Opens in a new tab

GD32F103ZKT6

Cortex-M3 108MHz, 512KB Flash, 64KB RAM, 3xCAN, ETH, LQFP-144

3968

Effective Inventory

Image for reference only

Manufacturer Part:

GD32F103ZKT6

Package:

LQFP-144 (20 x 20 x 1.4 mm, K package, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The GD32F103ZKT6 from GigaDevice is a 32-bit ARM Cortex-M3 MCU at 108MHz with 512KB Flash, 64KB RAM, and 144-pin LQFP package, offering pin-compatible upgrade over STM32F103ZE.

Key Specifications

Core ARM Cortex-M3
Max Frequency 108 MHz
Flash Memory 512 KB
SRAM 64 KB
I/O Pins 112 (5V tolerant)
ADC 3 x 12-bit (16 channels each)
DAC 2 x 12-bit
Timers 2x advanced, 4x GP 16-bit, 2x basic, SysTick, 2x WDG, RTC
Communication 5x USART, 3x SPI, 2x I2C, 2x I2S, 3x CAN, USB 2.0 FS, SDIO, ETH
Supply Voltage 2.0V to 3.6V
Package LQFP-144 (20x20mm)
Operating Temperature -40 to +85 C

Features

  • 108MHz Cortex-M3 (faster than STM32F103’s 72MHz)
  • 512KB Flash / 64KB SRAM
  • 3x CAN 2.0B controllers
  • 10/100 Ethernet MAC
  • USB 2.0 Full-Speed OTG
  • Pin-compatible with STM32F103ZE

Applications

  • Industrial automation and control
  • Networking and communication
  • Motor control systems
  • Consumer electronics
Product Introduction: GD32F103ZKT6 Product Introduction

The GD32F103ZKT6 from GigaDevice (兆易创新) is a 32-bit general-purpose microcontroller based on the ARM Cortex-M3 RISC core, operating at up to 108MHz. As part of the GD32F103 series, it offers higher performance (108MHz vs. 72MHz) and larger memory (up to 512KB Flash / 64KB SRAM) compared to the equivalent STM32F103 devices, while maintaining pin and software compatibility. The 512KB Flash and 64KB SRAM provide ample code and data space for complex applications including RTOS-based systems, communication protocol stacks, and signal processing algorithms. The rich peripheral set includes three 12-bit ADCs (each with up to 16 external channels), two 12-bit DAC channels, three CAN 2.0B controllers (compared to one in STM32F103), a 10/100 Ethernet MAC with DMA, USB 2.0 Full-Speed OTG, five USARTs, three SPIs, two I2C interfaces, and an SDIO controller. The 112 general-purpose I/O pins (5V tolerant) provide extensive connectivity options. Two advanced motor control timers with PWM generation, dead-time insertion, and brake input support motor drive applications. The GD32F103 series is widely used as a cost-effective alternative to STM32F103 in the Chinese market, with extensive ecosystem support including GD32 standard firmware library and compatibility with STM32 development tools.

Working Principle: GD32F103ZKT6 Working Principle

The GD32F103ZKT6 operates as a 32-bit ARM Cortex-M3 microcontroller. Key subsystems include: (1) Cortex-M3 Core – a 3-stage pipeline 32-bit RISC processor with hardware divide (2-12 cycles), multiply-accumulate (MAC) instruction, and nested vectored interrupt controller (NVIC) supporting 60 maskable interrupt channels with 16 priority levels; the 108MHz clock provides 1.25 DMIPS/MHz performance; (2) Memory – 512KB Flash organized as main memory block + information block (system memory for boot loader, option bytes for configuration); 64KB SRAM accessible in a single cycle; the core also includes an internal bus matrix connecting AHB, APB1 (36MHz max), and APB2 (108MHz max) buses; (3) Clock System – internal 8MHz RC (default after reset), external 4-25MHz crystal, internal 40kHz RC, external 32.768kHz crystal; the main PLL can multiply the input clock up to 108MHz; (4) Peripherals – all peripherals are memory-mapped and accessed via the bus matrix; the DMA controller (2 channels on DMA1, 5 channels on DMA2) offloads data transfer from the CPU; the Ethernet MAC connects to an external PHY via MII/RMII interface; (5) Pin Compatibility – the GD32F103ZKT6 is pin-compatible with STM32F103ZET6/ZGT6, allowing direct PCB replacement; software migration requires updating the Flash base address and clock configuration for the higher frequency.

Pin Description: GD32F103ZKT6 Pin Definition and Functions
Pin Group Count Function
VDD/VSS 5 pairs Power and ground
VDDA/VSSA 1 pair Analog supply
VBAT 1 Battery backup for RTC
NRST 1 System reset
BOOT0/BOOT1 2 Boot mode selection
OSC_IN/OSC_OUT 2 Main crystal oscillator
OSC32_IN/OSC32_OUT 2 32kHz RTC crystal
GPIO/AF 112 General I/O with alternate functions
Application Scenarios: In which products and applications is GD32F103ZKT6 used
  • Industrial gateway: 108MHz for protocol processing, Ethernet MAC for network, 3x CAN for field bus, 512KB for RTOS and stack
  • Motor controller: 2x advanced timer for dual-motor FOC, 3x ADC for current sensing, CAN for communication
  • Consumer device: high-performance 108MHz MCU with USB, SDIO for SD card, 64KB SRAM for media buffers
  • STM32F103 upgrade: drop-in pin-compatible replacement with 50% more CPU speed and more memory
Alternative Models: What chips are recommended as replacements for GD32F103ZKT6
Manufacturer Part Number Package Notes
ST STM32F103ZGT6 LQFP-144 Industry standard, 72MHz, 1MB Flash
GigaDevice GD32F103ZET6 LQFP-144 512KB Flash version
ST STM32F427ZGT6 LQFP-144 Cortex-M4, 180MHz, upgrade path
NXP LPC1788FET208 LQFP-208 Cortex-M3, 120MHz, LCD controller

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1