Opens in a new tab

ICM7555IPA

CMOS 555 timer, 3-16V, 80uA Iq, 500kHz, rail-to-rail output, 8-PDIP

14684

Effective Inventory

Image for reference only

Manufacturer Part:

ICM7555IPA

Package:

8-PDIP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The ICM7555IPA from NXP Semiconductors is a CMOS general-purpose timer that directly replaces the bipolar NE555 while offering significantly improved performance: 80uA supply current, 20pA input currents, 500kHz maximum frequency, and rail-to-rail output. Packaged in 8-pin PDIP.

Key Specifications

Supply Voltage 3V to 16V
Supply Current 80uA (typ)
Trigger/Threshold Current 20pA (typ)
Maximum Frequency 500kHz (guaranteed)
Timing Stability 0.005%/C (typ)
Output Swing Rail-to-rail
Package 8-PDIP
Operating Temperature -40 to +85 C

Features

  • Direct replacement for NE/SE555 in most applications
  • Ultra-low supply current: 80uA typical
  • Extremely low input currents: 20pA typical
  • Rail-to-rail output swing
  • No supply crowbarring during output transitions
  • No CONTROL VOLTAGE bypass capacitor required
  • 500kHz guaranteed maximum frequency

Applications

  • Precision timing and pulse generation
  • Low-power oscillator circuits
  • Battery-powered timing applications
  • PWM and PPM modulation
Product Introduction: ICM7555IPA Product Introduction

The ICM7555IPA from NXP Semiconductors is a CMOS version of the classic 555 timer that provides significantly improved performance over the bipolar NE555. Key improvements include 80uA supply current (vs 3mA for NE555), 20pA trigger and threshold input currents (vs 100nA), 500kHz maximum oscillation frequency (vs 100kHz), and rail-to-rail output swing. The CMOS design eliminates the supply current crowbarring that occurs during NE555 output transitions, and the CONTROL VOLTAGE pin does not require a bypass capacitor. These features make the ICM7555 ideal for battery-powered and precision timing applications.

Working Principle: ICM7555IPA Working Principle

The ICM7555 uses CMOS comparators and a CMOS flip-flop instead of bipolar equivalents. Two comparators monitor the THRESHOLD and TRIGGER pins against internal voltage dividers at 2/3 VDD and 1/3 VDD respectively. In monostable mode, a trigger pulse below 1/3 VDD sets the flip-flop, driving the output high and releasing the discharge transistor. The timing capacitor charges through the external resistor until it reaches 2/3 VDD, which resets the flip-flop. In astable mode, the capacitor charges and discharges between 1/3 and 2/3 VDD through external resistors. The CMOS output stage swings rail-to-rail, unlike the NE555 which drops 1.5-2.5V from the rails.

Pin Description: ICM7555IPA Pin Definition and Functions
Pin Name Function
1 GND Ground
2 TRIGGER Trigger input (active low, <1/3 VDD)
3 OUTPUT Output (rail-to-rail swing)
4 RESET Reset input (active low)
5 CONTROL VOLTAGE Modulation/adjustment input (no bypass cap needed)
6 THRESHOLD Threshold input (compares to 2/3 VDD)
7 DISCHARGE Open-drain discharge output
8 VDD Positive supply (3-16V)
Application Scenarios: In which products and applications is ICM7555IPA used
  • Battery-powered timer circuits with 80uA supply current for long battery life
  • High-frequency oscillators up to 500kHz using high-impedance timing components
  • Precision timing with 0.005%/C stability without external bypass capacitor
  • PWM motor speed control with rail-to-rail output for maximum drive voltage
Alternative Models: What chips are recommended as replacements for ICM7555IPA
Model Manufacturer Key Difference
NE555P TI Bipolar, higher current drive, higher Iq
TLC555CP TI CMOS 555, 2MHz max, similar to ICM7555
LMC555CN TI CMOS 555, 1.5V min supply
ICM7556 NXP Dual CMOS 555 timer

Recommend Parts

RK73H1ETTP20R0F

20Ohm +/-1% 0.063W thick film resistor, 0402, +/-100 ppm/C, AEC-Q200

Brand: KOA Speer

Package: 0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

IN STOCK: 33180pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS77001DBVR

50mA LDO, adjustable 1.2-5.5V out, 35mV dropout, 17µA IQ, SOT-23-5

Brand: TI

Package: SOT-23-5 (2.9 x 1.6 x 1.45 mm)

IN STOCK: 5000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TPS61021ADSGR

3A synchronous boost converter, 1.8-5.5V, VSSOP-8

Brand: TI

Package: VSSOP-8 (3.0 x 3.0 mm, DSG package)

IN STOCK: 12398pcs

Cargo cycle: 3-7 Days

The minimum order is 1

S1MB-13-F

1A 1000V GPP rectifier, 1.1V VF, 3μs trr, SMB/DO-214AA, -65~150°C

Brand: Diodes Inc

Package: SMB / DO-214AA (4.57 x 3.94 x 2.50mm)

IN STOCK: 3679pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADUM5000ARWZ-RL

500mW isolated DC-DC converter, 3.3/5V, SOIC-16W

Brand: ADI

Package: SOIC-16W (10.3 x 7.5 mm, RW package)

IN STOCK: 6373pcs

Cargo cycle: 3-7 Days

The minimum order is 1

ADS830E/2K5

8-bit 60MSPS high-speed ADC, TSSOP-24

Brand: TI

Package: TSSOP-24 (7.8 x 4.4 mm)

IN STOCK: 9357pcs

Cargo cycle: 3-7 Days

The minimum order is 1