avalanche

11648

Effective Inventory

Image for reference only

Manufacturer Part:

FQD8N80TM

Package:

DPAK / TO-252-3 (6.60 x 6.10 x 2.30 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The FQD8N80TM from onsemi is an 800V, 3.5A N-channel QFET power MOSFET in a DPAK (TO-252) package. Using planar stripe DMOS technology, it provides low on-resistance and superior switching performance for SMPS, PFC, and motor drive applications.

Key Specifications

VDS 800 V
ID (continuous) 3.5 A at Tc=25C
RDS(on) Max 3.6 Ohm at VGS=10V
Gate Charge 19 nC typical at 10V
Input Capacitance 680 pF typical
Avalanche Energy 460 mJ single pulse
Power Dissipation 3.13W (Ta), 100W (Tc)
Operating Temperature -55C to +150C

Features

  • 800V/3.5A N-channel MOSFET in DPAK surface-mount package
  • 3.6 Ohm max RDS(on) at 10V gate drive for low conduction losses
  • 19nC typical gate charge for fast and efficient switching
  • Planar stripe DMOS technology with 100% avalanche tested
  • Low Crss of 8.6pF typical for reduced Miller effect
  • Suitable for off-line SMPS, PFC pre-regulators, and motor drives

Applications

  • Switch-mode power supply primary-side switching at 800V
  • Active power factor correction (PFC) boost converter
Product Introduction: FQD8N80TM Product Introduction

The FQD8N80TM from onsemi is an 800V, 3.5A N-channel enhancement mode power MOSFET in a DPAK (TO-252) surface-mount package. The device is produced using onsemi proprietary planar stripe and DMOS technology, which has been especially tailored to reduce on-state resistance and provide superior switching performance with high avalanche energy strength. The 3.6 Ohm maximum RDS(on) at VGS=10V and 19nC typical total gate charge provide an excellent balance between conduction loss and switching loss for moderate-frequency power conversion applications. The low Crss of 8.6pF typical minimizes the Miller effect, reducing the risk of parasitic turn-on during high dV/dt switching transitions. The device is 100% avalanche tested, ensuring reliable operation under inductive load conditions where voltage spikes may exceed the rated VDS. The DPAK package provides surface-mount convenience with adequate thermal performance through the exposed drain tab, supporting up to 100W power dissipation when properly heatsinked. The FQD8N80TM is well-suited for off-line switch-mode power supplies, active PFC boost converters, and other high-voltage switching applications.

Working Principle: FQD8N80TM Working Principle

The FQD8N80TM is a vertical DMOS N-channel enhancement mode power MOSFET. (1) DMOS Structure: The planar stripe DMOS technology uses vertical current flow from source to drain through thousands of parallel MOSFET cells. Each cell has a gate oxide over the P-body region. When VGS exceeds the threshold (3.0-5.0V), an N-type inversion layer forms at the oxide-semiconductor interface, creating a conductive channel from source to drain. (2) Voltage Blocking: When VGS=0V, the P-body/N-drift junction blocks current flow. The 800V rating is achieved through a lightly-doped N-drift region that supports the high electric field during the off-state. (3) On-State Conduction: When the channel is formed, current flows from source through the channel, across the JFET region between adjacent P-bodies, through the N-drift region, and out the drain. The RDS(on) of 3.6 Ohm max includes the channel resistance, JFET resistance, drift region resistance, and substrate resistance. (4) Avalanche: When the drain voltage exceeds the breakdown voltage, the device enters avalanche mode. The current flows through the P-body/N-drift junction in breakdown. The 460mJ single-pulse avalanche energy rating indicates the device can absorb significant energy during inductive turn-off transients.

Pin Description: FQD8N80TM Pin Definition and Functions
Pin Name Function
1 Gate Gate terminal (input)
2 Drain Drain terminal (exposed tab)
3 Source Source terminal
Application Scenarios: In which products and applications is FQD8N80TM used
  • Switch-mode power supply primary-side switching at 800V in DPAK
  • Active power factor correction (PFC) boost converter at 3.5A
Alternative Models: What chips are recommended as replacements for FQD8N80TM
Manufacturer Part Number Package Notes
onsemi FQB8N80TM TO-220 Through-hole version
onsemi FQD4N80TM DPAK 1.9A, lower current
Infineon SPW11N80C3 TO-247 11A, CoolMOS
onsemi FCPF850N80Z TO-220FP 8A, SuperFET II

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1