Opens in a new tab

Home » Integrated Circuits ICs » HEF4094BT

HEF4094BT

8-bit shift register, 3-15V, latched 3-state outputs, cascade QS/QS’, serial-to-parallel, SOIC-16

6200

Effective Inventory

Image for reference only

Manufacturer Part:

HEF4094BT

Package:

SOIC-16 (10.3 x 5.3 x 1.75mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HEF4094BT is an 8-stage serial shift register with output latches and 3-state outputs from Nexperia. Data is shifted in serially on the rising edge of the clock and transferred to the output latches on the rising edge of the strobe (STR). The 3-state outputs (QP0-QP7) can drive bus lines directly, while the serial output (QS) enables cascading. Operating from 3V to 15V, it suits display driving, LED control, and serial-to-parallel data conversion in SOIC-16.

Key Specifications

Function 8-bit shift register with latched 3-state outputs
Stages 8 (serial-in, parallel-out)
Supply Voltage 3V to 15V
Clock Frequency Up to 12MHz @ 10V
Propagation Delay 95ns typ @ 10V
Output Drive ±3.4mA @ 10V; ±6.8mA @ 15V
Output Type 3-state (QP0-QP7); push-pull (QS, QS’)
Output Latch Yes (STR pin controls latch)
Cascade Output QS (after 8th stage) and QS’ (after 9th stage)
Quiescent Current 20µA max @ 20V
Package SOIC-16 (10.3 x 5.3mm)
Operating Temperature -40°C to +125°C

Features

  • 8-bit serial-in, parallel-out shift register
  • Output latches with separate strobe control
  • 3-state parallel outputs for bus driving
  • Serial cascade outputs (QS and QS’) for daisy-chaining
  • 3V to 15V supply range
  • Shift and latch operate independently
  • Up to 12MHz clock rate at 10V
  • Standard CD4000B CMOS logic family

Applications

  • LED display driving (7-segment, bar graph)
  • Serial-to-parallel data conversion
  • Multi-channel relay/solenoid control
  • GPIO expansion via serial interface
  • Instrumentation display multiplexing
  • Cascaded display panels
Product Introduction: HEF4094BT Product Introduction

The HEF4094BT from Nexperia is an 8-stage serial shift register with storage registers and 3-state outputs, part of the HEF4000B logic family. Data is clocked into the 8-bit shift register on the rising edge of the clock (CP). The rising edge of the strobe (STR) transfers the shift register data to the 8-bit storage register, which drives the QP0-QP7 outputs. The 3-state outputs can be enabled or disabled via the output enable (OE) pin, allowing direct connection to bus lines. The QS output provides the shift register data after the 8th stage, and QS’ provides data after the 9th stage — both useful for cascading multiple HEF4094 devices. The separation of shift and storage clocks allows updating the display without flicker. The wide 3-15V supply range suits industrial and automotive applications.

Working Principle: HEF4094BT Working Principle

The HEF4094BT contains two 8-bit registers: a shift register and a storage (latch) register. On each rising edge of CP, the serial data at the D input is shifted into the first stage, and all existing data shifts one position toward the 8th stage. After 8 clock cycles, the first data bit appears at the 8th stage and is available at the QS cascade output. The QS’ output provides the 9th stage data for extended cascading. When STR goes high, the current contents of the shift register are transferred to the storage register. The storage register outputs (QP0-QP7) reflect this data when OE is high (3-state enabled). When OE is low, the outputs go to high-impedance. The separation of shift and latch clocks means the display can be updated without visible flicker: new data is shifted in (potentially taking many clock cycles), then latched to the outputs in a single STR pulse.

Pin Description: HEF4094BT Pin Definition and Functions
Pin Name Description
1 STR Strobe input (rising edge latches data)
2 D Serial data input
3 CP Clock input (rising edge shifts data)
4 OE Output enable (high = outputs active, low = Hi-Z)
5 QP4 Parallel output bit 4
6 QP5 Parallel output bit 5
7 QP6 Parallel output bit 6
8 QP7 Parallel output bit 7
9 QS Serial cascade output (after 8th stage)
10 QS’ Serial cascade output (after 9th stage)
11 QP0 Parallel output bit 0
12 QP1 Parallel output bit 1
13 QP2 Parallel output bit 2
14 QP3 Parallel output bit 3
15 VSS Ground
16 VDD Positive supply (3V to 15V)
Application Scenarios: In which products and applications is HEF4094BT used
  • Cascaded LED Display Panel: Cascade three HEF4094BT devices to drive a 24-LED bar graph display. Connect QS from the first device to D of the second, and so on. Shift in 24 bits of LED state data (3 bytes), then pulse STR to update all displays simultaneously without flicker. The 3-state outputs allow the display to be disabled (OE low) during data loading for a blank-then-update display sequence.
  • 7-Segment Display Multiplexing: Use one HEF4094BT per digit in a multi-digit 7-segment display. Each device drives one digit’s segments (a-g plus DP). All devices share CP, STR, and OE lines. Data is cascaded through QS. This creates a 3-wire serial interface (D, CP, STR) to control any number of digits, saving MCU GPIO pins.
  • Industrial Relay Controller: Control 8 relays or solenoid valves from an MCU using only 3 pins (D, CP, STR). The 15V supply range allows direct connection to 12V industrial relay coils through external driver transistors. The 3-state outputs can be wire-ORed with other data sources on a shared control bus. Cascade multiple devices for 16 or 24 channels of control.
Alternative Models: What chips are recommended as replacements for HEF4094BT
Model Bits VDD Key Difference
CD4094BM96 8 3-18V TI version, higher voltage
74HC595D 8 2-6V Nexperia, low-voltage, more popular
74HCT595D 8 4.5-5.5V Nexperia, TTL input thresholds
TPIC6B595 8 4.5-5.5V TI, 50V/150mA DMOS outputs

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1