Opens in a new tab

H2019FNLT

1-port Gigabit Ethernet transformer, 10/100/1000Base-T, 350µH, SMT

5678

Effective Inventory

Image for reference only

Manufacturer Part:

H2019FNLT

Package:

SMT (16-pin, 13.5×11.4mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The H2019FNLT from Pulse Electronics is a 1-port Gigabit Ethernet transformer module for 10/100/1000Base-T PHY interfaces. It provides signal coupling, impedance matching, and isolation with 350µH OCL in a compact SMT package.

Key Specifications

Type Ethernet LAN transformer
Speed 10/100/1000 Base-T
Ports 1
OCL 350µH min @ 8mA
Turns Ratio 1CT:1CT
Insertion Loss -1.0dB max @ 100MHz
HI-POT 1500Vrms
Operating Temp -40°C ~ +85°C
Package SMT 16-pin

Features

  • Single-port Gigabit Ethernet transformer
  • Supports 10/100/1000Base-T
  • 350µH minimum OCL at 8mA bias
  • 1CT:1CT turns ratio
  • 1500Vrms isolation (HI-POT)
  • Low insertion loss: -1.0dB max at 100MHz
  • IEEE 802.3 compliant
  • Center-tapped for PoE capability

Applications

  • Gigabit Ethernet PHY coupling
  • LAN card and motherboard transformers
  • Embedded Ethernet interfaces
  • Network switch port transformers
  • Industrial Ethernet equipment
Product Introduction: H2019FNLT Product Introduction

The H2019FNLT from Pulse Electronics is a single-port Gigabit Ethernet transformer providing signal coupling and galvanic isolation between Ethernet PHY and RJ-45 connector. With 350µH OCL and 1500Vrms isolation, it meets IEEE 802.3 requirements for 10/100/1000Base-T operation.

Working Principle: H2019FNLT Working Principle

The transformer provides galvanic isolation between the PHY transceiver and the cable plant. Each of the 4 differential pairs has a center-tapped transformer winding for common-mode rejection. The 350µH OCL ensures adequate low-frequency response for 1000Base-T PAM-5 signaling. The center taps support PoE (Power over Ethernet) current injection or extraction.

Pin Description: H2019FNLT Pin Definition and Functions
Pin Group Function
TX pair Transmit center-tapped transformer
RX pair Receive center-tapped transformer
BI_DA/BI_DB Bi-directional pairs A and B
BI_DC/BI_DD Bi-directional pairs C and D
Center taps PoE / Bias voltage connections
Application Scenarios: In which products and applications is H2019FNLT used
  • Gigabit Ethernet PHY coupling
  • Embedded Ethernet interfaces
  • Network switch transformers
  • Industrial Ethernet equipment
Alternative Models: What chips are recommended as replacements for H2019FNLT
Part Number Manufacturer Notes
H2019FNL Pulse Non-tape-reel version
749020023A Wurth Gigabit transformer alternative
ALT3232M-151-T001 TDK Gigabit transformer

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1