Opens in a new tab

FSUSB63UMX

onsemi 3:1 USB 2.0 HS switch, 830MHz BW, 6 ohm RON, UMLP-12 1.8×1.8mm, sub-1uA sleep

3679

Effective Inventory

Image for reference only

Manufacturer Part:

FSUSB63UMX

Package:

UMLP-12 (1.80mm x 1.80mm x 0.55mm, 0.40mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The FSUSB63UMX from onsemi is a low-power 3:1 USB 2.0 high-speed switch/multiplexer in a tiny 1.80mm x 1.80mm UMLP-12 package. Supporting USB 2.0 480Mbps signaling with 830MHz bandwidth and only 6-ohm typical on-resistance, it enables USB port sharing and multiplexing in smartphones, tablets, and dock stations.

Key Specifications

Topology 3:1 USB Switch / SP3T Multiplexer
USB Compliance USB 2.0 High-Speed (480Mbps) and Full-Speed
Bandwidth 830MHz (-3dB)
On-Resistance (RON) 6 ohm typical, 7.8 ohm max
On-Capacitance (CON) 6pF typical
Supply Voltage 2.7V ~ 4.4V
Active Current 7.5uA typical
Sleep Current <1uA
Break-Before-Make 126us
Package UMLP-12 (1.80mm x 1.80mm, 0.40mm pitch)

Features

  • 3:1 multiplexer supports three USB source ports to one common port
  • 830MHz bandwidth for USB 2.0 480Mbps high-speed compliance
  • Ultra-low 6-ohm on-resistance with 1-ohm flatness
  • Break-before-make switching prevents bus contention
  • Sub-1uA sleep mode for mobile power saving
  • Compact 1.8mm x 1.8mm UMLP package for space-constrained designs

Applications

  • Smartphone USB port multiplexing
  • Tablet and laptop USB switching
  • Docking station USB routing
  • USB OTG port sharing
  • Digital camera data path switching
Product Introduction: FSUSB63UMX Product Introduction

The FSUSB63UMX from onsemi is a 3:1 USB 2.0 high-speed switch and multiplexer designed for routing USB D+/D- differential signals between one common port and three selectable source ports. The device supports USB 2.0 high-speed (480Mbps) and full-speed (12Mbps) signaling with 830MHz of -3dB bandwidth and low on-resistance of 6 ohm typical. The two-bit select input (SEL[1:0]) chooses among the three USB ports or places the device in sleep mode, with break-before-make timing of 126us to prevent momentary bus contention. The ultra-compact UMLP-12 package (1.80mm x 1.80mm) makes the FSUSB63UMX ideal for smartphones, tablets, and other portable devices where PCB real estate is extremely limited. The device draws only 7.5uA in active mode and less than 1uA in sleep mode, minimizing battery drain.

Working Principle: FSUSB63UMX Working Principle

The FSUSB63UMX uses a 3:1 SP3T (single-pole, triple-throw) analog switch architecture to connect the common D+/D- USB port to one of three source port pairs. The SEL[1:0] control pins select the active port: 00 = sleep mode (all switches open), 01 = Port 1, 10 = Port 2, 11 = Port 3. When switching between ports, the break-before-make logic ensures the previously active path is disconnected for 126us before the new path is connected, preventing USB signal contention. The low 6-ohm on-resistance and 6pF on-capacitance are critical for meeting USB 2.0 high-speed eye diagram requirements. The device is powered from a 2.7V to 4.4V supply, compatible with Li-Ion battery voltages and 3.3V rails. The sleep mode disables all signal paths and reduces current to below 1uA.

Pin Description: FSUSB63UMX Pin Definition and Functions
Pin Name Function
1 D+ USB D+ Common Port
2 D- USB D- Common Port
3 GND Ground
4 SEL[0] Port Select Input 0
5 HSD1- Port 1 D-
6 HSD1+ Port 1 D+
7 HSD2- Port 2 D-
8 HSD2+ Port 2 D+
9 HSD3- Port 3 D-
10 HSD3+ Port 3 D+
11 SEL[1] Port Select Input 1
12 VCC Power Supply
Application Scenarios: In which products and applications is FSUSB63UMX used
  • Smartphone USB mux: Route USB data between device MCU, accessory dock, and USB-C connector using a single FSUSB63
  • Tablet/laptop switching: Select between internal USB device and external dock USB host port with break-before-make safety
  • Docking stations: Connect multiple USB peripherals to a single host port through software-controlled switching
  • USB OTG port sharing: Alternate between host and device roles on a shared USB connector
  • Digital cameras: Switch USB data path between internal storage controller and external PC connection
Alternative Models: What chips are recommended as replacements for FSUSB63UMX
Model Brand Topology BW Package
FSUSB30UMX onsemi 2:1 DPDT 900MHz UMLP-10
TS3USB221A TI 2:1 DPDT 900MHz WCSP-12
FSUSB42UMX onsemi 2:1 DPDT 800MHz UMLP-10
CBTL06GP213 NXP 2:1 7GHz HWQFN-20
HD3SS3212 TI 2:1 USB 3.0 7.5GHz WCSP-14

Recommend Parts

TMP275AIDR

0.5C I2C temp sensor, 12-bit, 2.7-5.5V, alert output, 8-SOIC

Brand: TI

Package: 8-SOIC (4.90 x 3.91 x 1.50 mm)

IN STOCK: 3681pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IL485E

NVE IL485E IsoLoop isolated RS-485 transceiver, 2.5kVrms isolation, 35Mbps, 16-SOIC WB

Brand: nve

Package: SOIC-16 WB

IN STOCK: 5280pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFS4227TRLPBF

IRFS4227TRLPBF – 200V N-Channel HEXFET PDP Switch Power MOSFET, 26 mΩ RDS(on), D2PAK (TO-263)

Brand: infineon

Package: D2PAK (TO-263)

IN STOCK: 4334pcs

Cargo cycle: 3-7 Days

The minimum order is 1

CD4070BM96

Quad 2-input XOR gate, 3-18V CMOS, 65ns at 10V, SOIC-14

Brand: TI

Package: SOIC-14 (8.75 x 3.9 x 1.5mm)

IN STOCK: 4245pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AB1526

Bluetooth 5.0 Dual Mode Audio SoC, TWS, AAC, Dual-mic ENC, Integrated Charger, BGA

Brand: airoha

Package: BGA

IN STOCK: 25000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LP2980IM5-5.0

50mA micropower ultra-low-dropout regulator, 5V, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.1 mm)

IN STOCK: 2557pcs

Cargo cycle: 3-7 Days

The minimum order is 1