Opens in a new tab

HMC862ALP3E

VCO, 5800-6400MHz, -85dBc/Hz phase noise, QFN-24

5931

Effective Inventory

Image for reference only

Manufacturer Part:

HMC862ALP3E

Package:

QFN-24 (4.0 x 4.0 x 0.90 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

HMC862ALP3E Overview

The HMC862ALP3E is a GaAs MMIC voltage-controlled oscillator (VCO) from Analog Devices, frequency range 5.9GHz-7.1GHz, phase noise -108dBc/Hz at 100kHz, output power +4dBm, in a QFN-24 package, suitable for microwave communication and radar systems.

Key Features

  • Frequency range: 5.9GHz-7.1GHz
  • Output power: +4dBm
  • Phase noise: -108dBc/Hz at 100kHz
  • Tuning voltage: 0V-14V
  • Supply voltage: 5V
  • Supply current: 120mA
Product Introduction: HMC862ALP3E Product Introduction

The HMC862ALP3E is a broadband voltage-controlled oscillator (VCO) from Analog Devices, covering 5800 MHz to 6400 MHz in a 24-lead QFN (4 mm x 4 mm) surface-mount package. It features ultra-low phase noise of -85 dBc/Hz at 10 kHz offset and -110 dBc/Hz at 100 kHz offset, with +3 dBm minimum output power. The VCO tuning voltage ranges from 0.5 V to 14 V for full frequency coverage, and the device operates from a +5 V supply at 85 mA. The RoHS-compliant plastic package enables standard SMT assembly without wire bonding.

Working Principle: HMC862ALP3E Working Principle

The HMC862ALP3E is a GaAs MMIC VCO utilizing a cross-coupled FET oscillator topology with on-chip LC tank circuit and varactor diode for frequency tuning. The oscillator core generates a stable sinusoidal output whose frequency is determined by the LC resonant frequency, which is varied by the tuning voltage applied to the varactor. The tuning voltage modulates the varactor capacitance, shifting the resonant frequency across the 5800-6400 MHz range. An output buffer amplifier provides isolation between the oscillator core and the load, maintaining frequency stability against load pull variations. The VCO achieves low phase noise through high-Q on-chip inductors and optimized transistor biasing. The Vtune input is AC-coupled with an internal reference, and the device requires external bypass capacitors on the VCC supply pins.

Pin Description: HMC862ALP3E Pin Definition and Functions
Pin Name Description
1-5, 8-12, 17-21, 24 GND Ground; connect all to PCB RF ground plane
6 VTUNE Tuning voltage input (0.5-14 V); controls output frequency
7 VCC1 Supply voltage +5 V; requires 100 pF and 2.2 uF bypass
13 VCC2 Supply voltage +5 V for buffer; requires 100 pF bypass
14 RFOUT RF output; AC coupled, 50 Ohm matched
15, 16 VCC3 Supply voltage +5 V for oscillator core
22, 23 NC No connect; leave floating
Application Scenarios: In which products and applications is HMC862ALP3E used
  • PLL Frequency Synthesizers: Local oscillator generation in C-band frequency synthesizer loops
  • Point-to-Point Radio: Transceiver LO source for 6 GHz microwave backhaul links
  • Satellite Upconverters: C-band upconverter LO in VSAT and earth station equipment
  • Test Equipment: Signal source for microwave signal generators and synthesizers
  • Military Communications: Frequency-agile LO in secure tactical radio systems

HMC862ALP3E is designed for local oscillator (LO) generation in microwave radio links, satellite communication terminals, and test equipment covering 6.5-26GHz output frequencies. The active multiplication provides +14dBm output power, sufficient to drive most mixer LO ports directly without additional amplification. Key applications include point-to-point microwave backhaul at 10-23GHz, VSAT transceivers, radar frequency conversion chains, and electronic warfare frequency synthesis. The +5V single-supply operation simplifies bias networks in dense RF front-end modules.

Alternative Models: What chips are recommended as replacements for HMC862ALP3E
Model Manufacturer Freq Range Phase Noise Pout Package
HMC733 Analog Devices 5.8-6.4 GHz -85 dBc/Hz +3 dBm QFN-24
HMC587 Analog Devices 6-7 GHz -90 dBc/Hz +4 dBm QFN-24
HMC732 Analog Devices 5.3-5.9 GHz -85 dBc/Hz +2 dBm QFN-24
ROS-5860+ Mini-Circuits 5.8-6.6 GHz -80 dBc/Hz +4 dBm SMD
ZOS-5750+ Mini-Circuits 5.65-5.85 GHz -92 dBc/Hz +4 dBm SMD

HMC862ALP3E is an x2 active multiplier from ADI/Hittite in 3x3mm QFN-16 covering 6.5-26GHz output. The HMC561LP3ETR provides x2 multiplication at 8-21GHz with +14dBm output power. The HMC564LP3 offers x2 at 14-28GHz for higher frequency LO generation. For passive multiplication, Mini-Circuits MK-2 series provides broadband doublers without DC power. The HMC-X2-0001 bare die offers x2 multiplication for hybrid module integration.

Recommend Parts

IRFS4310ZTRLPBF

IRFS4310ZTRLPBF – 100V N-Channel HEXFET Power MOSFET, 7 mΩ RDS(on), D2PAK (TO-263AB)

Brand: infineon

Package: D2PAK (TO-263AB)

IN STOCK: 11137pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSASJ105BB5475MFNA01

4.7uF 6.3V X5R MLCC, 0402, Taiyo Yuden

Brand: gigadevice

Package: 0402 (1005 Metric, 1.0 x 0.5 x 0.5 mm)

IN STOCK: 9701pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRF3415PBF

150V N-channel power MOSFET, 43A, 41mΩ RDS(on), TO-220AB package

Brand: infineon

Package: TO-220AB

IN STOCK: 2940pcs

Cargo cycle: 3-7 Days

The minimum order is 1

105017-1001

USB Type-C receptacle connector, 24-pin, SMD

Brand: Amphenol

Package: SMD (8.9 x 7.3 x 3.2 mm, right angle)

IN STOCK: 5335pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRLB3034PBF

IRLB3034PBF – 40V N-Channel StrongIRFET Power MOSFET (Logic Level), 1.7 mΩ (max) @ 10V; 2.0 mΩ @ 4.5V RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 9724pcs

Cargo cycle: 3-7 Days

The minimum order is 1

XC6SLX75-2FGG484I

Spartan-6 LX75 FPGA, 74637 logic cells, 132 DSP, 3096KB BRAM, 408 I/O, FBGA-484 23x23mm, -2 speed, industrial -40~100C, AMD Xilinx

Brand: xilinx

Package: FGG484 (484-ball fine-pitch BGA, 23x23mm body, 1.0mm ball pitch, 22×22 ball array, 6 I/O banks, lead-free)

IN STOCK: 890pcs

Cargo cycle: 3-7 Days

The minimum order is 1