Opens in a new tab

HCPL-7800-000E

Isolation amplifier, 0.05% gain accuracy, 3750Vrms isolation, 100kHz BW, shunt current sensing, DIP-8

12284

Effective Inventory

Image for reference only

Manufacturer Part:

HCPL-7800-000E

Package:

DIP-8 Wide Body (400 mil, 9.7 x 7.6 x 5.1 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HCPL-7800-000E from Broadcom (formerly Avago) is a high-precision isolation amplifier designed for current sensing in motor drive and power conversion applications. It provides galvanic isolation of 3750 Vrms with 0.05% gain accuracy and 0.3 mV input offset voltage. The device is optimized for sensing current through shunt resistors in noisy high-voltage environments.

Key Specifications

Gain Accuracy ±0.05%
Input Offset Voltage 0.3 mV (max)
Isolation Voltage 3750 Vrms
Bandwidth 100 kHz
Supply Voltage 4.5 V to 5.5 V
Supply Current 12 mA (input), 13 mA (output)
CMRR 95 dB (DC)
Operating Temperature -40°C to +85°C
Package DIP-8 (wide body, 400 mil)

Features

  • High-precision gain: ±0.05%
  • Ultra-low input offset voltage: 0.3 mV max
  • Excellent isolation: 3750 Vrms
  • High CMRR: 95 dB at DC
  • 100 kHz signal bandwidth
  • Optimized for shunt resistor current sensing
  • Safety approvals: UL, CSA, IEC

Applications

  • Motor drive phase current sensing
  • Inverter current feedback
  • Switching power supply current monitoring
  • Battery management current measurement
  • Industrial process control
Product Introduction: HCPL-7800-000E Product Introduction

The HCPL-7800-000E is a high-precision isolation amplifier from Broadcom designed specifically for motor drive current sensing and other applications requiring accurate current measurement in the presence of high common-mode voltages. The device amplifies the small differential voltage developed across a shunt resistor while providing 3750 Vrms galvanic isolation between the high-voltage side and the low-voltage measurement side. With ±0.05% gain accuracy and 0.3 mV maximum input offset, it delivers measurement precision comparable to costly closed-loop Hall effect sensors but at a fraction of the cost. The sigma-delta modulation and digital isolation technique ensure excellent noise immunity and long-term stability.

Working Principle: HCPL-7800-000E Working Principle

The HCPL-7800-000E uses a sigma-delta analog-to-digital converter on the input side to digitize the differential voltage from the shunt resistor. The digitized signal is transmitted across an optical isolation barrier to the output side, where a DAC reconstructs the analog signal and an output amplifier drives the final voltage output. This approach provides excellent isolation, linearity, and noise immunity. The input amplifier has high common-mode rejection (95 dB at DC) to reject the large common-mode voltages present in motor drive applications. The gain is laser-trimmed to ±0.05% accuracy at the factory. The 100 kHz bandwidth captures the harmonic content of motor currents for accurate field-oriented control (FOC) algorithms.

Pin Description: HCPL-7800-000E Pin Definition and Functions
Pin Name Type Function
1 VIN+ Input Non-inverting differential input
2 VIN- Input Inverting differential input
3 VDD1 Power Input side 5V supply
4 GND1 Power Input side ground
5 GND2 Power Output side ground
6 VOUT Output Analog voltage output
7 VDD2 Power Output side 5V supply
8 VREF Output Reference voltage output (2.5V)
Application Scenarios: In which products and applications is HCPL-7800-000E used
  • Three-phase motor drive current feedback for FOC
  • Solar inverter MPPT current measurement
  • UPS inverter output current monitoring
  • EV/HEV battery current sensing
  • Welding equipment current regulation
Alternative Models: What chips are recommended as replacements for HCPL-7800-000E
Manufacturer Part Number Package Notes
Broadcom HCPL-7840-000E DIP-8 Lower gain accuracy, lower cost
Texas Instruments AMC1301 SOIC-8 Isolated amplifier, 250mV input
Analog Devices ADuM3190 SOIC-16 Isolated error amplifier
Infineon TLE9187QK TSSOP-16 Isolated current sense amplifier

Recommend Parts

RK73B2ATTD100J

10Ohm +/-5% 0.125W thick film resistor, 0805, +/-200 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0805 (2012 Metric) 2.0 x 1.25 x 0.55 mm

IN STOCK: 26435pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPL5010DDCR

Nano-power watchdog timer with power good, SOT-23-6

Brand: TI

Package: SOT-23-6 (2.9 x 1.6 x 1.1 mm, DDC package)

IN STOCK: 12122pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

WS2811

3-channel LED driver IC with built-in oscillator, SOP-8

Brand: Worldsemi

Package: SOP-8 (5.2 x 4.0 mm)

IN STOCK: 7374pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AD9912ABCPZ

1GSPS direct digital synthesizer with 14-bit DAC, LFCSP-64

Brand: ADI

Package: LFCSP-64 (9.0 x 9.0 mm, BCPZ package)

IN STOCK: 3719pcs

Cargo cycle: 3-7 Days

The minimum order is 1