Opens in a new tab

GD25Q127CYIGR

128Mb (16MB) SPI NOR Flash, Quad I/O, 104MHz, 2.7-3.6V, 8-WDFN (6x8mm)

2102

Effective Inventory

Image for reference only

Manufacturer Part:

GD25Q127CYIGR

Package:

8-WDFN Exposed Pad (6.0 x 8.0 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The GD25Q127CYIGR is a 128Mb (16MB) serial NOR flash memory manufactured by GigaDevice Semiconductor, supporting standard SPI, Dual I/O SPI, and Quad I/O SPI modes with clock frequencies up to 104 MHz. Packaged in an 8-WDFN (6×8 mm) exposed pad package, this 3V uniform sector flash features programmable sector protection, hardware/software write protection, and deep power-down mode for ultra-low standby current.

Key Specifications

Memory Size 128Mb (16MB, 16M x 8)
Memory Type NOR Flash (Non-Volatile)
Interface SPI – Quad I/O
Clock Frequency 104 MHz (Quad I/O mode)
Supply Voltage 2.7V to 3.6V
Write Cycle Time 12 us (word), 2.4 ms (page)
Endurance 100,000 erase/program cycles
Operating Temperature -40°C to +85°C
Package 8-WDFN Exposed Pad (6 x 8 mm)

Features

  • 128Mb density with standard/dual/quad SPI interface for flexible throughput
  • 104 MHz clock in Quad I/O mode enables execute-in-place (XIP) operation
  • Uniform 4KB sector architecture with 64KB block erase support
  • Programmable sector protection and hardware write protection for data security
  • Deep power-down mode for ultra-low standby current consumption

Applications

  • Embedded system firmware storage and OTA update buffering
  • IoT device code storage and configuration data logging
  • Networking equipment boot flash and configuration backup
  • Consumer electronics (set-top boxes, routers, smart appliances)
  • Industrial control system parameter and firmware storage
Product Introduction: GD25Q127CYIGR Product Introduction

The GD25Q127CYIGR from GigaDevice Semiconductor is a 128Mb (16MB) serial NOR flash memory supporting standard SPI, Dual I/O, and Quad I/O modes up to 104 MHz. Organized as 16M x 8 bits with uniform 4KB sectors and 64KB blocks, the device provides flexible erase granularity and 100,000-cycle endurance. The 2.7V to 3.6V supply range makes it compatible with standard 3.3V logic systems. Features include programmable sector protection, top/bottom array protection, one-time programmable (OTP) area, and deep power-down mode. The 8-WDFN exposed pad package provides excellent thermal performance and is command-set compatible with Winbond W25Q128 and similar devices.

Working Principle: GD25Q127CYIGR Working Principle

The GD25Q127CYIGR operates as a standard SPI peripheral with chip select (CS), serial clock (CLK), and data lines (DI, DO, WP, HOLD). In Quad I/O mode, all four data pins serve as bidirectional I/O, enabling 4-bit-per-clock transfer at up to 104 MHz for execute-in-place (XIP) code execution. Read operations access the flash array through the SPI command protocol, while program and erase operations require the write-enable (WREN) command followed by the specific program/erase command. The internal state machine manages timing for page program (2.4 ms typical), sector erase, and block erase operations. The deep power-down command reduces standby current to microamp levels for battery-powered applications.

Pin Description: GD25Q127CYIGR Pin Definition and Functions
Pin Name Type Function
1 CS# Input Chip select (active low)
2 DO(IO1) I/O Data output / Quad I/O bit 1
3 WP#(IO2) I/O Write protect / Quad I/O bit 2
4 VSS Power Ground
5 DI(IO0) I/O Data input / Quad I/O bit 0
6 CLK Input Serial clock
7 HOLD#(IO3) I/O Hold / Quad I/O bit 3
8 VDD Power Supply voltage (2.7-3.6V)
9 EP Power Exposed pad (connect to VSS)
Application Scenarios: In which products and applications is GD25Q127CYIGR used
  • RTOS and Linux-based embedded system firmware storage with XIP boot
  • IoT device over-the-air (OTA) firmware update buffering with dual-bank operation
  • Router and gateway boot configuration and calibration data storage
  • Smart appliance parameter and user preference persistent storage
  • Industrial PLC firmware and configuration backup in harsh environments
Alternative Models: What chips are recommended as replacements for GD25Q127CYIGR
Manufacturer Part Number Package Notes
Winbond W25Q128JVSIQ SOIC-8 128Mb, Quad SPI, 133MHz
Macronix MX25L12833F SOP-8 128Mb, Quad SPI, 120MHz
ISSI IS25LP128 SOIC-8 128Mb, Quad SPI, 133MHz
Cypress S25FL128LAGMFI01 SOIC-8 128Mb, Quad SPI, 108MHz
Microchip SST26VF064B SOIC-8 64Mb, SQI, 104MHz

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1