Opens in a new tab

FT2232D-REEL

Dual USB to Serial UART/FIFO IC, MPSSE for JTAG/I2C/SPI, USB 2.0 Full Speed, LQFP-48

3824

Effective Inventory

Image for reference only

Manufacturer Part:

FT2232D-REEL

Package:

LQFP-48 (7 x 7 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The FT2232D-REEL from FTDI (Future Technology Devices International) is a dual USB to serial UART/FIFO interface IC. It features two independent multi-purpose UART/FIFO controllers that can be individually configured for various modes including UART, FIFO, bit-bang I/O, MPSSE (Multi-Protocol Synchronous Serial Engine) for JTAG/I2C/SPI, CPU-style FIFO, MCU host bus emulation, and fast opto-isolated serial. The device is fully USB 2.0 Full Speed compliant and handles the entire USB protocol on-chip, eliminating the need for USB-specific firmware programming.

Key Specifications

USB Interface USB 2.0 Full Speed (12 Mbps)
Channels Dual (2x UART/FIFO)
UART Data Rate 300 baud to 3 Mbaud (TTL)
FIFO Data Rate Up to 1 MB/s
Supply Voltage 4.35V to 5.25V
I/O Voltage 5V and 3.3V with independent level conversion
Operating Temperature -40 to 85°C
Package LQFP-48 (7x7mm)
Packaging Tape & Reel

Features

  • Dual channel USB to serial/parallel with multiple configurable interface modes
  • Multi-Protocol Synchronous Serial Engine (MPSSE) for JTAG, I2C, SPI
  • CPU-style FIFO interface mode and MCU host bus emulation mode
  • Fast opto-isolated serial interface mode
  • Integrated 3.3V LDO regulator for USB I/O
  • 5V and 3.3V logic I/O with independent level conversion per channel
  • Integrated 6MHz-48MHz clock multiplier PLL
  • EEPROM configurable via USB for VID/PID and string descriptors
  • Royalty-free VCP and D2XX drivers for Windows, macOS, Linux
  • Pin-to-pin compatible with FT2232C and FT2232L

Applications

  • USB to dual RS232/RS422/RS485 converters
  • USB JTAG programming and debugging interfaces
  • USB to SPI and I2C bridge adapters
  • Industrial control and instrumentation
  • FPGA/CPLD configuration and programming
Product Introduction: FT2232D-REEL Product Introduction

The FT2232D is a dual-channel USB to serial UART/FIFO interface IC developed by FTDI. As an updated version of the third-generation USB UART/FIFO family, it provides two independently configurable multi-purpose controllers that support UART, FIFO, bit-bang, MPSSE, CPU FIFO, MCU host bus emulation, and opto-isolated serial modes. The on-chip USB protocol handler eliminates the need for firmware development, while the integrated 3.3V LDO and PLL simplify external circuitry. With royalty-free VCP and D2XX drivers, the FT2232D significantly reduces development time for USB connectivity applications.

Working Principle: FT2232D-REEL Working Principle

The FT2232D operates as a bridge between a USB host and two independent serial or parallel channels. The USB Serial Interface Engine (SIE) handles all USB protocol communication, including enumeration, data transfer, and power management. Each channel has its own configuration register set that determines the interface mode (UART, FIFO, MPSSE, etc.). In UART mode, data is buffered in 128-byte transmit and 384-byte receive FIFOs, with configurable baud rates up to 3 Mbaud. In MPSSE mode, the dedicated synchronous serial engine generates clock and data signals for JTAG, I2C, or SPI protocols without CPU intervention. The internal 3.3V LDO provides I/O voltage for USB signals, while independent level shifters allow each channel to operate at 5V or 3.3V logic levels.

Pin Description: FT2232D-REEL Pin Definition and Functions
Pin Name Type Function
1 EECS I/O EEPROM Chip Select
2 EESK Output EEPROM Clock
3 EEDATA I/O EEPROM Data
4-19 ADBUS0-7 I/O Channel A Data Bus
20 VCC Power +5V Supply
21-36 BDBUS0-7 I/O Channel B Data Bus
37 AGND Ground Analog Ground
38 AVCC Power Analog Supply
39 RESET# Input Active Low Reset
40-47 Misc Mixed Clock, Test, PWRSEN, etc.
48 EECS I/O EEPROM Chip Select
Application Scenarios: In which products and applications is FT2232D-REEL used
  • USB to dual RS-232/RS-422/RS-485 serial converters for industrial communication
  • FPGA and CPLD JTAG programming and boundary scan interfaces
  • USB to SPI/I2C bridge adapters for embedded system debugging
  • Legacy peripheral upgrades from serial/parallel to USB connectivity
  • Galvanically isolated USB data acquisition and instrumentation systems
Alternative Models: What chips are recommended as replacements for FT2232D-REEL
Manufacturer Part Number Package Notes
FTDI FT2232HL LQFP-48 Hi-Speed USB 2.0 (480Mbps), pin compatible upgrade
FTDI FT4232H LQFP-64 Quad channel, Hi-Speed USB 2.0
Microchip MCP2221 SSOP-20 Single channel USB-I2C/UART bridge
Silicon Labs CP2105 QFN-24 Dual channel USB-UART bridge
NXP LPC11U35 QFP-48 ARM Cortex-M0 USB MCU alternative

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1