Opens in a new tab

HFD27/012-S

12VDC DPDT signal relay, 2A/30V, 5000Vrms isolation, DIP-16, sealed, 10M cycles

2374

Effective Inventory

Image for reference only

Manufacturer Part:

HFD27/012-S

Package:

DIP-16 (20.3 x 10.2 x 15.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The HFD27/012-S from Hongfa is a 12VDC/24VDC DPDT signal relay in a DIP-16 package. With 2A/30VDC switching and 5000Vrms isolation, it provides reliable signal switching for industrial control and telecom applications.

Key Specifications

Coil Voltage 12 VDC
Contact Form DPDT (2 Form C)
Switching Capacity 2A / 30VDC, 0.5A / 125VAC
Coil Resistance 400 Ohm (typical)
Isolation 5000 Vrms (coil to contact)
Mechanical Life 10,000,000 operations
Operating Temperature -40C to +70C

Features

  • DPDT (2 Form C) contact configuration for signal routing
  • 12VDC coil with 400 Ohm resistance for low power consumption
  • 5000Vrms dielectric strength for safety-critical isolation
  • 10 million mechanical operations for long service life
  • DIP-16 through-hole package for easy PCB assembly
  • Sealed relay body for automatic washing compatibility

Applications

  • Industrial PLC signal switching and routing
  • Telecom line switching and test equipment
  • Security system sensor and alarm circuits
  • Medical equipment signal isolation
Product Introduction: HFD27/012-S Product Introduction

The HFD27/012-S from Hongfa is a 12VDC ultra-sensitive DPDT (2 Form C) signal relay in a DIP-16 through-hole package. The relay features two independent changeover contact sets, each rated for 2A at 30VDC or 0.5A at 125VAC, suitable for low-level signal switching. The 12VDC coil has a resistance of approximately 400 Ohm, drawing only 30mA at nominal voltage for low power consumption. The 5000Vrms dielectric strength between coil and contacts provides excellent isolation for safety-critical applications including medical and telecom equipment. The sealed relay construction (plastic-sealed type) enables compatibility with automatic PCB washing processes. The relay achieves 10 million mechanical operations minimum, ensuring long service life in frequently switched applications. The DIP-16 footprint with 2.54mm pin pitch allows direct insertion into standard PCB sockets or soldering. The HFD27 series is widely used in industrial automation, security systems, and telecommunications where reliable signal switching with high isolation is required.

Working Principle: HFD27/012-S Working Principle

The HFD27/012-S uses an electromagnetic coil to mechanically switch contacts. (1) Coil Energization: When 12VDC is applied across the coil (pins 1-16), current flows through the coil winding, generating a magnetic field in the iron core. The magnetic field attracts the armature, which is held in place by the residual magnetic force while energized. (2) Contact Transfer: The armature movement is mechanically linked to the contact springs. When the coil is energized, the common (COM) contacts disconnect from the normally closed (NC) contacts and connect to the normally open (NO) contacts. When the coil is de-energized, the return spring moves the armature back, and the contacts revert to their normal state. (3) Arc Suppression: The low switching current (2A max) and voltage (30VDC) minimize contact arcing. For inductive loads, external suppression circuits (RC snubbers or diodes) may be needed to extend contact life. (4) Isolation: The physical separation between the coil and contacts, combined with the insulating bobbin and housing, provides the 5000Vrms dielectric strength. This ensures that no hazardous voltage can reach the control circuit from the load circuit.

Pin Description: HFD27/012-S Pin Definition and Functions
Pin Name Type Function
1 Coil+ Input Coil positive terminal
16 Coil- Input Coil negative terminal
4,13 COM1, COM2 Common Common contacts
6,11 NO1, NO2 Normally Open Normally open contacts
8,9 NC1, NC2 Normally Closed Normally closed contacts
Application Scenarios: In which products and applications is HFD27/012-S used
  • Industrial PLC signal switching and routing with DPDT contacts
  • Telecom line switching and test equipment with 5000Vrms isolation
  • Security system sensor and alarm circuits with 10M cycle life
  • Medical equipment signal isolation in DIP-16 sealed package
Alternative Models: What chips are recommended as replacements for HFD27/012-S
Manufacturer Part Number Package Notes
Omron G6K-2F-Y-12VDC DIP-16 DPDT, 12V, similar
TE Connectivity VRT24112S DIP-16 DPDT, 12V, telecom relay
Panasonic TX2SA-12V DIP-16 DPDT, 12V, signal relay
Hongfa HFD27/005-S DIP-16 5VDC coil version

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1