Opens in a new tab

Home » Integrated Circuits ICs, Sensors » FXLS8967AFR3

FXLS8967AFR3

AEC-Q100 3-axis MEMS accel, ±2-16g, 12-bit, ≤1μA low-power, SDCD, DFN-10 (2x2mm) wettable

0

Effective Inventory

Image for reference only

Manufacturer Part:

FXLS8967AFR3

Package:

DFN-10 (2 x 2 x 0.95 mm) with wettable flanks

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The FXLS8967AFR3 is an NXP (now transitioned to STMicroelectronics) AEC-Q100 qualified 3-axis MEMS accelerometer with ±2g/4g/8g/16g selectable full-scale ranges, 12-bit resolution, and ultra-low power consumption down to 0.7μA. It features autonomous motion detection, SDCD (Sensor Data Change Detection) for freefall/motion/no-motion events, and a 144-byte FIFO/LIFO buffer in a 2x2mm DFN-10 package with wettable flanks.

Key Specifications

Full-Scale Range ±2g / ±4g / ±8g / ±16g (selectable)
Resolution 12-bit
Output Data Rate (ODR) 0.78 Hz to 3200 Hz
Noise Density 230 μg/√Hz (high-performance mode)
Current (HPM, 3200Hz) 150 μA typ.
Current (LPM, 50Hz) 4 μA typ.
Current (LPM, 6.25Hz) ≤1 μA
Standby Current 0.6 μA typ.
Hibernate Current 15 nA typ.
Interface I2C up to 1MHz / SPI up to 4MHz
FIFO 144 bytes (32 x 12-bit XYZ triplets)
Supply Voltage 1.71V to 3.6V
Operating Temperature -40°C to +105°C
Qualification AEC-Q100

Features

  • AEC-Q100 qualified, extended -40°C to +105°C temperature range
  • Ultra-low power: ≤1μA at ODR ≤6.25Hz, 15nA hibernate mode
  • 12-bit acceleration data with 8-bit temperature sensor
  • Low noise: 230μg/√Hz in high-performance mode
  • SDCD block for freefall, motion/no-motion, high-g/low-g detection
  • Autonomous orientation detection (portrait/landscape/up/down)
  • Dedicated ultra-low-power motion detection mode with single-wire interface
  • 12-bit vector magnitude calculation
  • External trigger input for synchronized data collection
  • 144-byte FIFO/LIFO buffer for batch data readout
  • Bidirectional self-test diagnostic (unaffected by device motion)
  • DFN-10 (2x2x0.95mm) with wettable flanks for AOI

Applications

  • Car alarm and intrusion detection (ultra-low-power motion wakeup)
  • Automotive telematics and T-Box
  • Door checker and inclinometer
  • Smart lock vibration sensing
  • Connected radio motion-activated wake-up
Product Introduction: FXLS8967AFR3 Product Introduction

The FXLS8967AFR3 is an NXP AEC-Q100 qualified 3-axis MEMS accelerometer with ±2/4/8/16g selectable ranges, 12-bit resolution, and ultra-low power consumption (≤1μA at ODR ≤6.25Hz, 15nA hibernate). It features SDCD for freefall/motion/no-motion detection, autonomous orientation detection, 144-byte FIFO/LIFO, vector magnitude calculation, and bidirectional self-test. The dedicated motion-detection mode with single-wire interface enables ultra-low-power car alarm and T-Box wake-up applications. Available in DFN-10 (2x2mm) with wettable flanks for automotive optical inspection. Product now transitioned to STMicroelectronics.

Working Principle: FXLS8967AFR3 Working Principle

The FXLS8967AFR3 uses a capacitive MEMS sensing element with a proof mass suspended by silicon springs. Acceleration displaces the proof mass, changing the capacitance between the mass and fixed electrodes. The capacitance change is converted to voltage by a C-V converter, then digitized by a 12-bit ADC. The digital backend provides configurable ODR, filtering, and data processing. In high-performance mode, the full 12-bit resolution and 230μg/√Hz noise are available. In low-power mode, the ADC duty-cycles to reduce current while maintaining selected ODR. The SDCD (Sensor Data Change Detection) block compares acceleration data against programmable thresholds autonomously, generating interrupts for freefall, motion, or high-g events without MCU intervention. The motion-detection mode uses an ultra-low-power comparator path that can wake the device from hibernate (15nA) on vibration, with a single-wire output to the MCU. The FIFO/LIFO buffer accumulates up to 32 XYZ samples, allowing the MCU to remain in sleep for extended periods between batch reads.

Pin Description: FXLS8967AFR3 Pin Definition and Functions
Pin Mnemonic Description
1 VDD Power supply (1.71-3.6V)
2 GND Ground
3 INT1/MOT_DET Interrupt 1 / Motion detect output
4 INT2/BOOT_OUT Interrupt 2 / Boot output
5 SA0/INTF_SEL I2C address select / Interface select
6 SDA/SPI_MOSI/SPI_DATA I2C data / SPI MOSI
7 SCL/SPI_SCLK I2C clock / SPI clock
8 SPI_MISO SPI data output (MISO)
9 SPI_CS_B/WAKE_UP SPI chip select / Wake-up pin
10 BT_MODE/EXT_TRIG Boot mode select / External trigger
Application Scenarios: In which products and applications is FXLS8967AFR3 used
  • Car alarm ultra-low-power motion detection with 15nA hibernate and single-wire MOT_DET output
  • Automotive T-Box telematics with freefall detection via SDCD and FIFO batch readout
  • Door checker inclinometer with autonomous orientation detection and 12-bit resolution
  • Smart lock vibration sensing with vector magnitude threshold for tamper detection
  • Connected radio motion-activated wake-up at ≤1μA with bidirectional self-test diagnostic
Alternative Models: What chips are recommended as replacements for FXLS8967AFR3
Model Manufacturer Key Difference
FXLS8962AFR1 NXP Similar but different feature set (no SDCD)
LIS2DHTR ST 3-axis, 12-bit, ±16g, non-automotive
ADXL345 ADI 3-axis, 13-bit, ±16g, non-automotive
BMA456 Bosch 3-axis, 16-bit, wearables focused
KX122-1037 ROHM 3-axis, 16-bit, automotive qualified

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1