Opens in a new tab

HEF4051BT653

8-ch analog mux/demux, 3-15V, 175Ohm Ron, 70MHz, SOIC-16

13709

Effective Inventory

Image for reference only

Manufacturer Part:

HEF4051BT653

Package:

SOIC-16 (9.90 x 3.90 x 1.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HEF4051BT653 from Nexperia is an 8-channel analog multiplexer/demultiplexer with 3-bit address selection in a 16-pin SOIC package. With 3V to 15V supply range, 175Ohm on-resistance at 5V, and 70MHz bandwidth, it is the industry-standard 8:1 analog switch for signal routing in industrial, medical, and consumer applications.

Key Specifications

Configuration 8-channel (SP8T) analog mux/demux
Supply Voltage 3.0V to 15.0V
On-Resistance (Ron) 175 Ohm (typ @ 5V)
Ron Flatness 30 Ohm (typ)
Bandwidth (-3dB) 70 MHz
Crosstalk -50 dB @ 1MHz
Off-Leakage 200 nA (max)
Charge Injection —
Operating Temperature -40 to +125 C
Package SOIC-16 (9.9 x 3.9 mm)

Features

  • 8-channel analog multiplexer/demultiplexer
  • 3-bit binary address selection (S1-S3)
  • Active-low enable input
  • 3V to 15V wide supply range
  • 175Ohm typical on-resistance at 5V
  • 70MHz wide bandwidth
  • Bidirectional signal path
  • CMOS low power dissipation
  • -50dB crosstalk at 1MHz
  • JEDEC standard JESD 13-B compliant

Applications

  • Analog signal multiplexing for data acquisition
  • Sensor array channel selection
  • Audio signal routing
  • Digital multiplexing
Product Introduction: HEF4051BT653 Product Introduction

The HEF4051BT653 from Nexperia is an 8-channel analog multiplexer/demultiplexer in a 16-pin SOIC package. The 653 suffix denotes tape and reel packaging. Based on the classic 4051 design, it uses eight bidirectional analog switches controlled by a 3-bit binary address (S1-S3) and an active-low enable (E). With a 3V to 15V supply range, it supports both 3.3V and 5V logic systems as well as higher voltage analog signal paths. The 175Ohm typical on-resistance at 5V and 70MHz bandwidth make it suitable for a wide range of analog signal routing applications. The HEF4051B is specified from -40C to +125C for industrial and automotive applications.

Working Principle: HEF4051BT653 Working Principle

The HEF4051BT operates through three subsystems: (1) Analog Switch Array: Eight bidirectional analog switches (Y0-Y7) connect to a common Z terminal. Each switch is implemented as a CMOS transmission gate that can pass analog signals from VDD to VEE (including negative voltages when VEE is tied below ground). When a switch is selected, its on-resistance is typically 175Ohm at 5V. (2) Digital Address Decoder: A 3-to-8 line decoder converts the binary address on S1, S2, S3 into one-of-eight select signals. Only the addressed switch is turned on; all others remain in the high-impedance off-state. The decoder ensures break-before-make operation when using the enable pin. (3) Enable Control: When E is LOW, the addressed switch is selected. When E is HIGH, all switches are forced to the off-state regardless of the address inputs. This allows multiple HEF4051 devices to be cascaded for larger multiplexer arrays (16:1, 32:1) using the enable pin for chip selection.

Pin Description: HEF4051BT653 Pin Definition and Functions
Pin Name Type Description
1 Y4 Analog Channel 4 input/output
2-8 Y6, Y7, Y5, Y3, Y2, Y1, Y0 Analog Channel 6,7,5,3,2,1,0 inputs/outputs
9 Z Analog Common input/output
10 E Input Enable (active LOW)
11-13 S3, S2, S1 Input Address select inputs
14 Y8/NC — No connect (7-channel on some variants)
15 Y7 Analog Channel 7 input/output
16 VDD Power Positive supply (3-15V)
8 VSS/GND Power Ground
Application Scenarios: In which products and applications is HEF4051BT653 used
  • 8-channel sensor multiplexing with 3-bit address selection for data acquisition systems
  • Audio signal routing with 70MHz bandwidth and -50dB crosstalk for multi-source selection
  • Industrial PLC analog input channel expansion using cascaded HEF4051 for 16:1 or 32:1 multiplexing
  • Medical instrument electrode selection with 200nA low off-leakage and bidirectional signal path
Alternative Models: What chips are recommended as replacements for HEF4051BT653
Model Manufacturer Channels Ron Notes
CD74HC4051EE4 TI 8 70Ohm Lower Ron, 2-10V
ADG728BCPZ ADI 8 2.5Ohm I2C control, very low Ron
MUX508IPWR TI 8 125Ohm Precision, low leakage
DG408DY-T1-E3 Vishay 8 80Ohm Industry compatible

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1